Question about 2004 Ford Taurus

2 Answers

Serpentine belt i need help putting my serpentine belt back on my 2004 ford taurus.i just need a diagram so i can see how to loop it around the different pullies.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 178 Answers

Hello two things you can do under your hood look very good ford usually has a routing diagram mounted on the top support of your radiator or off to the side it will be a pitcher of a front of a motor with pullys should show you with and without ac routing if not dont panic go to part store like auto zone get your self a haynes manuel that covers your year car the serpitine routine should be in there for your motor goodluck please rate

Posted on Oct 02, 2008

AUTO PARTS STORE HAS DIAGRAM IN PARTS BOOK

Posted on Oct 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Taurus serpentine 3.0diagram


Robert, Serpentine belt diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Ford Taurus 3 0L V6 1AAuto com
2003 Ford Taurus V6 3 0L Serpentine Belt Diagrams serpentinebelthq com
2003 Ford Taurus Belt Diagram Am Having Problem Getting My

Aug 17, 2016 | 2004 Ford Taurus

1 Answer

Serpentine belt on a 2004 Ford Taurus 3.0


Go HERE, select your model and engine and it will take you to a belt diagram.

May 26, 2008 | 2004 Ford Taurus

1 Answer

How do i put a serpentine belt on a 2004 ford taurus?


look under hood for belt routing diagram, then obtain belt and belt tensioner tool from advance auto and it will be easy. 10 min job. If no diagram draw one yourself then use that for reference.

May 20, 2010 | 2004 Ford Taurus

1 Answer

We took the serpentine belt off our 03 ford taurus and there is no diagram to put it back on


There should be a diagram under the hood.
Look at the pully's, those with grooves get that side of the belt and those without get the other side, work your way around the outside, doing the water pump last

Mar 06, 2010 | 2003 Ford Taurus

2 Answers

Need to make belt tighter is there a tension adjustment and if so where is it located


Serpentine belf is self adjusting the tensioner is spring loaded no adjustment, if weak replace it.If belt was replace make sure you have the right size belt, before replace tensioner.

Jan 06, 2010 | 2004 Ford Taurus

1 Answer

Replacing Serpentine belt 1998 ford taurus


should show on fan shroud belt routing.
on idler pully there should be square hole for 3/8 ratchet to go in and turn to loosen belt, but you have to hold pressure on it to take belt off one pully.and also to put back on.
[watch your knuckles]

Dec 18, 2009 | 1998 Ford Taurus

1 Answer

2004 ford taurus serpentine belt diagram... where to find?


Most serpentine belt manufacturers Have the belt diagrams on the back of the package,I know auto zone and NAPA do

Nov 19, 2009 | 2004 Ford Taurus

1 Answer

Belt inst


For the 3.0L Vulcan, you have a tensioner that is located just below the power steering pully. Use a 15mm wrench or the 15mm shallow well socket that comes in a Serpentine Belt tool to push the tensioner toward the rear of the engine compartment. Take the old belt off and route the new belt. The belt begins at the crankshaft pully, goes under and around the a/c compressor, up around the power steering pump, around (with the flat edge) the idler pully, around the alternator, the flat edge then sits against the tensioner and back around to the water pump pully. You should have a belt routing diagram on the underside of the hood just above the serpentine pully assembly.

Jun 23, 2009 | 1999 Ford Taurus

2 Answers

Replacing the serpentine belt


Theres not an easy way, i just had to do this on my ZX2. just put a 13mm socket on the tensioner pully, pull down on it to get it to release, remove belt, and then try to place the belt all around everything but the a/c compresser, then pull back down on the tensioner and wrap the belt around the a/c compresser since its right there on the bottom where you are pulling, so you can use one hand on the tensioner and the other to put the final loop around the compressor, if this doesn't work for you, try to wrap it all but around one of the other pulleys. Mine didn't have a diagram, heres one that i made in paintbrush to help you.

795fb64.jpg

Jun 03, 2009 | 2002 Ford ZX2

1 Answer

2000 ford taurus serpentine belt


to put this belt on you have to put it on the bottom pulley first and do all the loops and then do the tensioners last now if you do not have a diagram under the hood go to autozone or the place you purchased the belt from and ask them for a diagram

Oct 27, 2008 | 2006 Ford Taurus

Not finding what you are looking for?
2004 Ford Taurus Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...