Question about Daihatsu Charade

1 Answer

Daihatsu Sirion Can you tell me how to set the timing for the cam shafts

Posted by on

  • Anonymous Mar 24, 2014

    manual

  • Anonymous Mar 31, 2014

    how do I do it

×

1 Answer

I assume you are changing the timing belt. I am a mechanic and although not familiar with your vehicle, you would usually locate the timing mark on the bottom pulley and line this up. Careful not to turn the engine over too hard as pistons can strike valves. then you should look for similar marks on the camshaft pulley[s], and line these up. Then fit belt. This has to be tensiond correctly which is important. Hope this helps. Mike the bike01.

Posted on Aug 19, 2008

  • joseph andorful Oct 05, 2013

    hello sir can you assist to show up camshaft details by showing it to me

×

2 Suggested Answers

  • 98 Answers

SOURCE: 1999 Daihatsu Sirion

Your engine is probably an EJ-DE twin cam 12 valve.

Generally Daihatsu belts have marks on them that line up with dimples on the sprockets for the intial phasing. You rotate the engine to top dead centre on No1 piston and install the belt from there. The cams should be not be putting any pressure on the intake and exhaust valves of No1 when phased correctly.

Posted on Oct 10, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Daihatsu sirion o/d light keps comin on and off


Don't worry I'm sure you will get the solution of your problem, just check the link I attach.
Complete 2004 2010 Daihatsu Sirion Boon M300 Series Workshop Repair...

Aug 12, 2016 | 2006 Daihatsu Sirion 1.3

1 Answer

Gearbox not doing reverse and Now just revving after Gear 2


Sorry to tell you that you have a failed transmission and it will need to be rebuild or replaced.

Jun 28, 2016 | 2005 Daihatsu Sirion 1.3

1 Answer

I have Daihatsu sirion 10,the eps comes on, not all the time,and the power steering doesn't work correctly.


better take it to a dealer and have the brakes fixed before you kill or get killed driving it

Jun 13, 2015 | 2005 Daihatsu Sirion

1 Answer

What dos vvt system malfunction it mean ?


Variable Valve Timing System Malfunction, and possible causes - dirty or low engine oil
- Valve timing
- Oil control valve
- Variable Valve Timing controller assembly
- Engine Control Module (ECM)

Read more: http://engine-codes.com/p1349_toyota.html#ixzz38fIMYdTd

Jul 27, 2014 | 1999 Daihatsu Sirion

3 Answers

Is replacement of 2007 Daihatsu Sirion 1.3 fanbelt a relatively simple task or is it for a professional mechanic only?


DO IT YOURSELF... It IS fiddly but perfectly do-able.. easiest way to do it is to remove plastic 'dirt shield' from driver's side inner wing (next to drive shaft and brake line) obviously wheel removed, or rotated is ok.. removal of modern plastic 'tat' is simple (area of cylinder head) allowing as much finger access as possible..not much room down the side of these puppies!! Next you need to de-tension the 'serpentine' belt BUT I WOULD RECOMEND DRAWING BELT & PULLEY SET UP FIRST or taking several photos.. as a reminder of if belt goes over or under (makes sense when you see it) Use blunt engineer's screwdriver (or any blunt long driver, rod, etc) to help push and pull old and new belt about.. REMEMBER TO RE-TENSION THE TENSIONING PULLEY...BUT DONT OVER DO IT!! THE BELT WILL TIGHTEN EVEN MORE AFTER SHORT RUN IN.. ALLOW SLIGHT DEFLECTION.. 6 to 10mm should do... cleanliness is the key really, as with all engine jobs(!) Allow 2hrs to do... if you've never done before... ok?

Mar 04, 2013 | 2007 Daihatsu Sirion 1.3

1 Answer

Power steering not working


Sirion 2006 model power steering system have some failure in EPS motor. remove your power steering motor and clean and fix it. power steering system will ok.
if it is not good tell me please what is the error code

if you don't know what is the error code you can check that your self's

Feb 03, 2013 | Daihatsu Sirion Cars & Trucks

1 Answer

Where is cam belt situated on daihatsu sirion. Is it adjacent to the fan belt?. Would the cam belt affect the power steering?


THERE IS NO CAM BELT , THE TIMING BELT IS TURNED BY THE CAMSHAFT , THE POWER STEERING IS POWERD BY THE CRANKSHAFT PULLY WHICH ALSO POWERS THE ALTERNATOR,

Oct 25, 2009 | 1992 Daihatsu Charade

1 Answer

1999 Daihatsu Sirion


Your engine is probably an EJ-DE twin cam 12 valve.

Generally Daihatsu belts have marks on them that line up with dimples on the sprockets for the intial phasing. You rotate the engine to top dead centre on No1 piston and install the belt from there. The cams should be not be putting any pressure on the intake and exhaust valves of No1 when phased correctly.

Aug 13, 2008 | 1988 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...