Question about 1999 Chevrolet Malibu

1 Answer

What do i need to replace the fuel filter for tools and whear is it located

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,370 Answers

You will require basic tools like socket wrench, screw driver, socket set, crescent wrench.That will be good to remove the fuel filter.To get instructions to replace fuel filter. Click the link below;--- http://technoanswers.blogspot.com/2011/05/how-to-remove-fuel-filter-on-1999-chevy.html ---------- This will help.Thanks.Helpmech.

Posted on May 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel filter located at on a 2007 f150 5.4v8 engine?


You'll find the fuel filter inline on the inside of the frame rail just under the driver seat location. You'll need a special plastic tool that wraps around the fuel line to press into the connection to remove the filter from the line on both ends of the filter. Just push this tool into the connection and pull the filter off the line. To replace the filter just push it on the line and it is connected. Be sure it's set in proper direction of flow and pushed on solid.

Oct 18, 2014 | Ford F-150 Cars & Trucks

1 Answer

Inline fuel filter replacement


First off you will need to go to a local parts store and get the filter clamp release tool. Then locate the fuel filter under left (drivers) side of the car usually on the frame rail between the fuel tank and drivers door. Remove small locking clips from the filter clamps. Next and use caution and eye protection as fuel line will likely still have some presure. slide clamp release tool into open (filter) side when you get it in position push fuel line and filter together set clamp release tool tight by pushing it toward fuel line then pull on fuel line it should slip right off. Repeat for the fuel line on the other side of the filter. To reinstall simply look for the arrow on the filter and with itr pointing toward the engine push fuel line clamps back onto fuel filter. Replace safety locks turn ing. on and off about 5 times then crank the engine to start.

Jun 30, 2011 | 1990 Ford Taurus

1 Answer

How do i change the fuel filter in my gmc sierra 3500 diesel 6.5 and whear is located??


FUEL FILTER MOUNTED ON A BRACKET TO THE REAR OF THE INTAKE MANIFOLD.TO REMOVE FUEL FILTER.TURN OFF IGNITION.RELEASE ANY PRESSURE OR VACUUM IN THE TANK.DRAIN THE FUEL FROM THE FUEL FILTER BY OPENING BOTH THE AIR BLEED AND THE WATER DRAIN VALVE ALLOWING THE FUEL TO DRAIN INTO A SUITABLE CONTAIMER.UNSTRAP BOTH BAIL WIRES WITH A SUITABLE TOOL AND REMOVE THE FILTER.INSTALLING THE NEW FILTER ENSURE THAT BOTH FILTER MOUNTING PLATE FITTINGS ARE CLEAR OF DIRT.SNAP THE FILTER INTO PLACE WITH THE BAIL WIRES.CLOSE THE WATER DRAIN VALVE AND OPEN THE AIR BLEED VALVE.CONNECT A 1/8 INCH I.D HOSE TO THE AIR BLEED PORT AND PLACE THE OTHER END INTO A SUITABLE CONTAINER.DISCONNECT THE FUEL INJECTION PUMP SHUTDOWN SOLENOID WIRE.CRANK THE ENGINE FOR 10 - 15 SECONDS THEN WAIT 1 MINUTE FOR THE STARTER MOTOR TO COOL.REPEAT UNTIL CLEAR FUEL IS OBSERVED COMING FROM THE AIR BLEED.IF ENGINE IS TO BE CRANKED OR STARTED WITH THE AIR CLEANER REMOVED CARE MUST BE TAKEN TO PREVENT DIRT FROM BEING PULLED INTO THE AIR INLET MANIFOLD WHICH COULD RESULT IN ENGINE DAMAGE.CLOSE THE AIR BLEED VALVE RECONNECT THE INJECTION PUMP SOLENOID WIRE AND REPLACE THE FUEL TANK CAP.START THE ENGINE ALLOW IT TO IDLE FOR 5 MINUTES AND CHECK THE FUEL FILTER FOR LEAKS.

Oct 23, 2010 | 1993 GMC Sierra C3500

1 Answer

Replacing my fuel filter on a 2000 Buick LaSabre Custom..any special tools needed and where is it located


There is no special tools needed, you will probably find the fuel fuel filter beneath the undercarriage of the vehicle, check both sides just below the seating area and if not found there you will have to trace the fuel line from the fuel tank forward intil you locate the fuel filter.

Aug 28, 2010 | Buick LeSabre Cars & Trucks

2 Answers

Whear is the fuel filter in my 1993 oldsmobile nintey eight


The fuel filter is located in the frame rail behind the right front wheel area.this will be on the inside of the frame rail.Make sure you relieve the fuel pressure before removing the filter lines.You will get fuel coming out when you remove the lines.Hope this helps.Good luck.

Mar 15, 2010 | 1993 Oldsmobile Ninety Eight

1 Answer

Need to change fuel filter


2008 Pontiac G5
2008: Base; 4 Cyl 2.2L; "GAS, FI, L61, VIN F" 2008: GT; 4 Cyl 2.4L; "GAS, FI, VIN B"

c9daaad.jpg

How to Replace a Fuel Filter
(DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.

Hope help with this.

Mar 12, 2010 | 2008 Pontiac G5

2 Answers

Where is the fuel filter located on a 2006 Ford Freestar


Hello there:
if you have your filter great or if not use FRAM G8018 from WalMart for around $8 and then get the fuel line removal tool from Pepboys or autozone for $7. Tool should be 5/16" fuel line disconnect.


  • No need to raise the vehicle.
  • Due to the amount of fuel,that could come out I would use battery powered work light, not 110V AC for safety reasons.

  1. Pull relay #53 from fuse panel under hood. This disconnects fuel pump.
  2. Start engine and let it die. Restart again.
  3. Filter is located under passenger side center seat.
  4. sometimes more fuel will come out than expected. so make sure to Use a clean oil drain pan, or coffee can to catch the excess fuel .
  5. Use tool to disconnect fuel lines. Loosen single screw/clamp. Note the direction of filter.
  6. Replace filter, tighten clamp screw, reconnect fuel lines.
  7. Replace relay. turn the key to the on position for 45 seconds to get the fuel back in the lines
  8. Test by starting car, shut it down, look for leaks. If no leaks start car again, let idle and inspect for leaks again.
Hope this is very helpful for you.
Best regards Michael

Jan 12, 2010 | Ford Freestar Cars & Trucks

2 Answers

I need to change the fuel filter. where is it located. do i need special tools ?


The fuel filter on most Mazda cars can be located on a bracket in the left rear of the engine compartment, next to or beneath the brake master cylinder fluid reservoir or as part of the fuel pump assembly.

On the Millenia, the fuel filter is located beneath an access cover in the trunk. Access to the cover is achieved by removing the trunk mat to expose the cover.


The filter on Mazda 3 models is part of the fuel pump assembly.


The fuel filter on all Mazda cars can be located on a bracket in the left rear of the engine compartment, next to or beneath the brake master cylinder fluid reservoir or as part of the fuel pump assembly.



How to Replace a Fuel Filter
Parts:
  1. Fuel Filter - $175.45

Tools:
  1. 3/8 in. drive ratchet - $7.55
  2. Hose pincher - $4.07
  3. Flare nut wrench - $5.53
  4. Flat Head scredriver - $3.14
  5. Socket Set
Steps:
Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.

1. Fuel filter in engine compartmentf9b91e0.jpg
Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

  • 2. If the fuel filter has a clear case, inspect the filter element for dirt.

  • 3. If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
  • Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine

  • 4. Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.
  • 5. Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.
  • 6. Start the engine and check for fuel leaks.
  • 7. Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.

  • Good luck (remember rated this help).

Nov 09, 2009 | 2004 Mazda 6

1 Answer

Need the location of the fuel filter on a 1997 Ford Exployer AWD


The fule filter is up inside the frame on the drivers side. You will need to get special tools to get it off. Since it is a high pressure system you CANNOT cut it out and replace it. Must get the special tools.

Oct 06, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...