Question about Mitsubishi Outlander

1 Answer

The acris making a wheezing sound as you drive...almost as though something is grinding or rubbing...the check engine light is on... the oil and transmission fluids are good..the car also hesitates when u drive.... is it possible that its a gas restriction problem of some sort

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You need to conect a scanner to the car,because the check engine light is on. then, the scanner give you a code, this code have a description of a trouble from a sensor or actuator in the electronic fuel inyection sistem. you need to check all around from this actuator or sensor before you replace it. example:

code 045: bad signal from oxigen sensor.
check exhaust manifold and piping before sensor to find holes..
you need to check electrical conector( see for phisical damage: broken, born, etc) of this sensor, the incoming voltage from computer, output signal to car´s computer. etc.
this is an example. you need to know what code have your car to fix it.

Posted on Aug 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinding/rubbing noise after transmission bearing repair. made a popping noise while driving at normal speed. starting making banging noise. gets louder the faster you go. changes gears fine though.


an educated guess would be that the flex plate isn't on correctly , id get it back to repair place , if flex plate is it and it falls off or breaks then input shaft will break as well !!

Oct 12, 2016 | Cars & Trucks

2 Answers

Can the oil pump in my vehicle make a rapping noise when it goes bad?


Sorry no one can touch this question .
Their is no good answer .
It sounds like engine is shot you see if the oil pump is bad the engine is had it .
The oil pump is the last thing to go in an engine its always lubericated .
And WHY did you descide to change just before this noise started something is missing with the problem .

May 12, 2015 | Cars & Trucks

1 Answer

My son thinks his a mechanic experimenting ,place a fan as big as palm size in the air induction hose ,he start the escalade and test drive ,he heard a grinding and then knocking sound in the engine, then...


could be the oil pump has failed grinding sound then knocking sound could also be the timing is out or failing that something forren has got into the engine. check all these out and don't run the engine you are making the engine worse. if pump for the oil has gone and the engine has been run can mean a new engine. if timing belt has moved could be a new head will be needed. and pistons. failed oil pump does more damage in the long run as the hole engine needs oil.

Oct 11, 2013 | 2007 Cadillac Escalade Two-Wheel Drive

1 Answer

I have a 2004 Saturn Ion. The car will not accelerate beyond 35 mph with the gas pedal totally to the floor. The car is making a wheezing like sound as she goes. The check engine light came on and the...


Have the cat converter check for failure and blocking the exhaust pipe. No codes will show . Test by hitting the cat converter with the heel of your hand and if it rattles get a new one.

Aug 21, 2013 | 2004 Saturn ION

1 Answer

Oil light on and beeping keeps sounding. i checked all fluid levels and they are fine. engine now makes a grinding sounds. any ideas?


it sounds like your oil pump is a gonner and if you keep on driving your engine will be too if its not too late already. stop driving it and get your oil pump checked

Apr 11, 2013 | 1997 Dodge Grand Caravan

1 Answer

After installing new front rotors and pads on a 07 Mercury Milan there is a bad grinding noise


Hi Julie, Check the back plates behind the discs. Some times after working on the brakes the back plates are bent and cause the sound you're reporting. The ABS rotors, if correct should not come into contact with the sensors. Are the brakes efficient when applied? If not make sure they have been installed the correct way around. I have known mechanics to fit them with the metal part of the pad rubbing onto the disc! Anything is possible. Regards John

Jun 24, 2012 | Cars & Trucks

1 Answer

I had oil change in my saturn 2001 sl after the oil and security and airbag lights started to turn on after 2 days car started making a knocking sound while driving. and it died on me when im at a stop...


best advice here is to ask a local mechanic to have a look as engine shouldnt have started knocking with teh new oil in unless someone has put tranny fluid into teh engine or something stupid ,the lights for the airbag shouldnt be connected but the oil light ?? Do not drive car untill a mechanic has come around and checked it out for you though as this oil light coming on and knocking noise is serious

Feb 22, 2011 | 2001 Saturn SL

1 Answer

The ABS light came on (stayed on) and the 4X4 HIGH light flashes. There is also a noticable grinding/rubbing noise coming from the front wheel-well when I'm making a sharp turn, going out of a tight space...


Here is my question

The ABS Light is on. For how long,and why are you here,v.s. having it checked out and repaired.
The grinding/etc,would have me putting the vehicle up on stands immediately, and checking it out. I would in no way drive it,like that

Sounds as though your wheel bearing,tone ring,abs sensor etc ,are being chewed up, and causing the code to set

Oct 23, 2010 | 2004 Ford Explorer

1 Answer

FLYWHEEL MAKES RUBBING NOISE WHEN WARM AND ACCELERATING


You have a grinding noise when it's running or when you try to start it?
There is an inspection cover just behind the oil pan of the engine. If you remove it you can see the teeth on the flywheel. Chances are that the flywheel may still be good and the starter drive (part of starter) may be failing. If so and you leave it that way it will damage the flywheel. On automatic cars it's called a flex plate. And yes if you have a chrysler trans on there the converter may have the ring gear welded on.

Apr 26, 2010 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...