Question about 1996 Toyota Camry

1 Answer

Can the valves be adjusted on a 1996 Toyota Camry 2200 (number on the valve cover)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 5,332 Answers

Yes they can but you will need a couple of special tools. This style of valve adjustment is Called a shim an bucket. First the valve to cam clearance needs to be measured. Then if that measurement is out of spec you will need to use. Couple of special tools to compress the valve so that the shim can be removed. Once the shim is out you will need to measure it's thickness with a micrometer than figure out the correct size replacement. The replacement will need to be purchased from the dealer. These are not easy or DIY friendly. I can give you more info if you think you want to tackle it.

Posted on May 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

This 93 toyota camry ticks like the valves need adjusting but im told that thats a tough process and most camrys valves shouldnt need adjusting for the life of the car. The ticking has a little bit of a...


it my have a bad lob on the camshaft worn out....or lose bolt...good time to check things out by replacing your valve cover gasket....hope this helps you????

May 22, 2011 | Toyota Camry Cars & Trucks

1 Answer

Where do you add oil to a 1996 toyota camry


There is a cap in the top of the engine or in the top of the rocker/ valve cover, pull the cap and get out the funnel, pour it in, If you see a giant puddle on the floor after you do it, you will know you missed it. Hope this helps.

Feb 14, 2011 | 1996 Toyota Camry

1 Answer

I'm attempting to replace the valve cover gasket from a 1996 Toyota Carina (engine type E-AT211). Wiring, screws, plug wires, and plugs have all been removed; but, the valve cover is still attached solid....


TAP VALVE WITH RUBBER HAMMER OR TAKE A PIECE OF WOOD AND HAMMER.PLACE WOOD AGAINST VALVE COVER THE TAP WOOD WITH HAMMER VALVE COVER SHOULD LOOSEN UP.

Jan 03, 2011 | 1997 Toyota Camry

2 Answers

HOW TO SET TIMING ON 96 TOYOTA CAMRY 2200 MOTOR


Click on the following free direct Link. It has the Timing: Pulley, Belt and Mark Diagrams for your 1996 Toyota Camry. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/toyota/model/camry/1996_toyota_camry_timing_belt_diagram_marks.htm

Mar 28, 2010 | 1996 Toyota Camry

1 Answer

Leaking oil from the engine ...camry 1996 v6 3.0L


Oil leak can be attributed to several factors.
1. Gasket failure.
2. Uncontrolled Crank case pressure Failure.

RECOMENDATION:
Tighten both the valve cover and oil pan bolts.
Replace the Positive Crankcase Ventilation Valve and vacuum line.,

INFO: PCV
This is a valve causes a negative vacuum on the engine while its running, As to say if it had a leak in a valve cover it should not be leaking while its running, only when the engine it turned off.

Hope this tip guides you in the correct direction to solve this problem.

R/
David

Mar 03, 2010 | 1996 Toyota Camry

1 Answer

Is valve adjustments needed on 2000 camry V6 I am hearing noises that seems like coming from under valve cover, you can hear the noise from inside car,but not from outside of car. I was told this engine...


The valve adjustment usually isnt done unless there is valve noise. If you think its valve noise, have the dealer check it or a shop that does a LOT of Toyota work. Special tools and shims are needed to adjust the valves. Its a LOT of work and will not be cheap. You will want to replace the spark plugs at the same time.

Dec 01, 2009 | 2000 Toyota Camry

1 Answer

Toyota camry valve


The PCV valve? It's on the valve cover. Will see a vacuum line coming off the valve cover.

Sep 22, 2009 | Cars & Trucks

Not finding what you are looking for?
1996 Toyota Camry Logo

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...