An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: Main Relay on 92 Honda Accord
On you Honda Accord the main relay is located.
On left side of dash, under the Instrument Panel. Left side of the Steering Column.
To get axces You will need to Remove the Cruise Control Module. That is attached with 2, 10mm screws. one on the Steering column, the other one at the dash braket.
after you remove the cruise control module, you will see a Little Box Gray colour, Is a Relay more biger than a Regular Relay.
The NUMBER on the RELAY is : RZ0088.
OK.. I hope this help on your question.
Thank you for use fixya.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A/C Problem usuallyabout 200,000 miles (specifically high pressure hose leaks and compressor clutch usually within 30,000 miles of the hose going.)
At about 250,000 miles or so the main relay goes usually at about 290,000 Torque convertor in Automatic Transmission starts to slip.. Manual tranny can't say too much there depends on how you drive . replace clutches at every 50K or at 150K depends on driver.The cat and the mufflers usually go at abot 190,000 give or take (depends how much water you drove threw). Lastly fast idle cam valve about every 120,000. As you can see this is a great car to own.
there is no plug for ur vehicle... ur car is obd 1 on board diagnostics system 1... but u can pull back the carpet on the lower passenger floor (where a passengers feet would rest) and check the computer for a window that has a little red l.e.d light that may be flashing... u can tell what codes are stored by counting these flashes in the correct way and sequence...