Question about 1984 Ford Mustang

Open Question

I have a 1984 mustang covertiblile. I want to know whatv was the original fluid used in the covertible pump. The fluid thats in there now is clear in color,but IUve learned that it still can be trans fluid or break fluid. The instructions say, DO NOT MIX ! Thank you.

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: The break lights are not working on my 1984 Ford

Check them one at a time, replace the blown one, should be fixed. If it doesn't fix the problem, or you don't find a blown one, that wasn't the problem.

Posted on Jul 25, 2009

  • 10 Answers

SOURCE: im trying to figure out how to check the fluid

its really not that hard but ou do hahe to get under your car. lift your care up so that you can fit well under it . Support your car with jack stands for safty than on de side of the transmission there is a plug, the plug is round with a square in the middle the use your 3/8 rachet to take it off if transmission fluid leaks out transmission fluid level is fine if not add some trough that same hole till it leaks out then put your plug back on.

Posted on Oct 27, 2009

  • 111 Answers

SOURCE: what transmission fluid does a 1984 s-10 wit a v6 four speed tran

your transmission calls for a dexron/mercon 2, anything compatable with dex merc2 will work, even the new dex 3 , or the dex 4. the labels should tell what it is compattible with.

Posted on Nov 02, 2009

  • 1 Answer

SOURCE: I have a 03 F150

no you cant drain converter

Posted on Oct 23, 2010

  • 277 Answers

SOURCE: Need to know what the


for a 1990 mustang

Posted on Dec 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i bleed the brakes on my 1984 ford mustang never done it before

same as any nother car. take off mastercylinder cap. get a helper set in the drivers seat. apply pressure to the brake peddle. with a box or tube wrench break the fluid *** on the top of the calliper/back of drum loose. foot pressure on peddle should push it to the floor -hold it on the floor! tighten the *** on the caliper/drum tight-ish. not over tight. then let peddle up off floor. pump till you get resistance/tighteness. hold pressure on peddle, loosen *** again and peddle will go to floor again tighten ***, lift up peddle pump for pressure. repeat untill all air is out of line/ or fluid runs out clear. never let the master cylinder get low on fluid. have plenty on hand. repeat for all 4 tires.

Aug 10, 2012 | 1984 Ford Mustang

2 Answers

No power where is relay? for 1984 3.8 fuel pumps

hi, i think in that year the fuel pump is bolted to the engine right hand side. these have a glass bowl on the top, one pipe IN and one pipe OUT. but i could be wrong gerry

Sep 09, 2010 | 1984 Ford Mustang

1 Answer

I replace both fuel pumps on my 1984 mustang 3.8 no elect getting to them can't find reg or main place to get power/ please help

check fuse and relay in engine compartment. Relay should click when key is turned on. If no click, replace relay.

Sep 09, 2010 | 1984 Ford Mustang

1 Answer

What all do you need to do to convert a 1992 ford 5.0 out of an f150 from fuel injection to a Carb.? I know that you need a carb, intake, and fuel pump. I'm putting this motor in my 1984 mustang it had a...

There are special electronic fuel pumps you can get for this kind of conversion that wont put to much fuel pressure in the carb and blow the bowls.
As long as the distributer is vacuum advance and for a 302 it should be able to work. The main difference will be the firing order on the truck engine may be different. So you have to make sure your #1 cylinder is at top dead center and route the post on the cap its pointing at to the #1 cylinder and go from there.
The intake and carb you have should also work.

Mar 26, 2010 | 1984 Ford Mustang

1 Answer

I put a new starter on a 1984 mustang i bought and solenoid but it cranks and wont turn over.

sounds like a fuel problem.

ensure there is gas and check to see in the fuel pump is working.

but your problem is deffiniately in the fuel system!

Feb 26, 2010 | 1984 Ford Mustang

1 Answer

Bleed the brake lines

start at the passenger rear tire, have someone PUMP up brakes and hold pressure on them, release pressure by locating small bleeder screw, loosen screw 1/4 turn, brake fluid/air should come out, after brake petal reaches floor tighten bleeder, repeat process until only brake fluid comes out. go to driver side rear repeat, go to pass. side front repeat, go to driver side front repeat, after each bleeding make sure you check brake fluid in reservoir.

Sep 24, 2009 | 1984 Ford Mustang

2 Answers

What type of oil do i put in my 1984 3.8L mustang?


Thanks for using FixYa!

I suggest that you use the Mobil 1(10w-30) oil. Its the best out there. I hope this helps.

Have a nice day.
- HotRatchet

Jul 31, 2009 | 1984 Ford Mustang

1 Answer

Fluid for a 1993 ford mustang

Transmission : Castrol MerconV ATF

Engine Oil: 5 W 30

Differential: 90 weight gear oil

Cooling system: 50/50 mix coolant/water

Brakes: High performance DOT 3

Hope this helped you and best wishes.

Jul 05, 2009 | 1984 Pontiac Firebird

3 Answers

2000 Ford Mustang Convertible Slow Top Opening

My 2000 Mustang convertible has a noise and leaks fluid where could i go to fix it

Jul 09, 2008 | 2000 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides