Question about Mazda MAZDA6

1 Answer

How do I warm up cadillac below limit. Using a OTC Scan Tool.

Posted by on

  • yadayada
    yadayada May 11, 2010

    cadillac? are you sure that is the word?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 53 Answers

I think he means the catalytic converter. I think you just have to run the car and the scan tool should just monitor the temp so you can see where you need to be.

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix 2008 cadillac vehicle personalization error. My stereo audio doesn't work.


Gm tech2 scan tool or comparable aftermarket scan tool or drive it into the dealer

Jul 03, 2015 | Cadillac Cars & Trucks

5 Answers

Alternator change 2001 tdi


remove the unit from the power for one or two hours

and it will get reset

Oct 16, 2008 | 2001 Volkswagen Golf

1 Answer

2005 Dodge RM 1500 hEMI Lighting Bolt Light staying on. replaced throttle body now the light is blinking


Throttle body needs to be relearned. Need a oem level scan tool or equivalent. (Snap on versus modus) otc genisys or dealer tool. Once this is done the light will quit flashing and the truck will run correctly.

Mar 25, 2015 | 2005 Dodge Ram 1500

1 Answer

What are the symptoms of a bad PCM?


Symptoms of a Bad PCM , vehicle won't start an run sometimes ! You have other modules involved here ! ABS an BRAKE light lit are problems with the anti-lock brakes ! A sensor maybe ! You need to have the vehicles modules scanned for DTC's - diagnostic trouble codes . An depending what year , make an model vehicle it can have several hundred different codes possible. Newer vehicles have up wards of 10 or more modules .Your going to need a better grade scan tool like the one in this video ! Auto Repair The OTC Genisys Touch Scan Tool Sounds like you need to take this to a pro !

Feb 22, 2015 | Cars & Trucks

1 Answer

P0421 code bank 1 warm-up efficiency below limit


P0421 code is that the cat. converter is below efficiency. 99 per cent o the time the cat. needs to be changed. but if you have a scan tool watch both bank 1 O2 sensor 1 and bank 1 sensor 2.
cold they should be almost the smae but when its at operating temp, and running down the road at crusie speed the frt o2 should switch rapidly between .150 mv. and .850 mv. and the rear o2 should read about .600 mv. if they read the same the cat is ng and will have to be replaced.

Oct 28, 2013 | 2001 Mazda Millenia

1 Answer

High Idle


iac or wiring or pcm or coolant sensor get a iac from the dealor
if the rpm goes normal with scantool hooked up then try a pcm from wreckers

Feb 24, 2012 | Ford Thunderbird Cars & Trucks

1 Answer

Front ac vents blow cold air but rear seat vents blow warm/hot air.


On the right lower side of the center consuel after you take the cover off tou will see an actuator mounted to the ducting. this is a dual acting unit. They come with plastic gears and also a weak coupling that drives the doors in the ducting. One of the two is stripped and to repair the unit will need to be replaced. After replacement all door actuators need to be programmed. It takes a scan tool to do this. I don't believe any aftermarket scan tool can do that. A GM Tech 2 will do it. Thanks

Sep 03, 2010 | Cadillac DeVille Cars & Trucks

2 Answers

I cannot read troble code with scanner what could be the problem


WHAT KIND OF SCANNER? WHAT IS CAR TYPE? SOME 1995 VEHICLES USE OB1 AND LATER MODELS MAY USE OB2.

Jan 05, 2010 | 1995 Pontiac Sunfire

1 Answer

06 pt cruiser dtc p0108,p0113,p0123,and p0508 car will not start


P0108 (M)
Manifold Absolute Pressure/Barometric Pressure Circuit High Input
MAP sensor input above maximum acceptable voltage.

P0113 (M)
Intake Air Temperature Circuit High Input
Intake air (charge) temperature sensor input above the maximum acceptable voltage.


P0508 (M)
Idle Air Control Motor Circuit Low
Idle Air Control Motor Circuit input below acceptable current.

THESE DIFNITIONS ARE FROM THE FACTORY REPAIR MANUAL, LOOKS LIKE YOU MAY HAVE A WIRING HARNESS PROBLEM OR DISCONNECTED COMPONENTS, CHECK THE IAT AND MAP SENSOR AN MAKE SURE THEY ARE CONNECTED.

Mar 15, 2009 | 2006 Chrysler PT Cruiser

2 Answers

Unable to retriece codes from 1998 chevy blazer


i have run into this before on cheap scan tools for some reason they dont always read the codes. find some one that has a OTC or snap-on . there is a reason these tools cost 3-4 thousand dollars.

Sep 11, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...