Question about 2002 Isuzu Axiom

1 Answer

SHOCK ABSORBER LIGHT

Shock absorber light stays on while driving

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The shocks are electronic and very expensive. Changed mine last year, the fronts were $87.00 each and thr rear $125.00 each. They could only be purchased from the dealer. Haven't seen any online. They have a connection at the top that monitors the pressure or something.

Posted on Aug 20, 2008

3 Suggested Answers

  • 1861 Answers

SOURCE: After working on some of the shock absorber, the

When the strut was removed, the wire from the harness to the wheel speed sensor was not removed, and it was broken. An easy omission, for those without knowledge of the existance of wire.

It costs about $192.00 to replace the sensor..

Posted on Oct 16, 2009

Testimonial: "One of the sensor was found broken perharps in the proces of removing it for cleaning. This happen to be attached to the strut that was not removed."

  • 14 Answers

SOURCE: the shock absorber workshop warning light is on

HAS to be done with a diagnostic kit

Posted on Jun 18, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What othernshocks will fit on a 2002 chevy avalanch 2 wheel drive?


These, and they must be for right model

2002 Chevrolet Avalanche 1500 Shock Absorber

  • 02 2002 Chevrolet Avalanche 1500 Shock Absorber ... www.partsgeek.com/catalog/2002/chevrolet/avalanche_1500/suspension/...
    • 4.8/5
    • 52 REVIEWS
    Buy a 2002 Chevrolet Avalanche 1500 Shock Absorber at discount prices. Choose top quality brands AC Delco, Arnott, Bilstein, Fox Shox, KYB, Monroe, OSC Automotive ...
  • 02 2002 Chevrolet Avalanche 2500 Shock Absorber ... www.partsgeek.com/.../2002/chevrolet/avalanche.../shock_absorber.html
    • 5/5
    • 45 REVIEWS
    Buy a 2002 Chevrolet Avalanche 2500 Shock Absorber at discount prices. ... Comes in three forms of Monotube Shock Absorbers, ... • 2002 Chevrolet Avalanche 2500: ...
  • Related searches for 2002 chevy avalanche shock absorbers
  • 2002 Chevy Avalanche Performance Shocks & Struts - CARiD www.carid.com > ... > Performance Shocks & Struts > Chevy > Avalanche Chevy Avalanche 2002, 4600 Series Standard 46mm Monotube Shock Absorber for Stock Height Vehicles by Bilstein®, 1 per Pack. Finish: Yellow Paint.
  • 2002 Chevrolet Avalanche 2500 Shock Absorber and Strut ... www.autopartswarehouse.com > ... > Shock Absorber and Strut Assembly We have the Largest Selection of Shock Absorber and Strut Assembly for your 2002 Chevrolet Avalanche 2500. Get yours at Wholesale Prices here at AutoPartsWarehouse!
  • 2002 Chevrolet Avalanche 1500 Shock Absorber and Strut ... www.autopartswarehouse.com > ... > Shock Absorber and Strut Assembly We have the Largest Selection of Shock Absorber and Strut ... Shock Absorber and Strut Assembly 2002. Shock Absorber and Strut Assembly for 2002 Chevrolet Avalanche ...
  • 2002 Chevy Avalanche Performance Suspension ' Shocks ... www.carid.com > ... > Suspension Systems > Chevy > Avalanche Bilstein 4600 Series Shock Absorbers and Struts are designed ... Chevy Avalanche 2002, ES Series Shock Absorber by ... 2002 Chevy Avalanche Performance Suspension ...
  • 2002 Chevrolet Avalanche 1500 Shocks & Struts - JCWhitney www.jcwhitney.com > Suspension & Chassis Looking for Shocks & Struts for your 2002 Chevrolet Avalanche 1500? ... 2002 Chevrolet Avalanche 1500 Shocks & Struts ... MONOMAX SHOCK ABSORBERS ...
  • 2002 avalanche shocks ' eBay www.ebay.com > Search > 2002 avalanche shocks Find great deals on eBay for 2002 avalanche shocks 2002 ... Ultima Strut Shock Absorber Full Set Chevy Surburban ... KYB Gas-A-Just Shock Absorbers (Fits: 2002 ...
  • Chevy Avalanche Struts - Best Shock Absorbers & Coilover ... www.autoanything.com/suspension-systems/Chevy/Avalanche/... ... Reviewed for a 2002 Chevy Avalanche -4/26/2016 10:06 PM. After researching various brands of shock, ... Chevy Avalanche Shocks & Struts are Available for ...
  • Jun 10, 2016 | Cars & Trucks

    1 Answer

    Shock absorber for nissan presage2003


    As far as I can tell, you cannot.
    Nissan and the other auto makers stopped using front shock absorbers on their cars about 30 years ago.
    Now they use a combination shock and spring holder, etc. called a "strut".
    Into your computer type "Presage" and do some serious looking,
    You might be able to order parts for them from somewhere like Japan, China, or some such country in the far east.
    Honestly, the cars imported by Nissan into this country almost never need front struts, even as old as yours.
    However, repair garages still tell people they need them, because the repair garages need to make money to stay in business.

    Jan 21, 2013 | Cars & Trucks

    1 Answer

    Dear Sir, How do you change an 87 mitsubishi mighty max front shocks without any compression equipment? Please email me at brad8141@hotmail.com. Is there a book with instructions regarding this...


    REMOVAL & INSTALLATION
    1. Support the vehicle safely on jackstands. Support it at a height which will allow sufficient room to reach the upper shock absorber mount.
    2. Remove the wheel.
    3. Remove the upper shock nut, washer and bushing.
    4. Remove the lower mounting bolt(s) and remove the shock from the vehicle.
    5. Install the shock absorber in the vehicle and loosely tighten the upper shock absorber nut. Make sure the install the bushings and washers before installing the upper nut.
    6. For 4WD vehicles, install the shock absorber so that the white paint mark at the lower side of the shock absorber faces the outer side of the vehicle. Install the lower shock absorber bolt(s). On 1992-95 Montero torsion bar suspensions, tighten the single lower mounting bolt and nut to 65-76 ft. lbs. (88-103 Nm). On all other vehicles (whether torsion bar or coil spring suspensions), the two lower shock absorber mounting bolts should be tightened only to 7-10 ft. lbs. (9-14 Nm). Fig. 1: Install the shock absorber so that the white mark faces toward the outside of the vehicle - 4WD vehicles, except 1992-95 Monteros 86668006.gif
      Fig. 2: Install the bushings, washers and nuts in the order shown - except 1992-95 Monteros 86668007.gif

    7. On 1992-95 Monteros, tighten the shock absorber installation nut so that the dimensions shown in the illustration ( A and B) are at the standard values. These standard values are: A - 0.04-0.08 in. (1-2mm), B - 0.06-0.10 in. (1.5-2.5mm). WARNING
      When tightening the nut, be careful not to bend the stud pin of the washer assembly.
    8. On all other vehicles, once the lower mounting bolt(s) are tightened, tighten the upper shock absorber mounting nut all the way to the end of the thread on the shock absorber stud, then tighten the locking nut to 9-13 ft. lbs. (12-18 Nm).
    9. Install the wheel.
    10. Lower the vehicle to the ground. Fig. 3: When installing the upper shock nuts on 1992-95 Monteros, make sure measurement A is 0.04-0.08 in. (1-2mm) 86668008.gif
      Fig. 4: When installing the upper shock assembly, make sure its components are positioned as shown - 1992-95 Monteros 86668009.gif
    prev.gif next.gif

    Nov 03, 2010 | 1987 Mitsubishi Mighty Max

    1 Answer

    Need new struts on rear, Would like to replace with air shocks. Any suggestions on how I would do this?


    Shock Absorber -The rear already has air shocks on the 1999 Cadillac Deville: REMOVAL & INSTALLATION Rear
    1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
    2. Remove or disconnect the following:
      • Rear wheel Fig. 1: Exploded view of the rear shock absorber mounting 9300vg06.gif

      • Negative battery cable
      • Shock absorber electrical connector from the rear suspension support, If equipped
    3. Support the lower control arm with a jack to relieve the tension on the shock absorber.
    4. Remove or disconnect the following:
      • Lower shock absorber mounting bolt and nut
      • Upper mounting nut, retainer, and insulator
      • Shock absorber compress by hand and remove through the upper control arm
      To install:
    5. Position the top of the shock absorber with the insulator attached into the suspension support.
    6. Install or connect the following:
      • Upper shock insulator, retainer and nut. Torque the nut to 55 ft. lbs. (74 Nm).
      • Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm).
      • Shock absorber electrical connector to the rear suspension support, if equipped
      • Rear wheel
      • Negative battery cable
    prev.gif next.gif

    Jul 29, 2010 | 1999 Cadillac DeVille

    2 Answers

    What is service ride control


    Service Ride Control means one or some of your shocks or struts are worn and may need replacing. The price for new ones is not cheap,

    Jul 13, 2010 | 2006 Cadillac Escalade

    1 Answer

    On the 2000 jaguar s-type, what is, Cats system


    Cats was a optional extra from the factory. It is adaptive damping. It basicialy softens or stiffens the shock absorbers to your driving style.

    It may seem that one of your shock absorbers has developed a internal pressure fault. A local garage with a code reader can tell you wich shock absorber to check. Would be worth checking the electrical connectors that plug into the top of the shock absorber to make sure they are not damaged.

    Look's like you may need a new shock absorber

    Jan 06, 2010 | 2000 Jaguar S-Type

    1 Answer

    How to replace front shock bsorbers


    This is for the 2WD model:

    2-Wheel Drive
    1. Raise and support the front of the vehicle safely using jack stands.
    2. Using an open end wrench, hold the shock absorber upper stem to prevent it from turning, then remove the upper stem retaining nut, the retainer and rubber grommet.
    c16056c.gif
    Common front shock absorber mounting-2WD vehicles

    1. Remove the shock absorber-to-lower control arm retaining bolts and lower the shock absorber assembly from the bottom of the control arm.
    2. Inspect and test the shock absorber; replace it, if necessary.
    To install:
    1. Fully extend the shock absorber stem, then push it up through the lower control arm and spring so that the upper stem passes through the mounting hole in the upper control arm frame bracket.
    2. Install the upper shock absorber nut and tighten to 100 inch. lbs. (11 Nm) on 1994 models 145 inch lbs. (16 Nm) on 1995 models, 54 ft. lbs. (73 Nm) on 1996 models, or 106 inch lbs. (12 Nm) on 1997-99 models while holding the stem with an open end wrench. Be careful not to crush the rubber bushing.
    3. Install the shock absorber-to-lower control arm retaining bolts and tighten to 20 ft. lbs. (27 Nm) on 1994-95 models and 54 ft. lbs. (73 Nm) on 1996 models, or 22 ft. lbs. (30 Nm) on 1997-99 models.
    4. Remove the jack stands and carefully lower the vehicle.

    Nov 01, 2009 | 1998 Chevrolet S-10 Pickup

    1 Answer

    Does a 1999 chrysler 300M use shock absorbers or struts?


    if front wheel drive its struts
    if rear wheel drive its shocks
    this is how you tell them apart

    Dec 06, 2008 | 2000 Chrysler 300M

    Not finding what you are looking for?
    2002 Isuzu Axiom Logo

    Related Topics:

    434 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Isuzu Experts

    yadayada
    yadayada

    Level 3 Expert

    63242 Answers

    Steve Hurc
    Steve Hurc

    Level 3 Expert

    450 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21981 Answers

    Are you an Isuzu Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...