Question about 1995 Oldsmobile Cutlass Supreme

1 Answer

When I turn the ignition key to start engine all dash lights light up but get nothing else.

Posted by on

  • khaled hussien May 29, 2011

    did you get clicking sounds or nothing at all ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,194 Answers

Most of the time this has to do with the anti theft security system. You may not even know that you have it, but it all stems from that little black "chip"in your key. That chip sends a signal thru the ignition, and then to the TDM computer. If any of these parts or wiring fail, your car will fail to start. The expensive part is trying to figure out which part is failing. I've had the best luck with just bypassing the entire system forever and never having to worry about this again. Info and answers on this site. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Posted on May 29, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 bmw e36 320i engine won't turn over or and no clicking sound coming from starter when i turn the ignition but all the light comes on what could be the problem,


The starter won't crank. If nothing happens when you turn the ignition key to the "Start" position, it means that the starter motor doesn't turn over the engine. Most commonly this could be caused by a dead battery; here is How to check the battery. ... The starter motor itself or a starter solenoid could be bad.13 Aug 2013

Why a car won't start - troubleshooting tips - Samarins.com


car not starting when key is turned to the on position Google Search

Dec 20, 2016 | BMW Cars & Trucks

2 Answers

Have a 2004 dodge caravan battery went put in a new one interior lights came back on when turn the key to start the van it shuts off no lights no nothing and in a few minutes the lights come back on


Try this to reset the system

Insert the ignition key into the driver side door lock.

  • Turn the key counterclockwise to unlock the door.

  • Turn the key clockwise to initiate the alarm activation sequence.

  • Turn the key counterclockwise. The alarm will stop and reset itself.


  • Nov 17, 2016 | Dodge Cars & Trucks

    1 Answer

    Electrical problems


    Same thing is happening right now on a 2002 Monte Carlo. When the key is simply turned to ON, all of the lights on the dash starts blinking rapidly. When I attempt to turn the car over, there is no CLICK or anything from the engine - nada. Ignition turns and the dash goes dark, as if it wants to TRY to start - but nothing happens.
    But, when I press the brake pedal (and the key is just sitting in the ON position), all of the blinking lights stops flashing and just stay lit. Therefore, I changed the brake switch, thinking it might make a huge difference. Didn't really help at all. When the key is turned, you can hear the fuel pump engage and everything seems to be ready to go. But, the car won't start (it will only start when it feels like it)...hit and miss, pretty much.
    Does anyone know the TRUE solution to this issue? Does the ignition need to be replaced in order to get this car to crank over

    May 05, 2012 | 2000 Chevrolet Monte Carlo

    3 Answers

    2009 HHR won't start. Battery is good.


    Is the security light on or blinking?If not then do you have power to the starter.You can check this with a test light.You should have power when you turn the key to start.The test light should light up.Should be the small wire.I believe it is purple in color.If the security light is on then you will have to get the codes to see what is causing the no start.Hope this helps.Good luck.

    Dec 07, 2011 | 2009 Chevrolet HHR

    1 Answer

    The car is starting 1/10.. Firts i turn ignition key and the light in the dash are lighting up good,i turn the key and nothing happen.I take the off the ignition and it make a tic-tic-tic on the...


    We have to assume the battery is usable, if not, anything else doesn't help. A couple of possibilities- First, get a simple, cheap device that uses a 9V battery and the car's cigarette lighter to prevent losing anti-theft codes. Once this is plugged in, remove the negative battery cable first, then the positive. CLEAN the battery connectors and terminals. Try to start the engine. If it still does the same thing, remove the negative battery cable again and follow it to its next connection and clean that point. While it is off, remove the other end of the positive cable which goes to the starter terminal and clean both points.
    While under the hood, look for the cable connecting the engine block to the body of the car and clean both ends of that cable.
    If the problem is still there, it can be related to one of these; the ignition switch, the starter solenoid or a corroded fuse connection. The starter is not protected by a fuse but the solenoid may be.
    Good luck-

    May 28, 2011 | Nissan 300ZX Cars & Trucks

    1 Answer

    Engine won't start


    Test the battery first(make sure it's charged 100%)
    There is single wire , not a fat cable , on the starter ,
    disconnect it , then use test light , connect it to that wire on one side and ground on the other side.
    Turn ign. key to start position and watch the light , if it's on - starter is bad , if it's off - ignition switch no good.

    Jun 04, 2010 | 1993 BMW 3 Series

    1 Answer

    Motor does not start when i turn on ignition


    did u have the alternator tested to see output get a jump if the car starts takeit to a auto zone have him test the battery and alternator for free

    May 03, 2009 | 1998 Volvo S70

    2 Answers

    Dash lights are not working 1999 Mercedes-Benz CLK


    most probable cause could be a faulty ignition switch. Does the lights on the dash come on when you turn the key to the on position ? Do they turn off when you turn the car to the start and are about to crank the engine ? If that does not happen you will have to replace the Ignition switch. They don't have a fuse for the dash lights.

    Dec 03, 2008 | 1999 Mercedes-Benz CLK

    1 Answer

    1006 olds cutlass supreme won't crank


    try taking a power wire from the battery positive and getting it on the starter terminal and seeing if the starter turns over if it does it could be a fusible link that runs between the starter terminal and the relay

    Sep 29, 2008 | 1995 Oldsmobile Cutlass Supreme

    Not finding what you are looking for?

    Open Questions:

    See all 1995 Oldsmobile Cutlass Supreme Questions

    1995 Oldsmobile Cutlass Supreme Logo

    81 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8572 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...