Question about 1990 Dodge Ramcharger

1 Answer

Help! windsheild wiper motor

The plastic clip either goes in the hole first and snaps in or does the clip go all the way down on the rod and then slides into the hole? is the clip suppose to be flush with the arm when inserted?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

I'm assuming you are referring to the teflon bushings in the wiper arms?

Post your problem on the vehicle help board or do a thread search at Ramchargercentral.com...the crew over there will be able to walk you through the procedure step-by-step.

Posted on Aug 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace wiper motor


Most wiper units are attached to the firewall. Some have removable plastic cover valances which allow access to the wiper blade rods (called a wiper transmission). Others have some slack in the wiper rods with enough play to allow for you to remove a retaining clip holding the parts to the motor. Do not have butter fingers here. Do not drop the retaining clip. Just remove the wiper mounting bolts and slide out the motor.

Aug 13, 2015 | 1993 Mercury Villager

1 Answer

Replace door handle


You must be talking about the door handle itself. The rod connects the door handle to the door latch. The plastic clip when snapped onto the rod will keep the rod from coming out of the hole in the door handle where it attaches. Is it the handle that is broke or the clip?

May 23, 2013 | Chrysler 300M Cars & Trucks

1 Answer

Windsheild wiper wont move


Check to see if the nut is tight on the wiper down at the bottom, secondly turn the wipers on and put your ear down by the wipers to see if you can hear the motor moving. If you hear the motor moving the arms under the plastic sheathing have seperated. Try the nut first see if that fixes your problem then try the rest.

Jul 13, 2012 | 2007 Mitsubishi Endeavor

1 Answer

Windsheild wipers came lose from motor how do i reattach them


replace the plastic locks in the arms that connect to the motor and snap them back in place. I just fixed the same problem on my 1994 dakota

Nov 14, 2010 | 1994 Dodge Dakota Club Cab

1 Answer

Delay wipers only work on high speed on 2000 chevy silverdo 1500 truck no delay


Hello, my name is Ben and I can help you with this problem. This is a very common problem with Chevy. You need what is known in most vehicles as a "pulse board". The pulse board is located inside the wiper motor control module. On many vehicles the pulse board is replaceable, unfortunately on your Silverado you must replace the entire Wiper Motor Control Module which is bolted onto the top of the wiper motor. To get to the wiper motor, first remove those little nut covers on the big end of the windshield wiper arms, if you slip a small screwdriver or your fingernail they just pop off. Now unbolt the windsheild wiper arms, before removing the wiper arms, mark their location on the windsheild with a grease pencil or magic marker. The arms are hard to remove, you need to kinda wiggle and pull at the same time, now that long plastic cowl needs to come off, those clips at the front edge just slide forward, then at each end lift up that rubber flap and remove those TORX screws. Remove the cowl and set it somewhere SAFE, it's easy to break. You will now see the control module mounted on the wiper motor, unplug the electrical connections and remove the TORX screws holding it to the motor. Assembly is the reverse of dis-assembly. If you have any trouble or questions, feel free to ask, Ben.

Nov 13, 2010 | 2000 Chevrolet Silverado

1 Answer

2007 silverado tailgate stuck closed r bar no longer connected to handle...help


EACH rod has a plastic clip that holds rod to tailgate handle you probably just need to replace the clip. it is a plastic clip that locks on rod insert new one in handle then install rod and snap clip down. to gain access you will have to remove tailgate bezel and these usually break when removing.

Feb 17, 2010 | 2006 Chevrolet Silverado

1 Answer

01 bug I am having trouble removing the wiper access


First Remove The Wiper Arms Both, Then Check For Other Screws And Clip Holders, Be Soft Hnaded Before Removing Plastic Clips.Thanks

Jan 15, 2010 | 2001 Volkswagen Beetle

1 Answer

The rear wiper on my 99 Bravada has quit working. It made about 2 passes over the window before it completely stopped. How do i go about replacing the rear wiper motor?


Unscrew inside panel on tailgate (3 screws-1 each side, 1 in the middle), unclip and remove by pulling up and out towards the rear. Unscrew all screws holding steel plate down, unclip plastic clips that hold the rod running behind the plate and unhook rod at top of that opens the window. Unclip wiring harnesses, remove wiper from the outside (1 nut holding it down)and unbolt the motor. It is pretty self explanatory once you have the steel plate removed, just remove and install the screws and clips in the same order and try it out before you put all your screws back into the steel plate since there are so many. Back window must be closed for wiper motor to work. To save yourself from replacing the motor with a new one, 9 out of 10 times it is simply the locking washer has come off of the gear inside the motor, if you pop off the plastic motor cover you will see the washer is off the gears are out of place. I realigned the gear and replaced the washer with a "C" clip and it has been working great for over a year!

Dec 08, 2009 | 1999 Oldsmobile Bravada

2 Answers

How to Replace a rear Windshield Wiper Motor


Unscrew inside panel on tailgate (3 screws-1 each side, 1 in the middle), Unclip and remove by pulling up and out towards the rear. Unscrew all screws holding steel plate down, Unclip plastic clips that hold the rod running behind the plate and unhook rod at top of that opens the window. Unclip wiring harnesses, remove wiper from the outside (1 nut holding it down)and unbolt the motor. It is pretty self explanatory once you have the steel plate removed, just remove and install the screws and clips in the same order and try it out before you put all your screws back into the steel plate since there are so many. Back window must be closed for wiper motor to work. To save yourself from replacing the motor with a new one, 9 out of 10 times it is simply the locking washer has come off of the gear inside the motor, if you pop off the plastic motor cover you will see the washer is off the gears are out of place. Just realigned the gear and replaced the washer with a "C" clip and you just hopefully saved your self some money. Good luck friend and hope this works. keep me posted, be glad to answer any question you may have. 

Jul 02, 2009 | 1998 GMC Jimmy

1 Answer

Rear wiper motor reaplacement needed 2002 Chevy Trailblazer


use a medium size flat head screw driver and only pry up where there is an clip. there should be quite a few on the back hatch. so if you do break one or two it will still hold together well. and be sure when you change the motor to mark the splines that the wiper goes on so that when you reassemble it the wiper will go all the way across the window and return all the way back down.

Mar 14, 2009 | Chevrolet TrailBlazer Cars & Trucks

Not finding what you are looking for?
1990 Dodge Ramcharger Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...