Question about 2005 Chrysler 300

1 Answer

Chrysler 2005 Won't get out of the gear park.

Posted by on

1 Answer

When you push the break pedal an electromagnet releases the gear knob. check the wires to this electromagnet. this should fix your problem hopefully.

Posted on Aug 22, 2008

5 Suggested Answers

  • 14 Answers

SOURCE: 2005 Chrysler 300C will start

the relay for the shifter is not working. when you press the brake do you hear a click if yes the lock is stuck at the shifter if not check for power at the relay.

Posted on May 16, 2009

Molson02536
  • 3854 Answers

SOURCE: my 2005 chrysler 300 wont shift into gear. It's in

One reason for that I have experienced is when the torque on the parking pawl inside the transmission is particularly great, such as if you put the trans in park on a steep incline. If that is the case, then if you can recruit a husky by-stander or two to push on which ever end of the car is low so as to take the pressure off the pawl it will release. Even on level ground there might be something that is putting torque on the front wheels, so gently rocking the car back and forth might free it up.
The other thing to is the shifter lock has broke and needs to be replaced but there is a over ride for you to unlock it but you need to remove the center console where the shifter is to get to it. Here is a link that helped me with the inlaw's car. http://www.lxforums.com/board/showthread.php?t=73876
Good luck and hope this helps. Keep me posted, be glad to answer any more questions.

Posted on Jul 12, 2009

  • 295 Answers

SOURCE: 2005 chrysler stuck in park

remove the rubber cover on the right side of the shifter. there is a pink tab press it down with a long screw driver if it still down not come out of park replace the shifter the interlock spring is broken. Hope this helps please rate if it does.

Posted on Sep 04, 2009

SOURCE: My gear shifter won't move out of park on my 2006

have your transmission fluid drained and replaced. after replacing the fluid, try to move the gear shifter, if still does not work, have your transmission checked by a transmission mechanic for detailed diagnosis

Posted on Aug 05, 2011

Autotroubles
  • 980 Answers

SOURCE: I have a 2005 Chrysler 300, As I shifted the car

Go to the Prindle switch where the cable meets the transmission and check if it has not unhooked. Move the shifter all the way to the Park position and adjust/tighten.

Posted on Nov 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Chrysler Pacifica. It is making a grinding noise, and won't drive,reverse or stay in park. It was shifting gears perfectly before everything stopped working. Any idea?


Check the CV axles first. They can pop out and cause your noise and won't keep the vehicle from moving in park. Replace the axle/s if they did.

Sep 22, 2016 | 2005 Chrysler Pacifica

1 Answer

Why it will not go into gear?


check to see if the brake lights are working. some cars have a lockout for the gear shifter that won`t allow you to shift out of park if they are not working. it is wired into the brake light switch so when the switch or fuse is not working then the car won`t shift out of park.

May 26, 2014 | 2006 Chrysler Pacifica

1 Answer

I have a 2005 Chrysler 300, As I shifted the car from park to reverse I heard and felt a pop in the gear shift. The gear shift moves but the car is stuck in low.


Go to the Prindle switch where the cable meets the transmission and check if it has not unhooked. Move the shifter all the way to the Park position and adjust/tighten.

Nov 03, 2011 | 2005 Chrysler 300

2 Answers

My car won't go out of park. Shjould I get it towed or is there another solution. 2005 Chryslerr 300


i just had this problem 3 weeks ago, when i tried to move the stick down it seems like it was stuck, i was 500miles away from home so as a last resort i pulled it down with all the strength i had(fyi im a guy) and it fixed it lol; it is up to you if you want to try this since it might break the stick. I havent had it stuck again since, i makes a light click when its taken out of park now thought..hope this helps

Aug 08, 2011 | 2005 Chrysler 300

1 Answer

My 2005 Chrysler 300C is stuck in the park position even when the car is started and I put my foot on the break.


look under the car at the gear box for the gear leaver to see if its moving when you try to get another gear,,if it dont move there is a fault in the gear selector not the gear box,,,

Jul 04, 2010 | 2005 Chrysler 300

1 Answer

MY 2005 CRYSLER 300 WILL NOT GO IN GEAR, iT IS AS


there is a sensor on the brake pedal that controls the lock on the gear shift if its failed you wont be able to shift from park to reverse ect .
if that doesnt work check you havent lost your gear oil but a would have thought you would hear the gears grinding in this case .hope this helps

Jun 13, 2010 | 2005 Chrysler 300

1 Answer

2005 chrysler stuck in park


remove the rubber cover on the right side of the shifter. there is a pink tab press it down with a long screw driver if it still down not come out of park replace the shifter the interlock spring is broken. Hope this helps please rate if it does.

Aug 30, 2009 | 2005 Chrysler 300

2 Answers

2005 Chrysler 300C, wont change gears from park...


if it is on an incline even a very slight on it will sometimes cause this you'll have push the car the opposite way to relieve pressure

Jul 08, 2009 | 2005 Chrysler 300

Not finding what you are looking for?
2005 Chrysler 300 Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...