Question about Saab 9000

1 Answer

How to replace the Clutch Slave Cylinder - 9000 Saab Cars & Trucks

Posted by on

  • skoooch Aug 21, 2008

    Thanks Alot for the advice... Is it something easily done by myself?



  • dragonwar29 Dec 14, 2008

    trying to replace a throw-out bearing for a 93 chevy k-1500

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Hi, your slave cylinder is not to hard to replace just be carefull with the tread at the fitting ,first disconect the line and then the screws that holds it ,be sure to install the little shaft back correctly, after you finish be sure to bleed the cilinder ,(carefull with the tread at the fitting)......

Posted on Aug 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission not shifting


If it's a manual transmission,then maybe your clutch slave cylinder is bad,check your clutch fluid reservoir,if empty then it's bad and needs replacing,should have fluid around it.Here's a link to replacing your clutch slave cylinder. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Here's a picture of the part. Clutch Slave Cylinder at AutoZone com Best Clutch Slave Cylinder Parts for... Also check your master cylinder,could be bad.Here's a link to the part. Clutch Master Cylinder at AutoZone com Best Clutch Master Cylinder Parts... Here's how to replace the clutch master cylinder. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE And lets not forget to bleed it,here's a link for that. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE The brakes and clutch share the same reservoir.The end....

Jun 05, 2015 | 2000 Mercury Mystique

1 Answer

Where is the slave cylinder for the clutch located. internal or externaly.


First thing to do is to see if you have a clutch slave cylinder or cable operated clutch. Second the slave cylinder is on the end of the lever that goes into the clutch housing Before you change the clutch make sure that the problem is not in the slave cylinder or clutch master cylinder or cable as the case may be.

Jun 09, 2013 | 1998 Dodge Avenger

2 Answers

What could cause a clutch pedal in a 1996 honda accord to lost pressure


no fluid in the clutch reservoir due to a failed clutch slave cylinder
time to replace both the clutch slave and master cylinder

Dec 02, 2017 | 1996 Honda Accord

2 Answers

Where is the 1999 Saturn SL2 slave cylinder located?


on a manual transmission the Clutch Slave Cylinder is located on the drivers side front of the transmission. You can locate it by first finding the clutch master cylinder on the drivers side of the firewall. Then fallow the plastic line to the front of the transmission.

To remove the slave you will first twist it then pull it out of the transmission.

The clutch slave and mater cylinder are replaced as an assembly.

Oct 07, 2011 | 1999 Saturn SL

2 Answers

Replaced whole clutch and slave cylinder on 1996 Toyota T100 2wd 2mos. ago. Today while driving the clutch hit the floor. I did'nt see any fluid leakage. Any ideas.


Sounds like you need to bleed the system again, or you have an air leak. try bleeding again and just check your fittings for tightness.

Jan 20, 2011 | Toyota T100 Cars & Trucks

1 Answer

2001 mercury cougar, master cylinder ran dry because slave cylinder below is leaking at the firewall. I filled the master cylinder and tried bleeding the clutch at the transmission until fluid stream...


No, you don't need to replace the clutch itself.
Don't be surprised if the slave cylinder replacement doesn't fix it.
Could be the master cylinder.

Sep 12, 2010 | 2001 Mercury Cougar

5 Answers

Stuck clutch pedal on a Mazda B series truck


Replace both clutch slave and master cylinders, and bleed well. I've also had this happen.

Jul 11, 2009 | 1988 Mazda B2200

1 Answer

Clutch pedal goes to floor


Its sounds like a bad clutch cylinder or bad slave cylinder or fluid leaking. First check brake fluid level in clutch master , and check for a leak in clutch system. If there are NO leaks, then you either have a bad clutch cylinder or a slave cylinder. Bleed clutch at bleeder screw on slave cylinder and make sure there is pressure from master cylinder. If there is pressure then slave cylinder may be bad replace slave and bleed and that should take care of you problem. If master is bad then replace bleed system ad you should be good. Contact if you need more help. Thanks for using FIX YA.

May 16, 2009 | 1988 Honda Accord 4 Door

1 Answer

After replacing starter and removing slave cylinder, clutch fails to work


sounds like you have a air pocket or you fail to engage the slave cylinder push rod If you disconnected the slave cylinder from the hose proceed to bleed out the slave cylinder if you didn't take you slave cylinder and whit out disconnecting the hose and make sure the push rod is against the clutch push arm.

Apr 20, 2009 | 1992 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77514 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...