Question about 1978 Ford Granada

1 Answer

Ford falcon head lights will not work on dipp but will work on full beam checked lihgts and fuses

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 173 Answers

Check dimmer switch itself or connections

Posted on Nov 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Full beam dusont work on me ford sierra


Check globes,check if power is going to lights with a test light if not it sounds like high/low beam switch faulty ,try spraying it with W D 40.

Sep 30, 2015 | 1989 Ford Sierra

1 Answer

2008 Ford F250 low beams are not working but High


check ground going to the frame of the car also check bright light switch also check your head light relay

Oct 05, 2014 | Cars & Trucks

1 Answer

Headlights wont work on 1998 mustang v6 Running lights brake lights and gauge lights work fine. The lights only trn on when i hold the high beam switch. Any suggestions?


check fuses and check globes . Globes might have two filaments and low beam ones has blown . Had this globe thing happen on two globes at the same time on Ford Falcon's Halogon globe headlights.

May 05, 2014 | Cars & Trucks

3 Answers

I have a 2006 ford escape and the passenger head light low beam will not work. Tried replacing the bulb, and check fuses nothing is working.. what else can I try?


Both your low beam and your high beam is protected by the same fuse, so it makes sense that the fuse is OK if the high beam is working on the passenger side. There are 3 fuses for the headlamps. Fuse #13 in the Battery Junction Box (20 Amp). If this fuse is blown, the headlamp relay will not have any power and neither high nor low beam on either side will work (you will have no headlamps at all) Then there is Fuses #2 and #3 (15 Amp) in the Battery Junction Box. #2 goes to the left low and high beam and #3 goes to the right low and high beam.
The headlamp switch uses a SINGLE CIRCUIT to control BOTH sides at the same time, so if one side works, the switch cannot be the problem. The headlamp relay provides power for fuses #2 and #3 and we already ascertained that these fuses must have power since we have working lights on both sides, so the relay cannot be the problem. A replacement bulb has already been tried, so that pretty much leaves us with a bad lamp socket. (Most likely cause) or a bad connection at splice #S122, which is located in the main wiring harness near the breakout for the left headlamp. (RED/BLACK wire)

May 16, 2011 | 2003 Ford Escape

1 Answer

Hi-lo beam headights, healdlights only work in one


have you checked the fuse? if fuse is good and still have the same problem your next step would be to have the headlamp switch checked.

Aug 05, 2009 | 2006 Ford F-150

1 Answer

I have no low beam


it could be in the switch

Feb 07, 2009 | Ford Futura Cars & Trucks

1 Answer

Turn head lights on every light works except low beams


thare is a high beam relay and a low beam relay in the fuse box find the low beam relay and replace it. if this dont work its probabley the switch

Dec 31, 2008 | 2003 Ford Taurus

1 Answer

High beam


check the fuses under the hood these headlamps are seperatly fused,
later
paul

Oct 14, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...