SOURCE: when I try to start
If any of the gauges are blinking and going haywire and the security light flashing then the instument cluster is faulty.But if it is just the security light flashing then its in the switch.If you only had the switch replaced then you need a new ignition lock cylinder because its worn out.
SOURCE: key stuck in ignition but it will turn, and
you most likely have a bad key switch cylinder assembly. you can try to spray wd40 solvent into the switch before you have the switch replaced,but sometimes it's a switch replacement that repairs the problem. have you inspected your ignition key to look for damage to the key itself? try a spare key to make sure it's the key,and not the key switch. you can also try turning the key while turning the steering wheel at the same time to get the key to work.sometimes the switch locks when parked in a bind,such as on a hill,or against a curb and so on. try this 1st before you have the ignition switch replaced. AAA auto club,if you're a member covers part of the replacement costs for a replacement switch also. you may have coverage through a cell phone also.one more thing to try, if you have a tilt steering column,try to reposition the steering wheel to see if you can get the key to turn. remember never force it enough to break your key off into the switch! thank you for choosing fixya.com!
SOURCE: car won't start, security light
The ignition switch and ignition lock cylinder need replaced
SOURCE: Hello I have a 2002
Yes there is a bypass. Costs about $200.00. You should be able to put the key close enough to the cylinder to get the security to go off. I don't know what you did to get the cylinder out. but there is a chip mounted to the steering column. once the key is close enough to it it will let the car start. If you broke the chip getting the cylinder out then you have some money to put out to get it running.
SOURCE: security light blinks car won't start
The process for the passlock relearn is correct. If by chance the relearn does not work, you may have a fail component in the system. Go to this link for options to fix this yourself.
http://vatspasslockpasskeysecurityhelp.yolasite.com/
211 views
Usually answered in minutes!
×