Question about 2006 Chrysler Town & Country

2 Answers

Power locks on rear doors

I have replaced the IOD fuse and checked all others. All are fine.

Posted by on

  • tlbro11 Aug 16, 2008

    I have replaced the IOD fuse and checked all others. All are fine.

  • tlbro11 Aug 17, 2008

    Yes, the the switch is fine.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. It turns out to be the motor in the actuator. It gets activated but has not enough power to unlock or lock it. Now I am trying to find a new motor, that is not easy

Posted on Nov 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

Did you check the switch itself if they're making contact

Posted on Aug 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 chrysler sebring radio and door locks stopped working after i needed a boost


Tanya, May be the IOD fuse, The IOD fuse feeds the memory and sleep mode functions for some of the electronic modules.
Found this in a Sebring forum, There is a black case in the middle of the upper part that contain fuse #5 red 10amp you need to replace this fuse by another on and after that every thing will work again. Open your driver's door and open the fuse box on the left, there's a handle near the door hinge. This is most likely a blown fuse - check the fuse box lid for thediagram. Find out which one is blown and swap it out.
Radio died remote system not working door locks will not work

found this helpful answer from chrysler mechanic on JustAnswer com

door locks will not work

Quick Tip Signs of blown IOD Fuse on Chrysler Dodge Jeep Fiat or Ram...

Mar 09, 2016 | Chrysler Cars & Trucks

2 Answers

2005 Grand Caravan power door lock quit working. Side doors and rear cargo doors still open with keyless remote. Door lock "honks" when button pushed, but locks will not automatically...


This is a common issue with the 2005 Caravan. To fix the issue you can disconnecting your battery or disconnect the IOD fuse for 10 - 30 seconds in the fuse box located in the engine compartment. This is not a permant fix. Inorder to get this fixed permantly you need to take it to a dealer so they can update your computer.

Dec 15, 2010 | 2005 Dodge Grand Caravan

1 Answer

Power sliding door will not open at all manually with remote or with door locks tried to remove iod fuse and sliding door fuse but still dont open thanks


either something jammed in track/lock-- or actuator rod broke or disconnected from lock --need to remove interior door panel to get to lock release and latch check all rods and clips for damage or missing repair or replace as necessary u can manually unlock the door at latch if something was jammed or stuck in latch

Nov 26, 2009 | 2007 Dodge Caravan SXT Minivan New Cars

2 Answers

The power door locks are not functioning, either with the remote, or pressing the lock switch on the door panel. any clues??


First try pulling and re-inserting or replacing the IOD fuse. You can find it on the lower right side of the fuse box under the hood. If that doesn't work you have a short and need to see a mechanic.

Nov 08, 2009 | 2005 Chrysler Town & Country

1 Answer

Power door locks do not work


2004-2005 CARAVANS HAD A SOFTWARE ISSUE IN THE BODY CONTROLLER..REMOVING AND REINSTALLING IOD FUSE IN UNDERHOOD FUSEBLOCK..THERE IS A SOFTWARE UPDATE FOR THE BODY CONTROLLER FROM CHRYSLER..TAKES ABOUT AN HOUR TO COMPLETE..AS FAR AS I KNOW,THEY ARE ONLY ONES WHO CAN DO THIS

Sep 23, 2009 | 2005 Dodge Grand Caravan

1 Answer

Below the odometer it indicates no fuse,


The IOD fuse is missing or burnt out. IOD is "ignition off draw" which serves as the dome lights, radio memory, locks and other things powered with the key off.

Jul 30, 2009 | 2002 Chrysler PT Cruiser

3 Answers

Power door lock do not work. So far I have


2005 caravan's had software issue with power door lock operation..the body controller may need a software update..check with local dodge dealer to see if service bulletin applies to your vehicle..have seen body controller problems as well

Jun 18, 2009 | 2005 Dodge Grand Caravan

2 Answers

2000 Ford Focus electric locks/acuator failure recurring problem


I would follow their recommendation as I had the same problem with my car. They unhooked the power to that door and it was fine. The problem was a short in the wiring in the door that was causing the problem. So maybe get them to check the wiring in the door as well.

May 20, 2009 | 2000 Ford Focus

1 Answer

Power windows, locks, and seat not working


That Clicking should be a Bad Relay Switch. See if you can Locate it and Replace it. It should fix this Problem for ya! Please Rate My Response! Thanks!

Jan 31, 2009 | 2005 Jeep Grand Cherokee

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...