Question about Dodge Ram 1500

1 Answer

Where is the module for the day time running lights on a dodge ram B 1500? 1996

Posted by on

  • Anonymous Mar 18, 2014

    How to change modulator valve 1996 Dodge ram

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

Notes CIRCUIT OPERATION - CANADA
On Canadian vehicles, the low-beam headlamps operate when the ignition switch is in the RUN position and the headlamp switch is OFF.

When the ignition switch is in the START or RUN position, circuit A1 from fuse 15 in the Power Distribution Center (PDC) connects to circuit A21. Circuit A21 powers circuit F18 through fuse 19 in the fuse block. Circuit F18 feeds the Daytime Running Module (DRL) module.

Circuit L20 from the headlamp switch connects to DRL module. Circuit L20 is HOT at all times.

The DRL module receives the vehicle speed sensor input from circuit G7. Circuit G34 from the DRL module provides power for the high beam indicator lamp in the instrument cluster.

Circuit L4 powers the low beams of the headlamps. When the headlamp switch is OFF, the DRL module powers the low beams on circuit L4. When the headlamps are ON, the multi-function switch powers the low beams on circuit L4.

Circuit L3 feeds the high beams of the headlamps. When the operator flashes the headlamps with the stalk of the multi-function switch, the DRL module senses voltage on circuit L3. When it senses voltage on circuit L3, the DRL module stops supplying power to the low beams on circuit L4.

Circuit Z1 provides ground for the DRL module.

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Dodge Ram 3500 Van runs fine, but will not move much. Previously would start in Park, now will only start in Neutral. After sitting for a few hours or a day it will run a few hundred yards but then...


Dumb question but, did you check the trans fluid? A torque converter can hold 6 quarts of fluid or more and if the van has sat for an extended period of time the fluid drains from the converter and will come out of the vent tube causing a no movement issue

Oct 21, 2013 | 1994 Dodge Ram 3500

1 Answer

96 dodge ram 1500 dash lights wont come on unless I have my dome light on.


u may hav to remove bulb on dome-its not hard---the wiring is old or thers some module issue thats gonna take $$ n time

Oct 15, 2013 | 1996 Dodge Ram 1500 Club Cab

2 Answers

I own a 1996 dodge 3500 van. My running lights stay on all the time unless I unplug the running light module. I tried changing the module however it does'nt make any difference.....


This happens because in Canada you must keep them lit during the day so they modified the wiring accordingly.
You must modify the wiring back to its original format: identify the command wire on the module and cut it out - this will shut them down. Then draw a wire from the cut one to the original switch on the dash.

Oct 09, 2010 | Dodge Ram 3500 Cars & Trucks

1 Answer

I get c-code 21-56 and 23-56 and i have no running light, brake ,turn lights work, dash lights work


Lighting module went south.Check to see if dodge has seperate modules for headlamps and parking lamps.

Jan 16, 2010 | 2004 Dodge Ram 1500

1 Answer

Dodge Ram 2500 4x4 running lights stay on after engine is off


IT SOUNDS LIKE THE DAYTIME RUNNING MODULE HAS FAILED..BEHIND FUSE BLOCK UNDERHOOD ON INNER FENDER..UNPLUG IT..IF LIGHTS GO OUT,YOU NEED A MODULE..ABOUT 100 BUCKS AT DEALER

Sep 19, 2009 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

02dodge ram ,running rough, black smoke out exhaust


Take it to an Autozone or O'Reillys and they will test the computer for you. It should have set a code, but you don't know if the code light works so its your best bet. Sounds like it is running rich and the crankshaft module is not advancing the timing.

May 11, 2009 | Dodge Ram 1500 Cars & Trucks

2 Answers

2001 dodge ram high beam indicator stays on


you likely have the wrong bulb in the headlight

Jan 07, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Running day lights,


I had a similar problem with my 2001 dodge 3500, the first thing I would check is to make sure that you in fact have high beams working when the light switch is turned on. The DR Lights use the high beam element of the headlamp and if they are burnt out then the DR lights won't be working. My problem was that I had no low beam headlights and everything else was working, turns out both low beam elements were burned out at the same time, replaced the bulbs and all was well. If this does not solve the problem then see if you can get a wiring diagram for the vehicle and go from there. It would seem strange that both of my elements burned out at the same time but that is exactly what happened.

hope this helps

Dec 04, 2008 | 2001 Dodge Ram 3500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...