Question about 1999 Ford Ranger SuperCab

1 Answer

I have a 1999 ford ranger 3.0 automatic transmission an my truck will start an go in gear but will not move wen gas pedal is press it jus rams the engine up wat could b my problem??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 159 Answers

It sounds like you have a problem with your transmission. If it has overheated in the past, it might be fused, it could be low or out of transmission fluid ... or there might be some sort of debris inside the transmission causing it to lock up. Automatic transmissions are not directly linked to the drive shaft like a manual transmission is (so when you hit the breaks on the highway the vehicle does not fight against you slowing down). For this reason, you would be able to put it in gear and the engine will not just stop (like releasing the clutch on a manual with the emergency break on). I recommend taking a look at the transmission fluid first. If it is low or empty, fill it.
If the transmission fluid is black or has a HUGE amount of debris in it then take it to a transmission shop and have them take a look. if it is full, still red, and has little or no debris in it .. I would still recommend taking it to a transmission shop to have it looked at -- it might be a locked differential or something simple .. but it is impossible to tell without taking a look at the truck.

Posted on May 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford F150 truck


auto transmission -check the reverse servo/ solenoid operation
manual transmission--check for loose selector fork for reverse , broken selector fork, stripped reverse gear, reverse gear key failure

Sep 15, 2016 | 2004 Ford F150

1 Answer

My 1999 ford ranger shifts hard from 2nd to 3rd gear what is the problem I recently changed fluid and filter but shifts hard !


Auto Trans not shifting correctly from 2nd to 3rd - Ford Explorer ...

www.explorerforum.com > ... > Under the Hood

May 8, 2004 - 19 posts - ‎9 authors
Auto Trans not shifting correctly from 2nd to 3rd Under the Hood. ... Become an EliteExplorer. Lithuania. 1999 5.0. Join Date: Jun 2003. Posts: 107 ... When this happens, the transmission will skip to the next gear like you said.

Transmission Harsh shifting - YouTube

? 3:59
https://www.youtube.com/watch?v=aAoiL4vR8Qw
Jan 13, 2013 - Uploaded by James Burns
... Doctor, explores the causes of harsh shifting in automatic transmissions. ... Early diagnosis is important to ...

Hard Tranny Shift between 2nd & 3rd - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Feb 24, 2012 - Hard Tranny Shift between 2nd & 3rd Super Duty & Heavy Duty. ... I just got a new to me 99 f250 5.4 V8 SD XLT 4x4 Auto Trans longbox 118k miles. ... it out and said it was solid except for a hard shift between 2nd and 3rd gears. ..... Hard shift between 2nd and 3rd, Brenda Lamka, Explorer, Sport Trac, ... hard shift 2nd to third gear only 4r100
Dec 26, 2012
hard shift into 3rd
Nov 4, 2009
4r55e 5r55e Ranger / Explorer Transmission Problems - CLICK ...
Mar 15, 2007
00 Expedition trans shifts late and hard

Jan 01, 2016 | Ford Cars & Trucks

1 Answer

1999 ford ranger


does it do the same parked? Throttle up and does it do the same? Could be fuel, injectors, timing, vac problem, ect.

Oct 17, 2013 | Cars & Trucks

1 Answer

Stuck shifter


You Have a broken shifting yolk inside the transmission

Aug 28, 2013 | Ford Ranger Cars & Trucks

1 Answer

1955 Ford Crwn Vic neutral switch will permit start in any gear not just neut or park. Is this a 2 or 3 speed auto transmission? will start in drive selection and only shift once witn no kickdown gear at...


A 1955 Ford would have a Ford-o-matic transmission which has three speeds forward. The transmission starts out in second gear unless you shift into low.
I am not aware of these transmissions having a neutral safety switch.
The 3 speed automatic transmissions that started in low and had a downshift to second under load were first used in the mid 1960s.

Apr 09, 2013 | 1991 Ford Ranger Supercab

1 Answer

1992 FORD RANGER AUTOMATIC TRANSMISSION WILL NOT SHIFT INTO GEAR


check your brake pedal push down see if your brake lights are coming on if they are not check the switch at your brake pedal that also let you engage tranny into gears

Feb 17, 2013 | 1992 Ford Ranger

1 Answer

2001 Ford Ranger automatic transmission will not move truck. Just slips


Time for a transmission rebuild, the clutches are shot or the system has a pressure failure.

Jul 10, 2017 | Cars & Trucks

1 Answer

2000 Ford ranger 3.0 L automatic granny will barley move in reverse but drives good in forward gears what would cause this?


My automatic granny doesn't move that fast either. It sounds as though your reverse gear is going out, the only thing I can suggest is taking it to a transmission repair shop... sorry =(

Apr 07, 2012 | 2000 Ford Ranger SuperCab

1 Answer

1988 Ford Ranger 4x4- gear shifter moves into gear, but nothing happens. Truck appears to be in R, D, etc, but when I push the gas pedal the engine revs and the truck doesn't move.


check your lincage to be sure ite actually going into gear you will have to block the tires and have someone shift it from p to 1 then back again, if it does this then check the fluid level but it sounds like your transmission is bad.

Aug 25, 2010 | 1988 Ford Ranger

1 Answer

What controls the reverse gear in a 1999 ford ranger transmission?


In an automatic trans its controlled by the reverse band which is pressed by a servo which gets pressure from the valve body. This transmission is known for leaks in the valve body because of seperator plate gaskets becoming brittle.

Mar 18, 2010 | 1999 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...