Question about 1993 Saturn SL2

2 Answers

1998 Saturn SL2 Chassis

I am looking for an illustration of how the front chassis or sub-fram is broken down. I have a 1998 SL2 that my son ran into the curb and it pushed the front tire back into the fender (rubbing) and I think it bent the frame. Is this a sub-fram that goes under the engine?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Keep in mind that if you drop the subframe, you will have to re align the car. 

Posted on Sep 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 61,289 Answers

The sub frame is also known the engine cradle assembly, if it is damaged get another from a wrecting yard, without allot of special equip and tools you are wasting your time trying to repair the old frame, of course I don't know how badly it is damaged so this could be incorrect.

Posted on Aug 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the cross member under the load


cross members are the chassis members that tie the side frame rails together. There will be one at the front and another at the centre of the chassis and one at the rear . There is a bolt in cross member at the rear of the gear box (rear engine mount). Most modern cars are uni-construction (that is the body is complete and the front section will have a front cross member and the sub-frame rails will be bolted under the body around the front door pillars and onto the fire wall.. IN heavy vehicles there is a front cross member the carries the front engine mount another after the gear box to carry the cabin mounts and then a member every 3-4 feet to the end of the chassis rails . Their only purpose is to tie the chassis rails together.

May 03, 2014 | 1989 Chevrolet G20

1 Answer

I need to drive to work at night and already recieved a ticket for my tail lights being out however the brake lights are out, i bought a manual and it said nothing of where the fuse was sp i checked every...


take the cover off the tail light lens and look at the bulb if there are broken filaments or burned spots there bad you can also check to see if your getting power to the plugs for the bulbs with a 12volt test light or meter.

Feb 24, 2011 | 1998 Saturn SL

1 Answer

WANT TO PUT A 1996 LS -1 SATURN, MANUAL TRANSMISSION AND MOTOR INTO A 1995 LS-2 SATURN BODY AND CHASSIS. WILL I HAVE TO CHANGE THE COMPUTER? DOES THE DESIGN CHANGE FROM 95 TO 96 EVEN MAKE IT POSSIBLE...


There isn't much difference between them. The SL series didn't change between 95 and 96 except for the ecm is OBD2 on the 96. Are both cars stick shift? The difference in the SL1 and the SL2 are the cams. 1 for sohc and 2 for dohc. So what you are asking is can I take out my dohc motor and install a sohc motor right?

Apr 24, 2010 | Saturn SL1 Cars & Trucks

1 Answer

I have a 1997 saturn sl 1'' the chassis is broken wher e the sway bar on the passenger side is attached i need to install a new front chassis will this require me to disconnect the exhaust system


G;day mate just a quick one maybe you can look at the manufacures website to see if there was a recall on this model for that problem , just a thought

Apr 04, 2010 | 1997 Saturn SL

1 Answer

1998 saturn sl2 hood will not open cable broken


if you can get you fingers through the front grill you could see if you can get to the latch to release it or try it with a long screw driver if you can see the latch and can not reach it

Mar 22, 2010 | 2003 Saturn VUE

1 Answer

Sub frame interchange


yes a subframe from 91-94 will work.

Jan 09, 2009 | 1991 Saturn SL2

1 Answer

Need the correct steps to change the alternator on a 1998 saturn SL2


1st take the positive post off when you start removing it. You will have to remove the ball joint on that side to get it off.

Oct 22, 2008 | 1993 Saturn SL2

Not finding what you are looking for?
1993 Saturn SL2 Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...