Question about 2006 GMC Sierra

1 Answer

Fog lights i need to know if when i am putting in my fog lights in if i have to cut out the whole hole on the truck

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 372 Answers

If you got the factory lights yes cut th entire hole out. Those light can get pretty hot and can really use th space. This will insure they dont melt the bumper cover

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a second generation xterra, I want to instal some fog lights on the bumper and it has factory holes with, what seems to be removable round covers. My question being, those factory cut out holes are...


probably not but you can measure the lights and the holes to see it they will fit when the plug section is removed. Sometimes it is wiser to get genuine as they will come with all the harness to fit the lights.

Nov 30, 2013 | Cars & Trucks

1 Answer

How do i remove the front bumper on a 2013 kia sorento


why take bumper off if your model was equipped for fog lights the wire plugs are already there as well the caps on the bumper should be screwed in place just go underneath and remove the caps and find the wires then put in a set of lights that fit in the hole or cut out the covers to fit your lights in saves a little of taking the bumper off

Sep 20, 2012 | Kia Sorento LX Cars & Trucks

1 Answer

How to replace the fog lights


Actually, your manual (if you have the Touring Model) says the following:

Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.

Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.

Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.

Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.

Push the electrical connector onto the new bulb.

Turn on the fog lights to test the new bulb.

Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.

Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.

I would take another look for the hole in the splash shield. You will need a socket wrench to remove the bolt. It is always possible that there may be a plastic cover disk of something of that sort covering the hole, or you might have to remove the splash shield itself (I doubt that), but the bolt is there. Take your time, you'll find it.

Hope this helps you.

Jan 12, 2010 | 2005 Honda Odyssey

2 Answers

1993 Jeep Grand Cherokee. Heater core leaking, chk engi light on.


it sounds like coolant was also spraying the engine or something,but you need to have the codes read to know exactly whats going on.

Dec 26, 2009 | 1993 Jeep Grand Cherokee

1 Answer

Replace fog light bulb for 2006 Honda Odyssey


Touring Model
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.

Nov 22, 2009 | 2006 Honda Odyssey

2 Answers

My headlights on bright and fog light is not working. I have changed the bulbs and they still don't work. The fuses seem to look okay. What else should I look for? Do they have another fuse or circut fuse...


Most fog lights turn off when you put your brights on. Check their operation in normal mode first, if they turn off when you turn your brights on... this is normal.

To disable this you need the wiring diagram for your car, you will have to cut 1 wire to be able to have all your lights on at the same time.

Nov 04, 2009 | 2000 Pontiac Grand Prix

1 Answer

Upper reverse lights light, bottom two don't


Are there bulbs in the bottom two and is there a hole cut out for sockets in the bottom?


I know some cars have more than one set of lights, as they are made universal for all over the world. Example, Santa Fe has lower fog lights in the bumper, but these are duds in North America as it's just a housing. In UK these lights actually have holds cut into them with sockets, bulbs and wiring.

Aug 17, 2009 | 2002 Buick Park Avenue

1 Answer

99 A4 tali light assmbly missing top bulb passenger side


That's the rear foglight socket. The rear foglight idea is European, and they ship the Audi over with a rear foglight as well, but it's only on the driver's side (that's the way rear fogs are done in Europe). That socket is fully powered though, and wired to the same dash switch as the driver's side rear fog. What you can do (what I did on my 99 A4) was to use a drill and **** out the rectangular opening in the rear taillight panel, and then put a bulb in that socket. Voila, instant dual rear fogs.

This is a good idea because in Europe, the police understand that a rear fog is only on one side. In the US, our police don't always know that, and you may get pulled over if you have that on - they may think you have a blown taillight bulb. Do the dual fog mod as described above - it'll save you the hassle and it looks better too.

Feb 08, 2009 | 2006 Audi A4

1 Answer

Drivers side reverse light on while i drive.


Your car has rear fog lights. The rear light that you see come on with your headlights is your rear fog light. The light in your dash is the rear fog light indicator. To turn off your rear fog lghts push your headlight switch in half way. To turn off your front fog lights push in all of the way.

Jan 13, 2009 | 1999 BMW 328 Series

1 Answer

How can install fog light on chevy cavalier 2002


is there 2 blanks on the bumper that need to be cut out. did you get instructions.

Nov 22, 2008 | 2005 Chevrolet Cavalier

Not finding what you are looking for?
2006 GMC Sierra Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...