Question about 2005 Buick LeSabre

Open Question

Center Console tray removal

Things are getting lost, I think, behind the center console tray. How do I remove it?

Posted by on

5 Suggested Answers

Tnsiouxfalls
  • 617 Answers

SOURCE: 1998 LeSabre center storage console doesn't open

Place the palm of your hand on the top and curl your fingers under the lip and press upward toward your palm,it should then open.When open you can fold the cup holder inside the console.

Posted on Dec 21, 2009

  • 1024 Answers

SOURCE: the center console lid is always broken. My

you can check with your local junk yards/ auto salvage and they can find what you need

Posted on Mar 13, 2010

  • 524 Answers

SOURCE: Buick Regal cup holder problem

Yes absolutely you can my friend. and you are correct this will fit 1997 to 2004 actually!

Posted on Apr 09, 2010

  • 7 Answers

SOURCE: need to replace center arm rest console where can

97 buick this car is kind of old i would go with a used auot part store ecology you should have no problem finding it there plus its an original part good luck

Posted on Apr 12, 2010

  • 1 Answer

SOURCE: where is fuse for drivers side heated seat on 2006 Buick Terraza

i have a 2005 terraza and the fuse panel is at the end of the dash board on the passengers side .there is a finger slot in a plastic cover,pull to remove. fuse panel is behind .i had to call a service tech to find mine. good luck pete.

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the top center dash storage compartment?


Kia Sedona Car & Truck Interior Consoles & Parts ' eBay

www.ebay.com/sch/Kia-Sedona-Car-Truck...Consoles.../i.html
eBayShop from the world's largest selection and best deals for Kia Sedona Car & Truck ...2002 2003 2004 2005 KIA SEDONA CENTER CONSOLE FOLDING TRAY TAN ....Overhead Console 02-05 Kia Sedona with Map Lights Clock and Storage ...

Center Console Removal - '05 Sedona - Kia Forum

www.kia-forums.com/...sedona.../30338-center-console-removal-05-sed...
Nov 11, 2005 - 5 posts - ‎4 authors I need to remove the center console in my 2005 Sedona so I can remove the stereo. ... address lol) so I have to pull the stereo and probably replace it. .... the right side of the pannel, as well as the hazard switch at the top of the ...

Oct 16, 2015 | 2002 Kia Sedona

1 Answer

How do I remove the center console of a Isuzu Ascender


why not read on alldata.com, its all there,
remove a screw?


25402002-5afre3fjdbg1gkzo1rpx5eib-3-0.jpg
  1. Block the wheels to prevent the vehicle from moving.
  2. Remove the rubber ash tray inserts and rubber mat from the console.
  3. Remove the floor shift control knob. Refer to Floor Shift Control Knob Replacement.
  4. Remove the center console shift lever bezel, Buick only. Refer to Console Shift Lever Bezel Replacement (Refer To List 1).
  5. Remove the console storage compartment. Refer to Front Floor Console Compartment Replacement.
  6. Remove the center console retaining screws.
  7. Adjust the parking brake to the full-up, or fully engaged position.
  8. Release the 2 forward trim extensions ears attached to the lower instrument panel (I/P), Buick only.
  9. Slide the console rearward and raise the rear of the console in order to expose the electrical connectors.
  10. Disconnect the electrical connectors, as necessary.
  11. Adjust the parking brake to approximately the halfway position.
  12. Remove the center console from the vehicle.
  13. If replacing the floor console base, remove the following and retain for transfer:
    • 13.1.
      Remove the HVAC control module (if equipped).
    • 13.2.
      Remove the armrest.
    • 13.3.
      Remove the HVAC module and duct assembly.
    • 13.4.
      Remove the cupholder.
    • 13.5.
      Remove the HVAC upper duct.
or read the FSM (buy one) factory service manual, its all there every step and photos too, (all cars. are like that)
or
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

log in, and see that. and more.

Feb 05, 2015 | 2006 Isuzu Ascender

1 Answer

How to remove cd player on 1999 acura el


acura cd player is the last to be removed. first start with center console.
push the seats for and remove the 2 screw on the side of console,2 more inside the storage,remove shifter cover and 2 more waiting underneath.remove ashtray,more screws behind,remove center console 3-4in.and now the radio cover is free to be removed. 4 more screw holding the radio.pull slowly and disconnect the wires behind.install in revers order.
dont forget!!! Acura radio have security code.
good luck

Apr 04, 2014 | Cars & Trucks

1 Answer

Acura 2006 RL coin tray


Remove the center console! Use a plastic pry tool and start around the shift knob. For more instructions google RL Dash/console removal.

Jan 06, 2014 | Acura Cars & Trucks

1 Answer

I'm an idiot and put my engagement ring in my change holder in my 2006 Chrysler Pacifica. When I went to put it back on, it was no where to be found. I believe it slipped behind the small crack


Print I hope this helps you,good luck.Randy


Removal & Installation

Instrument Panel

  1. Disconnect and isolate the battery negative cable.
  2. Remove the center console closeout panel by removing the left and right attaching screws, then the left and right panels.
  3. Remove or disconnect the following:

    Remove the shift bezel. Remove the transmission range indicator surround bezel. Remove the two screws attaching the front floor console to the lower instrument panel. Open the cup holder and remove the two attaching screws on the bottom of the cup holder. Open the bin and remove the two attaching screws on the bottom of the bin. Remove the front floor console sidewall attaching screws, three per side. Raise the front floor console and disconnect the wiring harness. Remove the front floor console from the vehicle.

    0996b43f807cb4f3.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of front floor console and shift bezel


    0996b43f807cb4f4.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of front floor console, showing attaching screws

  4. Remove the floor console base assembly by removing the two screws attaching the L-brackets to the instrument panel.
  5. Remove the nuts attaching the floor braces to the instrument panel.

    0996b43f807cb4f5.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of floor brace, attaching nuts, center brace, and floor bracket

May 02, 2012 | 2006 Chrysler Pacifica

1 Answer

Take the center console off how


The center console is secured by brackets and screws on the bottom of the center console. remove all trays in the console and you should be able to see them.

Apr 17, 2011 | Pontiac Aztek Cars & Trucks

1 Answer

Need to remove center console to replace seat belt. After removing 12 screws, console is still firmly in place. What else has to be done?


  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest from the floor console.
  2. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  3. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  4. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  5. Lift the floor console from the front and rear console panel mounting brackets.

Feb 27, 2011 | 1996 Ford Explorer

1 Answer

Center console disasembly instructions . we are trying to remove the center console


Base Console, Floor, Ranger, Explorer Removal and Installation
  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest (644A22) from the floor console.
  1. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  1. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  1. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  1. Lift the floor console from the front and rear console panel mounting brackets.

c758709.gif

Apr 01, 2010 | 1996 Ford Explorer

1 Answer

Clock bulb replacement


Sisters car has the same thing. I don't think they have a bulb to light up the clock. I'm not too sure. I might try again I had to repair the aircon switch before.

How to remove the clock.

You have to remove the center console to remove the clock. (Manual car version)

-Unscrew gear knob.
-Pull out gear shifter cover surround.
-Remove cover plate with small flat blade in little tray aft of the gear stick.
-Remove 2 screws revealed by cover.
-Remove 2 screws 1 on either side of the AFT (not middle) end of the center console.
-Remove aft half of center console.
-Remove 2 screws 1 on either side fwd of air con controls.
-Remove 1 screw underneath ash tray.
-Remove hazard switch and other switch next to clock using a flat blade to pry them out.
-Unclip switches disconnect plugs.
-Remove 2 screws revealed behind switches.
-Take your time to remove fwd console / dash trim (extra screws might be there to take out).
-Disconnect clock plug.
-Remove clock.

Let me know if there is a bulb in there

May 23, 2008 | 1998 Honda Civic

Not finding what you are looking for?
2005 Buick LeSabre Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...