Question about 2006 Chrysler Sebring

1 Answer

Sebring Problems please help

HI I have a 96 crysler sebring. When you first get in a nd start the car it runs normal,but after a few minutes when the car starts to heat up, if you give it gas it cuts out. If you keep giving it gas while its cutting out it will eventially die and whenit does it diesels. It will sit and idal all day long , if your barley give it gas enough to get the rpm above 2 1/2 and then hit the gas it wont cut out but if you just push the gas quickly it goes all to peices. Can anyone help me please. We have had it on the computer it did not throw any codes.

Posted by on

  • 1 more comment 
  • coonman08 Apr 29, 2009

    same problem

  • ronnea Jul 09, 2013

    my 2001 chrysler actssluggish when taking off and does not idle well, butwhen putting the pedal to the ground it takes off like a jet?

  • ronnea Jul 09, 2013

    it also has a low toned whining sound whenefver you are touching the gas pedal and gets louder the faster you drive?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Change air filter, Sparks and clean injectors.

Posted on Oct 14, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine will turn over freely but will not start. engine was running when it sputtered and died and will not restart on a 2000 Crysler Sebring Coupe, 2.5, 2 door. May have ran out of gas. added 5 gal but...


see if the cam is turning when trying to start the engine (look through the oil filler cap) if its not, you may have a broken timing belt (and engine damage) if it wasn't empty on the fuel gauge I doubt it ran out of gas.

Aug 29, 2011 | 2000 Chrysler Sebring

1 Answer

My 2000 Chrysler Sebring stops running. After a few minutes it will start again and run fine. This situation just started happenning a few months ago and is increasing in frequency


is the check engine light on??
i've done a few that had no light/codes.the most common problems are crank or cam sensor failures. really need to check when car stalls.
replacing crank sensor 6 mths ago & car has'nt had a problem. if you search these sensor on the sebring you'll find alot of info.

Jul 12, 2011 | 2000 Chrysler Sebring

1 Answer

Will my 2001 chrysler Sebring start with no engine coolant


Yes it will start and run, but I wouldn't run it for more than a few minutes without coolant, it will heat up extremely fast and will do damage if run longer than 10 minutes.

Feb 06, 2011 | 2001 Chrysler Sebring

1 Answer

2005 crysler sebring 4 cyl no start p 0340 code changed camshaft position sensor still no start. key engaged engin turn over, fuel present, no start, occasionally get a small backfire. HELP!!!


Try substatutting the ignition module with a known goog one.Also have the camshaft CIRCUIT checked at the camshsft sensor plug in, for propper voltage.The code P0340 indicates a circuit malfunction not a sensor malfunction. Good luck.

Dec 07, 2010 | 2005 Chrysler Sebring Conv

2 Answers

Is there any way to get heat faster in the morning? Even if I start the car and run it for a few minutes, I have to drive it a few miles to get any heat out of it.


have the thermostat checked and make sure the heater core is flowing. it may have a problem, or just be normal? is the temp gauge reading normal temp, or colder than it used too.

Nov 28, 2010 | 1992 Mercury Sable

2 Answers

Oil Change on a 2006 Crysler Sebring


c41abf1.gif


this the picture of the where is the drain plug located

Mar 24, 2010 | 2006 Chrysler Sebring

1 Answer

97 crysler sebring convertible wont start cranks but no fire replaced the timing belt and pullys distributer cap and rotter button the plugs and wires were replaced last month it has no fire the symptoms...


Hmmmm...are you sure when you changed the timing belt that all the timing marks were ligned up correctly?

Did you check to make sure you had no damaged valves?

Nov 16, 2009 | 1997 Chrysler Sebring

1 Answer

1996 sebring quits running


We just had a similar problem with my daughter's car. We replace the Idle Air Control Sensor ($225 including diagnostic and labor). It is running great now. Hope this helps.

Dec 26, 2008 | 1996 Chrysler Sebring

Not finding what you are looking for?
2006 Chrysler Sebring Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...