Question about Mitsubishi Lancer

1 Answer

92 gsr lancer

My lancer has starting running ****, its idling under 500rpm and sounds like its running on 3 cylenders?the engine check light has come on as well?i un plugged the a.f.m and it didnt make a diference?any help please

Posted by on

  • skuxdelux Aug 18, 2008

    how do i pull the code?spark plugs look not in the best condition they have a bit off brown on the white bit, my mate said he pulled the 2 middle leads of the spark plugs but it didnt make a difference?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 53 Answers

Well if you have a check engine light pull the codes, but the way you're explaining it you prolly have a miss on one of you cylinders. Pull the code but you will wanna look into replacing your spark plugs and wires maybe even distributor cap and rotor depending on how long it's been since you've done so

Posted on Aug 18, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1998 caddi runs sluggish after checking i found that cylenders 1247 not recieving fuel what can this b

Bad injector or injectors not getting proper lower..noir lights help for this

Sep 09, 2014 | 1998 Cadillac Eldorado

1 Answer

Truck starts low idle about 500rpm, sputters then

have some one check the mass air flow sensor or idle air control

Mar 02, 2010 | 1999 Chevrolet K1500

2 Answers

92 lancer gsr won't go into first gear.Goes into all other gears

from what your explaining your syncronizing gear are out off alignment for first tranny shop fix you may have a adjustment externally on your tranny

Sep 11, 2008 | Mitsubishi Lancer Evolution Cars & Trucks

1 Answer

Checkengine came ON

sounds like a turbo problem. may well be a loose connection to your ecu as there isnt a sensor on your turbines. .

Sep 05, 2008 | Mitsubishi Lancer Cars & Trucks

2 Answers

1992 Mitsubishi Lancer GSR, 4wd 1.8 dohc turbo, cd5a, 4g93-t engine.

first thing to do is remove spark plugs and if they smell really fuely you will need to change them if that doesnt help you will need to get the microtech tuned for a good coldstart , this depends on if its running stand alone or as a piggy back
please leave feedback.

Jun 30, 2008 | 2002 Mitsubishi Lancer

1 Answer

1992 lancer gsr 1.8 dohc turbo. 4g93t eng cd5a chassis. start trouble shoot

9.3 is a really dead battery - replace it and check the alternator. I have seen them go bad with no dash indication. As to the oil being black, you may have worn piston rings, and probably need an engine re-build. Worn rings allow the exhaust of the engine contaminate the oil - you should also see increased oil consumption due to the vapors exiting via the PCV valve and being burned in the engine.

Jun 30, 2008 | Mitsubishi Lancer Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides