Question about 1996 Toyota Land Cruiser

2 Answers

Base idle speed adjustment....1KZ-TE 3.0 litre turbo.

My prado idles really rough in drive but is fine in neutral. Appears to be the increased RPM smoothing it out. Does it have a base idle adjustment or is this "preset" with the ECU?? Thanks. Dennis.

Posted by on

  • Anonymous Mar 30, 2014

    how to check if egr valve system is working and how do I disconnect is there any benefit

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 46 Answers

Hi djay ,you need to check the vacuum pipes beneath the injector pump it they are intact and test them with a vacuum gauge. The work of this vacuum is such that when you put it drive the vacuum increases the idle speed slightly.

Posted on Dec 09, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 243 Answers

Hi djay,
the idle speed control can be adjusted on the pump by turning the adjusting screw that stops the accelerator lever.
Cheers

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the ignition timing for 2002 nissan hardbody 2000i 16v


Here are the 3 engines listed for this year. IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 2.4L SFI 4cyl

The Ignition Timing

18-22 DegreesBefore top dead center - When throttle positionsensor disconnected and using suitably programmedscan tool.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (750-850 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chock drive wheels, curb idle speed (700-800 RPM)transmission in neutral.

IGNITION TIMING

2002 Nissan/Datsun Truck Frontier Pickup 2WD 3.3L SFI SC 6cyl

The Ignition Timing

8-12 DegreesBefore top dead center - throttle position sensorharness disconnected.When adjusting idle speed, set parking brake & chockdrive wheels, curb idle speed (700-800 RPM)transmission in neutral.

Jun 05, 2015 | Nissan Hardbody Cars & Trucks

1 Answer

2005 kia Rio Cinco. Runs really rough when starting it up; running ok when gas pedal is depressed. At idle speed it is bogging out almost stalling???


what is the idle speed? 750 rpm in drive or 800 in neutral?
check that
check for loose or damaged vacuum hoses, and air filter box leaks

Aug 07, 2014 | 2005 Kia Rio Cinco

1 Answer

Car won't pull back speed when foot off accelerator


Very possibly a vacuum issue. Maybe a line that needs vacuum for the trans is on an inlet that effects the throttle. Not sure how old your vehicle is.

Aug 23, 2012 | Jaguar Cars & Trucks

1 Answer

92 NISSAN WITH BOGGING AT 2800 3500 RPM AND AT LEVEL SPEED 4CYL AND 5 SPEED


For this types of problem,there are few help inks to troubleshoot the problem.Click the link below to go through the troubleshooting procedure to resolve the issues :----Idles rough and quits when gas pedal is pressed less? http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html-----------van idles rough? http://howtobyme.blogspot.in/2012/01/2004-ford-freestar-van-idles-rough.html
--------------runs lean and idles rough? http://technoanswers.blogspot.in/2012/02/ford-runs-lean-and-idles-rough.html
-----------Car still runs Rough after tune up? http://howtobyme.blogspot.com/2011/12/car-still-runs-rough-after-tune-up.html
------------Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed? http://technoanswers.blogspot.in/2012/02/idle-flair-is-noticed-on-car-rough-idle.html
----------High rpm in neutral? Inconsistant high RPM in neutral? http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html
------------Engine Backfires? http://technoanswers.blogspot.in/2012/02/jeep-backfires.html----------- Nissan stalls and bucks on Acceleration?

http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-stalls-and-bucks-on.html

-----------
Nissan Pathfinder Backfires? http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-backfires.html
---------How to adjust rpm? http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
------------Engine cuts out at 3000 RPM? http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html
----------This will help.Thanks.

Feb 17, 2012 | 1992 Nissan Pickup

1 Answer

What are timing marks on 2001 kia rio 1.5 engine


3-13 Degrees
Application:
With manual transmission

Note :
Before top dead center, at specified curb idle speed.
Locate data link connector & connect jumper wire
between ground & engine test terminals.
After completing adjustment, remove jumper wire.
Curb idle speed (750 RPM) transmission in drive.

3-13 Degrees
Application:
With automatic transmission

Note :
Before top dead center, at specified curb idle speed.
Locate data link connector & connector jumper
wire between ground & engine test terminals.
After completing adjustment, remove jumper wire.
When adjusting idle speed, set parking
brake & chock drive wheels.
Curb idle speed (750 RPM) transmission in neutral

Aug 18, 2010 | Kia Rio Cars & Trucks

1 Answer

Vibration problems in 1kz te


Check calibration. Muffler supports from the front till the back, there should be proper clearance. Is your diesel fuel of proper cetane rating for the engine? Check your belt drive system, is there any part that is excessively draining engine power, power steering pump, air con compressor, alternator or generator? Do these preliminary steps and isolate.

Nov 29, 2009 | Toyota Pickup Cars & Trucks

1 Answer

Landcruiser KZJ95W engine problem


hi, better check the TCV (timing control valve) located below the injection pump.

Jun 27, 2008 | 1996 Toyota Land Cruiser

Not finding what you are looking for?
1996 Toyota Land Cruiser Logo

1,524 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...