Question about 1996 Geo Tracker 2 Door

1 Answer

BRAKE SYSTEM Brake light on ,master cylinder empty,leak in part just in front of passenger rear tire. Need to know name of part and approximate cost to fix. Son-in-law replaced front brakes in June. Vehicle has 84,000 miles.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Hi, the light is on because of the leak in your brakes,the part that need to be replaced is call wheel cilinder ,just ask for it by the car year and model ,it should not be to expensive ,(twenty to fourty $) be sure you have the brakes bleed afther installig it.GoodLuck

Posted on Aug 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear passenger brake dosen't work


Are there two brake fluid reservoirs? And are both full? This would be a split-diagonal brake system-front driver and rear passenger are one brake system. Front passenger and rear driver are the other system. You have the one system working-the front passenger and rear driver side works. You will have to keep bleeding the rear passenger side and the front driver side-always start farthest from the master cylinder, but if that wheel just won't bleed air out, make sure the driver front is working and bleeds good. If all else fails, there are pressure bleeder kits available, I don't know the cost, but they work great. They are also a one man bleeding job, as I understand.

Dec 10, 2013 | 2000 Chrysler Concorde

1 Answer

1991 buick park avenue brake problem had busted brake line on drivers side rear brake so i fixed it then bleed the brakes.aint getting no brake fluid comming out of the passenger side rear so took of the...


Hi Chris, The brake system is basically very simple. If you have duel braking on your vehicle, the usual method is having two brakes operate on the front with for example the left rear and the other system will also operate two front and the right rear. This type of system will have two calipers on each of the front wheels. The tandem system works in a slightly different way, having the forward part of the cylinder pressurizing the rear brakes and the rear part of the cylinder pressurizing the front. I think under the circumstances you are describing, I would have a friend sit inside and pump the brakes repeatedly until the system becomes pressurized (maybe twenty thirty times of pumping the brake pedal) and then ask him or her to keep it pushed firmly down until you find out where its leaking. The amount of brake fluid you report having been sed would indecate a severe leakage. Check the lower parts of the rear wheels for signs of leaking wheel cylinders and then dito for the front wheels. Any signs of wetness at these areas and along the brake system (the plumbing or pipe work) will indicate where the leakage is. If you cannot identify a wheel which is leaking, carefully inspect around and blow the master cylinder and if this no sign go along the fluid lines, taking special note of where the damaged pipe was repaired. If there is a blockage in the line, air may be trapped at that point causing difficulty in pressurizing. Once the place of leakage has been identified it must be attended to before bleeding the system. When bleeding, begin with the wheel furthest from the master cylinder, and work your way back to the master cylinder one wheel at a time, until you reach the closest.Keep in mind that you may find it required to pump the pedal many many times before opening the bleed nipple.Regards John

Oct 29, 2011 | 1991 Buick Park Avenue

2 Answers

My brake pedal goes all the way to the floor there is no any brake oil leak i replace the brake master cylinder i bleed the system but still the same what is the correct procedure to bleed brake system...


fill master cylinder, start at right rear. the way I do it is make sure cap is back on master cylinder. pump the brakes a few times then hold them. have another person open the bleeder valve at the tires until brakes go to floor. hold them down until bleeder is retightened but be sure master cylinder is not out of fluid. then go to left rear and do the same procedure, then right front, then left front. check fluid and if air is all out there should be brakes. good-day ! THIS IS HOW I HAVE ALWAYS DONE IT ! heres a little trick of sorts. you can change a master cylinder, and if you bench bleed it first. and no fluid is lost from the master cylinder lines you do not need to bleed the whole system. but make sure cylinder is full of fluid before putting on vehicle and all air is out of master cylinder.

Oct 23, 2011 | 1997 Ford Expedition

1 Answer

How can i check out the master cylinder ? i have very little petal , only left front is catching.


Your master cylinder in front and rear. Drive your car to an empty lot to a bare spot and push hard on the brakes. Look for brake fluid starting to drip on the ground. Also look on the back side of your tires to look for brake fluid tracking due to a a slow leak.

Jun 14, 2011 | 1997 Ford Taurus

2 Answers

I am having issues with my 1997 Chevrolet Blazer. My brake light is coming on and its losing brake fluid. How can I fix this problem?


first thing have some one push the brake for you. every time thay push. look very close at each tire to see if you see brake fluid then look from passenger side looking at the driver side frame if you find no leaks any ware all ales its the master cylinder

Apr 24, 2011 | 1997 Chevrolet Blazer

2 Answers

The brake cylinder in the right rear tire started leaking. I changed it and bled the brakes., now they won't stop and will go all the way to the floor. where and how do I adjust them? THANK YOU jOE!


You may need to further bleed the brakes. Something pumping to bleed the brakes can **** in air at the brake fluid reservoir. Try using a vacuum pump to **** out brake fluid from the release screw at the brake side. Make sure you always have enough fluid at the reservoir.

Feb 28, 2011 | Chevrolet Caprice Cars & Trucks

3 Answers

Brakes are going to the floor most of the way checked rear brakes and they are still good bleed them and problem still there


Normally when the brake pedal goes almos to the floor it is an indication of low brake fluid. Low brake fluid is an indication that front and/or rear brakes are wearing. As the brake pads wear down more brake fluid will be required in the wheel cylinders or calipers. Hint, the front brakes usually wear much faster than the rear due to the fact that the fronts due a much greater braking function that the rear. Check the front pads. Don't let them get down to the metal scraping metal stage before you change them out. This causes unnessary damage to the rotors. Look at your master cylinder on the firewall under the hood in front of the steering wheel. If the fluid level is belowhte "max" mark add fluid. Low fliud should also show as a red "brake" light on your dash, but not always.

Sep 08, 2010 | 1994 Honda Civic

2 Answers

Brake pedal goes to the floor


possible leak in brake system. if not then you have a bad master cylinder. have to replace it.

Aug 30, 2010 | GMC K2500 Cars & Trucks

4 Answers

My brake light comes on and fluid spray out from underneath on passenger side


This sounds like a leaking caliper or brake line. More like a hole in the brake line if it's spraying out -- this is often caused by a brake line rubbing against the chassis. Needs a thorough visual inspection to determine where the brake fluid is originating.

Charlie

Aug 25, 2009 | 1996 Jeep Cherokee Sport

Not finding what you are looking for?
1996 Geo Tracker 2 Door Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...