Question about 1990 Chevrolet K1500
Posted by Anonymous on
You have stumbled on the problem when you reduced the fuel flow / pressure when it fired with the fuel line off
yes it has good cone shape at the injectors but excessive fuel so it is in effect flooding
Posted on May 22, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i am getting fuel to
Add techroline fuel injector cleaner and replace your fuel filter to increase the flow of gas to the injectors. You may need to repeat the cleaner until the injectors are clean.
Posted on Jul 19, 2008
Try using a good fuel line/injector cleaner Seafoam is a good one. If this does not help you may have tone or more clogged injectors. Clean these out and you should be good to go. tTo see Seafoam in action goto you tube type Seafoam into the search box.
Posted on Jul 08, 2009
Barring any ignition problems, it may be one of these sensors that are part of the TBI.
TPS throttle position sensor, and the IAC idle air control
the following web page has some good info
Posted on Aug 10, 2009
Put an injector noid light at the injector plug terminals to see if your getting a signal from the PCM(computer).If not try to find a computer from the same vehicle that works and swap it into yours to check.A PCM swap will take about 15minutes.
Posted on Sep 23, 2009
Tips for a great answer:
Jan 26, 2017 | 1987 Chevrolet Blazer
Jan 12, 2012 | 1985 Ford Ranger
Mar 26, 2011 | Chevrolet 1500 Cars & Trucks
May 19, 2017 | 1990 Chevrolet C1500
Mar 09, 2010 | 1990 Chevrolet K1500
Dec 16, 2009 | 1998 Chevrolet K1500
Aug 10, 2009 | Chevrolet C1500 Cars & Trucks
Jan 24, 2009 | 2003 Chevrolet Cavalier
133 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: