Question about 1988 Toyota 4Runner

2 Answers

Back window won't work

Okay so, key in back , it rolled down, took out bags. did it back up, come back only a couple minutes later and it won't go down anymore.

there is no clicking noise when i turn the key. no the lock isnt on lol

im thinking that there is a fuse blown? anyone know where that is? cuz its not labled =(

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

The fuse for the rear window is a 30amp fuse located under the drivers side of the dash. It should be the only 30 amp fuse in that fuse box. Also there is a relay that controls all the functions of the back door. It is located inside the rear door. Let me know if you need any further assistance.

Posted on Aug 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my 87 4runner and what I found was that if the latches are not completely close it will not allow the window to activate (rust in the latch) remove and clean.

Posted on Sep 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 cabrio, my windows rolled down and won't come back up. what do i do???


Try putting the key in the door locks and holding it all the way to the right and they should go up. If not try turning the ket all the way to the left. Hope that helps

Mar 02, 2013 | 2001 Volkswagen Cabrio

1 Answer

Back passenger window won't roll back up, Chevrolet Cavelier


it could be the motor that rolls it up or the switch that may be broken.

Feb 01, 2013 | 2009 Chevrolet HHR

1 Answer

Driver door won't lock or open with key and window rolls down by itself


you will need to remove the door panel and check out the back of the key lock ,something is broke here thats for sure

Jun 15, 2012 | 2001 Toyota Highlander

1 Answer

I have a 2004 convertable beetle and I have had nothing but problems. When I try to put the top down it won't lock into place. When I get frustrated with it I just want to put the top back up and it...


I can not stop my car from dinging every time I put on the breaks. The sensor for the top is flashing but i know the top is closed. I need to find someone that knows how to disconnect the wire.

Jul 22, 2011 | 2004 Volkswagen New Beetle Convertible

2 Answers

2001 audi drivers side window will not roll up


can you hear the motor working? its possible the motor/regulator assembly has given up. have someone who knows audis' look at this and if the repair is too pricey given this joyous time of year(LOL) have them at least bypass the motor and prop or secure the window into place until the neccessary repairs acn be made. happy holidays.

Dec 28, 2009 | 2001 Audi allroad

1 Answer

Power windows not working


Sounds like a bad master switch, bad wiring to the drivers door, or bad body control module.

Jul 15, 2009 | 2001 Dodge Durango

2 Answers

Hi, My 2002 Chevy Cavaliers windows have started having trouble rolling up. It seems they roll down fine, it's just when you try to roll them up either the 'button' doesn't work at all or it works...


Try spraying silicone spray down the sides (felt) where window slides (guides) up & down. Put window all the way down, spray them well, top to bottom,then run window up & down a few times. May not cure it, but should help. Be generous with it, but a little clean up later may be needed.

Jul 13, 2009 | 2000 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...