Question about 1995 Mercury Grand Marquis

1 Answer

I need to repair the linkage between the key lock and the ignition switch of a 1995 Mercury Grand Marquis. The key turns but does not move the switch.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 165 Answers

I believe what your talking is called an accuating rod if not broken bend back into aliengment if you can if not get new one from dealer or junkyard

Posted on May 30, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Key will not turn in passenger side door lock, 1995 Grand Marquis

when dealing with locks the specialist to seek advice from is a locksmith not a mechanic
yes it probably will fit and if you use the services of a locksmith ( who can provide the barrel and have it set to the existing key

Jul 31, 2015 | 1995 Mercury Grand Marquis

4 Answers

Ignition key won t turn

The ignition key won't turn likely because the shifter linkage that locks the key in OFF is worn or loose. Move the shifter linkage hard to the Park position and the key will turn. Have the linkage adjusted and the worn parts replaced

Mar 30, 2014 | 2000 Mercury Grand Marquis

1 Answer

My 1995 grand marquis will not crank at all

first of all check to make sure the engine is not locked up but placing a socket wrench on the crank shaft bolt. Try to turn it clockwise, if you can not bug it, its locked up. Second do you hear a click from the starter when you turn the ignition key, Not a click from the ign. switch. If you hear a clicking nose from the starter solenoid then more than likely you need a new starter.

Jul 22, 2012 | 1995 Mercury Grand Marquis

1 Answer

I have a 2005 grand marquis the wipers blades come on themself while driving the swicth is off

disconnect battery first, then with the key in the ignition, using a paper clip or something the same size put it in tiny hole on bottom of switch pushing up and turn key counter clockwise should allow the ignition lock cylinder to come out.

Apr 24, 2011 | 2005 Mercury Grand Marquis

1 Answer

Need to remove the ignition lock cylinder to replace it cause the key is lost

turn the ignition to the on position then on the bottom of the steering colum just under the lock cylender thare is a hole that leads up to the cylender. get a straight pick or somthing with a point on it and insert in hole apply a little steady force while pulling straight out on the cylender. i am assuming you are talking about the ignition lock cylender.

Apr 20, 2009 | 1995 Mercury Grand Marquis

1 Answer


You need a new ignition lock cylinder installed, common problem on your model.

Aug 03, 2008 | 1986 Mercury Grand Marquis

Not finding what you are looking for?
1995 Mercury Grand Marquis Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

75807 Answers


Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides