Question about 2000 Isuzu Trooper

1 Answer

How to install fuel filter on 2000 trooper

????????????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

First: Take the keys out of the ignition and put them in your pocket. Block the wheels so they won't move.

The filter is located on the frame just in front of the right rear wheel. Slide under from the other side and soak the fittings with penetrating oil. Loosen the fittings (may be under pressure!) the gas will drip out, Remove the bolt holding the filter to the frame, remove and replace the filter..

Posted on Oct 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuel cutoff switch on a 2000 isuzu trooper


which engine, ill toss coin, land on v6
check fuses first.
wont crank? that grrrrr grrrrr grrrrr sound
jumper cable start it yet, why not?
or put in a known good charged car battery?
or using any battery charger charge yours?
or buy a new battery, (if rich)

if it cranks and wont start?
check spark x6 (scan it yet?)
if sparks ok try test fuel!
if test fuel fails 100% see bad belt below.

EVER REPLACE THE CAM BELT?
if not and over 60k on the last one
the belt is doomed, living on borrowed time.
got the V6?
58409f45-e1b7-4b56-bd4c-6ca9870d63fc.jpg

Jan 07, 2016 | 2000 Isuzu Trooper

1 Answer

DOES 2000 ISUZU TROOPER HAVE A CABIN FILTER


I've no idea what a cabin filter is.

Jul 08, 2014 | 2000 Isuzu Trooper

1 Answer

Fuel filter


It runs along the rocker panel underneath the passenger side or driver's side but in front of the rear wheels. It is canister shaped.

Mar 26, 2014 | 2000 Isuzu Trooper

1 Answer

Stalls in gear, shudders while accelerating.. Cannot Resolve.


PO300 code means miss fire on the cylinders, That is usually caused buy bad spark plugs end wires,PO401 code means a problem with the EGR ,Valve Sticking.

Oct 18, 2012 | 2000 Isuzu Trooper

1 Answer

My trooper cranks over when started but the engine


NEED SOME MORE INFO... FIRST WHEN YOU TURN KEY TO THE RUN POSITION DOES THE CHECK ENGINE LIGHT LIGHT ON THE INSTRUMENT CLUSTER.. IF SO YOU KNOW YOUR COMPUTER IS POWERING UP... SECOND NEED TO KNOW WHAT IS MISSING...1...SPARK....FUEL OR INJECTION.. PULL ONE PLUG WIRE OFF COIL PACK HAVE SOME ONE CRANK CAR DO YOU SEE SPARK JUMPING ON COIL... SECOND SINCE YOU VERIFIED FUEL SYSTEM.. NEXT IS TO PLUG ONE PLUG AND SEE IF IT IS WET WITH GAS OR DRY LET ME KNOW AND I WILL HELP FURTHER

Sep 01, 2009 | 1999 Isuzu Trooper

1 Answer

Isuzi trooper diesel jerking when driving


Hello, it is possible that the pump is going bad but, it sounds more like water in the fuel or a dirty filter or dirty injectors. I would try a fuel additive first to see if that will clear your problem. Let me know if you need any help. Good luck.

Jan 23, 2009 | 2000 Isuzu Trooper

1 Answer

My isuzu trooper wont start after changing the fuel filter?


You must pump all air out of the fuel-system, and try again.

Jan 23, 2009 | 2000 Isuzu Trooper

1 Answer

Fuel filter change out in 2002 isuzu trooper


easy under the driver side need fuel tool from auto store. 30 min or srew driver push the clips in and pull. carefull lots of gas...

Nov 19, 2008 | 2002 Isuzu Trooper

Not finding what you are looking for?
2000 Isuzu Trooper Logo

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...