Question about BMW 318

1 Answer

2004 series 3 BMW 316i fitting a Towbar mainly how to remove rear valance

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • BMW Master
  • 22,133 Answers

You shouldnt need to remove the rear valance to fit a towbar ,i would suggest you contact a authorised towbar fitting workshop as it is not permitted to fit a towbar yourself ,it has to be done by a company with the correct authorised dealership as the towbar has to be certified with a europeon certificate of homoglonation and a plaque .then vehicle has to be presented at the vehicle inspection station for conformity .Then the paperwork of the vehicle changed to show its fitted with a towing hitch and a fee paid for this service .2004 series 3 BMW 316i - alicantecoli_18.jpgalso the electrics have to be connected by a auto electrician as every annual vehicle inspection the electrics are tested as well where a towbar is fitted .

Posted on May 29, 2011

Testimonial: "THANKS FOR INFO DID'NT KNOW IT WAS THAT INVOLVED. WILL SEE HOW MUCH GARAGE CHARGE."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do adjust my HandBrake , I have a BMW 316i


If you remove the rear wheels, through the bolt holes in the disc you should find a toothed wheel which needs to be turned with a screwdriver until the disc cannot be turned, then back off 6 teeth to prevent over adjustment and binding. (you can adjust the cables inside but this only takes up the slack and doesnt adjust the handbrake correctly) once they have been adjusted check the balance by driving gently forward and backwards whilst applying the handbarke and watching which side of the car reacts first then adjust the other side via the cable inside the car

Apr 28, 2010 | 2001 BMW 3 Series

1 Answer

Locate ignition module 1990 BMW 316i E


The ignition is controlled by the motronic control unit its mounted on the passenger side of the dash above the glove compartment.

Jan 30, 2010 | 1990 BMW 3 Series

1 Answer

Where would i find the starter motor on bmw 316i 1994 -1998 please


For BMW 316i 1994 - 1998 you will find the starter motor on the right part of the car at the bottom back right side of the engine, between clutch case (or automatic gearbox case) and cylinder block.

Jan 28, 2010 | 1994 BMW 3 Series

1 Answer

How do you take the back seats out of a bmw 320i se to fit seat covers


To remove the rear seats, force your hands under the front of the seat bottoms and lift with a quick, short tug. The bottom cushion lifts out with no tools. There will be a couple of bolts holding the seat backs in place.

Oct 06, 2009 | 2004 BMW 3 Series

2 Answers

1997 bmw 316i compact, thermostat??


it may be possible that your heater core was faulty and some has by passed it. open hood and check for incoming and outgoing heater hoses into firewall(dash of car). it is also possible that the heater core is plugged, try getting your cooling system flushed

Sep 09, 2009 | 2009 BMW 3 Series

1 Answer

Repair e36 bmw


open the bonnet remove the black plastic over on top of the grill and this reveals the back of the grills so you can push themout from behind and not damage the paint.
Good luck davelee

Mar 21, 2009 | 1994 BMW 3 Series

1 Answer

316i bmw


I WOULD LIKE YOU TO CHANGE YOUR PCV VALE FITTED TO YOUR INLET MANIFOLD

Jan 21, 2009 | 2003 BMW 5 Series

1 Answer

Fitting new ignition barrel series 3 1996 316i


turn to position 1 you will see a nick nexet to the key push a thin peace of wire in nick the barrol will come out with key in it

Jan 18, 2009 | 1994 BMW 3 Series

1 Answer

How do i turn in my rear view mirrors


On drivers side internal door handle there's a small, joystick and an up-or-down switch. the former moves the mirror while the switch selects which mirror. good luck !

Oct 28, 2008 | 2001 BMW 3 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...