Question about Oldsmobile Cutlass Supreme

1 Answer

What are the steps to replace an alternator on an 1996 Cutlass Supreme 3.1L

Posted by on

  • 1calgarian Sep 11, 2008

    need to know what the torque spes are for the tension pulley and altenator bolts, thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

Disconnect the battery and remove the serpentine belt. Remove the rear alternator bracket. Disconnect the wires from the alternator. Remove the alternator bolts from the front bracket and remove the alternator. Pay attention to which bolts come from which holes. Install your new alternator in the reverse order. Snug the bolts, but don't overtighten them. If you need bolt torque values or run into any problems, write back.

Good luck and hope this FixesYa.

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you relace a turn signal switch on a 1996 oldsmobile cutlass supreme?


To exact step by step procedure to replace turn signal switch on your car.lease click on the following link mentioned below:--- http://technoanswers.blogspot.com/2011/03/how-to-relace-turn-signal-switch-on.html ---------------- This should help.Thanks.Helpmech.

Mar 01, 2011 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

How do I get the alternator bolts off of a 1988 cutlass supreme


this website should help,Tim:

http://www.ehow.com/how_6158650_remove-alternator-1988-cutlass-supreme.html

Oct 16, 2010 | 1988 Oldsmobile Cutlass Supreme

2 Answers

My 1996 cutlass supreme eill not start. when i turn the key i get no sound or anything


Check your battery connections. Take them off the battery and clean the posts and inside the + and - cables. If that does not help, the battery may be bad.

Mar 11, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Check engine light doesn't work at all in my 1996 cutlass supreme, emissions requires that it works.


you will have to remove the instrament cluster to replace the bulb that is most likely no good.

Feb 12, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

How to change a battery in a 1996 Oldsmobile Cutlass Supreme Coup


The bar is there to hold the battery in place, there is a rod that connects to the bar, and a nut on the end of the rod. Remove the nut, then remove the bar, and then replace the battery

Jun 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

1996 olds cutlass supreme when it get hot car will shut down any suggestions??


ignition control module!!!!! see it all the time , they get hot and brake down . Replace it and it will run like new.Hope this helps you out!

Jun 03, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Coil pack on 3.4L engine for 1996 cutlass ?


Try “autozone.com” or your local library for diagrams and step by step instructions.

Mar 08, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Turn Signals on 1996 Cutlass Supreme Don't Work


Did he replace the bulbs ? Check the bulbs and replace . Also check the fuse again.to see if it's blown.check all the bulbs and fuses to all the lights. They may be integrated in on or two circuits.

Jan 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...