Question about 2000 Volkswagen Beetle

1 Answer

Nebettleed to change serpintine belt on a 2000 voltswagen

Need to change serpintine belt on 2000 voltswagen bettle

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

The easiest solution I can say would be to go to parts america or Advance Auto Parts during a non peak time and ask for help. These belts should be a 5 minute replacement and most store employees will enjoy offering you the free service just to get out of the store for a few minutes. SOME stores are more willing to help than others.

(If you over tighten the belt you will have problems and if you under tighten the belt you will have squeals. If you still wish to do this yourself just make sure the belt is tight enough that it only turns 90 degrees in the middle to the left of right when tightened.)

Posted on Aug 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant put serpintine belt on


You don't take anything off

You just put a long 1/2" ratchet in the hole on
the tensioner & Pull against the spring tension until
you have the belt over the final pulley

Oct 12, 2012 | 2000 Buick LeSabre

1 Answer

Need a serpintine belt diagram for 2000 dodge durango 8cyl 5.9 l


all diagrams can be found by googling the manuafacturer for that particular serpintine diagram...I did it for my 2000 monte carlo

Dec 15, 2011 | Cadillac Cars & Trucks

2 Answers

I have a 2000 Ford Focus and a friend of mine told me that the serpentine belt has to be changed around 75000-85000 miles as scheduled maintenance. Should I go get my belt changed?


It is never a bad idea to change your serpintine belt as it runs all of the accesories under the hood. Yes I would change it. It is cheap insurance against problems you may have down the road.

May 12, 2011 | 2000 Ford Focus

1 Answer

Buying used 1998 vw bettle 71564 miles orig owner auto a/c . What should I look for as far as any problems . Timing belt change ? .Please tell me. ...


first thing is the timing belt and water pump and thermostat. This job can be expensive but if not done will be catastrophic if belt breaks the next things will be : accessory belt , fuel filter, cabin filter, tentioners , battery ,cables , axles , sway bar bushings , control arm bushings , air conditioning system

Jan 22, 2011 | 2000 Volkswagen Beetle

1 Answer

2000 Mazda 626


change the belt for a new one,and clean the pulleys before fitting.

May 19, 2010 | 2000 Mazda 626

1 Answer

2000 town & country van. serpintine belt slips off. turn corners in slush and away it goes.


Sounds like the belt is worn out or the tenchiner pully is worn out so replace the belt and if it still does it then you will have to change the pully, but most of the time when this happens it is the belt so replace the belt and you should be good to go.

Mar 03, 2010 | 2000 Chrysler Town & Country

1 Answer

Need the diagram for a serpintine belt on a 2000


There are 2 possible engines for your Windstar, the 3.0L and the 3.8L. Below are both diagrams. Best of luck on your repair!
Greg

3.0L
6ace2c8.jpg





3.8L
186c6d0.jpg

Nov 11, 2009 | 2000 Ford Windstar

1 Answer

How do change serpintine belt ford 2003 f 250 6.0


changing a serpentine beltUsually, A serpentine belt system has a spring-loaded idler. Using the proper wrench, usually an 18mm, one can relieve the tension on the belt, making it relatively easy to change the belt. On most vehicles you will find a sticker either on the underside of the hood or somewhere in the engine compartment that shows how the belt goes on.

Sep 25, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Alternator belt


you have to rent the serpintine belt removal tool from autozone, when you get that ask for a belt routing diagram..... it will show you how to do it.

Nov 25, 2008 | 2003 Nissan Altima

Not finding what you are looking for?
2000 Volkswagen Beetle Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...