Question about Ford F-150

1 Answer

I HAVE A 1991 CHEVY PICKUP. I HAVE BOUGHT A NEW IDLE SENSOR. MAP SENSOR, AND THROTTLE SENSOR. WHEN I PUT THE MAP SENSOR ON THE TRUCK DIES.

Posted by on

  • Anonymous Mar 17, 2014

    how do I replace the map sensor in 1991 Toyota truck

  • Anonymous Mar 27, 2014

    starts fine but dies when put in drive

×

1 Answer

The idle sencor hASSS TO BE RUN FOR A WHILE,ALSO YOU WILL HAVE TO RESET YOUR COMPUTOR BY DISCONECTING THE GROUND CABLE TO THE BATTERY

Posted on Aug 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Truck not idling and cutting off


Now clean MAF , install new TPS , Clean injectors .

Jan 23, 2013 | 1991 Chevrolet C1500

1 Answer

1991 chevy c1500 stalling


Usually a problem with a dirty throttle body or a faulty idle air control valve. The computer controls idle speed by regulating how much air enters the intake thru the valve.

Oct 13, 2012 | 1991 Chevrolet C1500

1 Answer

Problems with my 94 k1500 / changed idle control valv / map sensor / throttle control sensor /plugs,wires,cap,rotor ,and fuel filter / these are all the things i have bought but nothing i have done will...


it might be the ECU, when cold the computer raises the iddle to warm it up, when reaches temp., it dropes it down to normal iddle, but it might not know where the correct iddle is, it might be another sensor like a cam, map, throttle position senssor.

Dec 05, 2010 | 1994 GMC Sierra

1 Answer

When my 92 pickup warms up it will not idle and dies.Tried adjusting the idle screw, still dies. 22RE 2.4L. I have installed new plugs and wires.


check for broken or leaking vacumn hoses as well as leaking intake gasket and base gasket for the carb/throttle body

Jan 22, 2010 | 1991 Toyota Pickup

2 Answers

1991 toyota pickup dies when you release the gas pedal


There are couple of things I would check out that would cause this problem.

1. The Mass Air Flow Sensor. It measures how much air is going into the engine. Should be located on top of air filter box.

2. The air tube that goes from the Mass Air Flow Sensor to the throttle body. Check for leaks that would bypass air from going through the Mass Air Flow Sensor.

3. The Throttle Position Sensor. Located on the throttle body. This tells the computer what position the butterfly plate is on the throttle body. You control this plate with the gas pedal..

Oct 11, 2009 | 1991 Toyota Pickup

1 Answer

How do you raise the idle? chevy pickup with 4.3 engine. 1991


its computer controlled. If its doesnt idle at the correct speed, theres a problem have it checked, could be a tps( throttle position sensor) or iac (Idle air control) problem

Oct 04, 2009 | Chevrolet C1500 Cars & Trucks

2 Answers

1991 Toyota 4x4 22re .On cold start the idle


Take car for trouble code at Autozone or similar store for free. it is probably the idle position sensor.(IPS)

Feb 19, 2009 | 1991 Toyota Pickup

2 Answers

I have a 88 chevy pickup 1500 with a 4.3 liter engine. I have high idle problem. I would do it once in a while and quit. Now it up and wont idle down. I have new throttle position sensor, map sensor. all...


is the check engine light on ? if it idling high chances are you have a vacuum leak take a can of carb cleaner and spray the egr valve and if the engine rpm changes replace egr valve the throttle body may also be plugged pull the vacuum line off the map sensor start vehicle and see if you have vacuum if not remove throttl body and clean vacuum passage hope this helps

Oct 05, 2008 | 1999 Chevrolet K1500

3 Answers

Jeep stalls



I had the same problem... frustrating.

I picked up a repair manual at the parts store. I took off the throttle body and cleaned it with throttle body cleaner spray. I changed the Idle Air Control Valve (idle speed motor) which was very clogged. While I had the throttle body off I also changed the Map Sensor and Throttle Position Sensor. The manual will walk you through the steps. I had never done anything like this before. If I can do you so can you.
My Jeep has never run better. Good Luck

Sep 26, 2008 | 1991 Jeep Comanche

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...