Question about 2000 Ford Focus

1 Answer

2000 ford focus

VERY ROUGH IDLE ,PUT IT IN GEAR AND IT WANTS TO DIE . HAS CODES OF P1400 AND P1401. IF YOU CAN IT ROLLING ITS VERY BOGGY TO GET UP TO SPEED.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 120 Answers

Good day;
This is a hard one with out looking at the vehicle, but I give it a try. The two codes you have are for deferential pressure electronic low voltage and high voltage. First thing that I would do is check your connection on your MAF sensor, mass air flow located left side of eng compartment behind battery. Then I would check if the sensor is working proper. Please let me know if this works. I will be thinking about this one to see if there is something else.

Cheers

Posted on Aug 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 FORD FOCUS STARTS AND RUNS FINE BUT WHEN PUT INTO GEAR DIES IMMEDIATELY.


You may need a new idle sensor. Also check fuel filter and spark.

Aug 09, 2010 | Ford Focus Cars & Trucks

2 Answers

Hi. i own a 2000 ford focus n at everystop sign or red light it stalls n feels like its going to die.what would be the problem?


front of engine right side top behind manifold check the rubber breather hoses they split and perish and cause symptoms like yours

Apr 19, 2010 | 2000 Ford Focus

2 Answers

My 2000 Ford Focus is still with a rough idling


Here are the things I would check.
-timing belt/pulley alignment -plug wires -coil(s) -clean throttle body

Feb 23, 2010 | 2000 Ford Focus

2 Answers

P1401 "exhaust gas circulation test". The vehicle starts up normal and idles/runs great for about 10 min. in the morning, then runs very rough and will die on idle. It will only do this in the morning, it...


egr no try a dpfe sensor ford has a lot of this problem it has to hoses coming off the ehxhaust to a sensor that has a plug on it buy one then look for yours dont cry when you see the part it is small an costs about 85 dollars this may not be the problem but 90% of the ones that have p1401 are this problem oh yea check the hoses also dont forget replace the part then disconect the battery to reset the code /turn the check engine light off

Jan 11, 2010 | 2000 Ford Expedition

1 Answer

Focus 1.4 zetec idle tickover is about 2000rpm


sensor problem,without the right equipment it will be cheaper to put it in the dealers

Jul 09, 2009 | 2000 Ford Focus

2 Answers

2000 f-250 running rough, overdrive light flashing


Get the codes that were saved when the "engine light" came on and post them here. (You can get them retrieved for free from Auto Zone).

I'm going to take real *wild* guess that somehow that rough spot you hit actually impacted the oxygen sensor and disconnected it or damaged it.

May 03, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

2000 Focus Zetec-rough idle, very rough under load.


you haven't said if its petrol or diesel so i'm assuming its petrol since your smelling sulfur sounds if you have a misfire causes could be plugs,leads or ign coil i suspect its ign coil these are common to go.

Mar 25, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...