Question about 2002 Kia Sedona

2 Answers


Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Kia Master
  • 2,431 Answers

Yes they are you can only have one code, one of them is a function code the others are logic you will need to determine this out P0715 Input turbine speed circuit. P0456 evap control. P0128 coolant thermostat malfunction. P0441 Evap control incorrect purge. Here is the fix to begin with the eavp codes the P04xx is recalled by Kia so let them deal with that, Have all thhe codes cleared the main code you will need to be concerned with is the transmission code, check the fluid condition and level, also make sure that you have coolant in the radiator or water and fill the radiator resovoir, (okay to over fill it)

Posted on May 29, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

P0456,and P0441 are the Evap Possible problems

  • A small leak in any of the EVAP hoses or fuel tank hoses
  • A small leak in the purge valve or vent valve
  • The EVAP Canister may be leaking

A code P0128 may mean that one or more of the following has happened:
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor
PO715 is an input speed sensor on the transmission. Usually causing problems with 3rd and sometimes 4th gear. I would check a manual to find the location of the sensor to find if you can change it yourself. This is sometimes the first sign of a Transmission going south on you

Hope this helps

Posted on May 29, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I went to an auto parts store 'cause my check engine light and vsc light came on, on my 2006 Toyota Avalon-Touring. I bought a new gas cap a couple days ago. The light is still on.

You may have a loose hose in the evap system.
see the diagram below. The evap purge valve is on top of the engine as indicated. There should be a small diameter hose connected there. That hose runs under the car all the way to the charcoal canister, which is on top of the fuel tank. Check the hose for damage. If you can, check to see if it is connected to the canister and check the canister for damage as well.


Aug 15, 2017 | Toyota Avalon Cars & Trucks

1 Answer

Whats ford windstar error codes p0715 mean

I hope this helps and is what your looking for... good luck

Ford P0715 OBD-II Trouble Code Definition:
P0715 Input Shaft Speed Sensor Circuit Malfunction
P0715 Ford OBD-II Trouble CodeDescription:
OBD Trouble Code P0715 Input/Turbine Speed Sensor "A" Circuit What does the code mean? OBD-ii Code P0715 definition:
The input speed sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Symptoms Sumptoms of OBD code P0715
- Engine Light ON (or Service Engine Soon Warning Light) - Possible shifting problems Causes Causes of the OBD-II code P0715
- Transmission speed sensor circuit is open or shorted. - Poor transmission speed sensor circuit connection - Faulty transmission speed sensor The Error code is generally activated on detection of the following conditions: Diagnostic Trouble Code (DTC) P0715 is detected when TCM or ECM does not receive the proper signal from the sensor. Solutions

Jun 22, 2014 | 1999 Ford Windstar

2 Answers

P0441 4runner check engine light

Google the Code

OBD2 Code PO441

Mar 27, 2013 | 2004 Toyota 4Runner

1 Answer

Does the check engine light come on in a 2003 grand prix if the gas cap is not on tight enough? Mine came on right after I got gas and I am hoping this is the case.

Yes, if the gas cap is not on tight enough or if you took the cap off with the engine running, this could very well be the problem. It will usually set one or more of the following fault codes: P0441, P0442, P0455, or P0456. I usually do not recommend getting the "free" scanning done at the local parts dealer, but this is one case where I would actually recommend it. Have them scan your OBD system. If one of the codes above are present, just ask them to clear the codes for you. Make sure your fuel cap is tight and see if the light comes back on (if it does, then you will need to diagnose to find out why). If there are any codes other than those listed above, then you should get your vehicle diagnosed to find the cause of the code or codes.

Please also review the following articles:
Why Is My Engine Light On?

What Else Could Be Wrong?

Sep 22, 2011 | 2003 Pontiac Grand Prix

1 Answer

Having the same problem the other guy described.

First of all, these codes are what are called "Powertrain Trouble Codes' (that's what the "P" means P=Powertrain). TCM Request (Transmission Control Module = TCM). The request was to turn on the 'Check Engine" light.
P0720 - output speed sensor circuit malfunction
P0715 - Input speed sensor (turbin speed) circuit malfunction
P0442 - Evaporative Emission System Leak (Small Leak)
P0455 - Evaporative Emission System Leak (Large Leak)
Check fuel filler cap problems - for Evap Emiss leaks
Replace the pulse generators & have the trans fluid replaced/flushed.
The Main Catalyst System Efficiency Bank 1 Is P0420, not P0442
If you had P0420 code, the catalytic converter is shot... and that's an expensive component.

Oct 06, 2009 | 2001 Hyundai Elantra

1 Answer

2001 Hyundai XG300 with an engine light (p0715/P1159)

clean up all ground wires but you may need both of those items

Jul 21, 2009 | 2001 Hyundai XG300

2 Answers

Codes 441, 446, 455 on a 2005 Camery

P0441 Evaporative Emission Control System Incorrect Purge Flow
P0446 Evaporative Emission Control System Vent Control Circuit Malfunction
P0455 Evaporative Emission Control System Leak Detected (Gross Leak)

Jun 04, 2009 | 2004 Lexus LS 430

Not finding what you are looking for?
2002 Kia Sedona Logo

1,708 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides