Question about 2009 Ford Focus

Open Question

Can I change my Ford Focus 2010 Sat Nav to display miles instead of km? I have got the trip computer to display imperial but cannot find an option to do the same with the Sat Nav.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: ford denso sat nav

unplug the radio from the back and plug it back in

Posted on Jul 17, 2008

  • 9 Answers

SOURCE: fuse for 1999/2000 ford focus diesel estate cigarette lighter

its fuse 46 and it should be a 15 amp according to the manual as i have the same car as you hope this helps

Posted on Apr 13, 2009

  • 335 Answers

SOURCE: timing belt 2003 ford focus

Check with the dealer to get belt change interval. 100,000 to 160,000 km is the most recommended.

Posted on Jul 22, 2009

Keef2011
  • 160 Answers

SOURCE: ford focus 2003 TDCI the

The fuse for tis lighter assembly has probably blown. Look in the fusebox for a blown blue color fuse. Replace this for a 20 amp yellow one. If you are powering items from this plug, it will need the extra 5 amp to cope. Hope this helps

Posted on Mar 10, 2011

Zim1308
  • 543 Answers

SOURCE: I have a F Ford

First, if there is a bad fuse you will be able ot tell the difference immediately. As there will be a break in the fuse-able bit.

zim1308_0.jpg.

Good Bad (Blown)

that being said if you do find that the fuse is still good the next thing you will have to do is preform a continuity test. Using a Test light (you can get one form your local Sears or auto supply store) connect it to a GOOD known ground. (usually the chassis is fine as long as there is no paint on the part you are clipping to). and touch it to the power side of your accessory outlet. if the light goes on then you need to try testing the wire from the fuse block to the outlet itself,

Posted on Apr 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the mileage from kilometers to miles on my 2009 Ford Fusion?


I km = .62 miles.

10000 km = 6200 miles.

Check car manual to see if the display can indicate miles in lieu of KM's

Sep 25, 2015 | 2009 Ford Fusion SEL

1 Answer

How to change from km to miles


go to settings in message center

Sep 07, 2014 | 2010 Ford Focus SE

1 Answer

Miles traveled trip counter location


normally a small button in the speedo panel that you press in for a few seconds until the mode changes and the setting will display.

Sep 14, 2013 | 2010 Ford Focus 2.0

1 Answer

Sat nav not speaking


Mercedes commans sat nav version 4.1 for E220, is saying off road, and when at home is showing on map that I am somewhere in the National Park Peak District. I have been told to remove fuse for sat nav should be no 28 but in boot of car near sat nav cassette fuses in box only go upto 20. Am I looking in the right place?

Sep 12, 2012 | 2009 Ford Focus

1 Answer

Sat nav on jag xf. the direction arrow on sat nav always points in compass direction of travel ie if going south then arrow points down over. is it possible to have arrow always pointing up like tom tom


the touch screen on the car should allow you to change the compass setting...I cant remmeber if yours has this but see if you can touch the compass on the screen display to make the direction allow of the car be in accordance with the cars real movement or north as you wish..Keep me posted

Sep 12, 2011 | 2010 Jaguar XF

1 Answer

How do I change from Km to Miles on the odometer for a Rav 4 (2006)?


Disconnect the battery for 90 seconds, then unplugged the cluster.. Then connect the battery with no cluster.. HVAC display changed to metric...

Re-connected the cluster again, display changes to imperial...

The cluster is what dictates what is displayed. It is metric by-default but a US imperial instrument cluster overrides that.

Jun 29, 2011 | 2008 Toyota RAV4

3 Answers

How do you reset the oil change required after oil change on a 2007 ford explorer sport trac limited?


Depending on your cluster its one of these...


Message Center Configuration
Oil Life Reset - Message Center Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days

  1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
  2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
  4. The message center displays SETUP MENU HOLD RESET.
Oil Life Reset - Base Instrument Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

  1. Place the ignition in the RUN position with the engine off (KOEO).
  2. Press and release the TRIP/RESET button until SETUP MENU HOLD RESET is displayed.
  3. Press and hold the TRIP/RESET button until SYSTEM CHECK is displayed.
  4. Release the TRIP/RESET button.
  5. Press and release the TRIP/RESET button to scroll through the system check menu items until HOLD RESET IF NEW OIL is displayed.
  6. Press and hold the TRIP/RESET button until OIL LIFE SET TO 100% is displayed.
  7. Release the TRIP/RESET button. The oil life is now reset.
Oil Life Start Value - Message Center Cluster

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was previously changed or to lower the value from the maximum (8,000 km
To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
  1. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
  2. Press RESET control to display "HOLD RESET IF NEW OIL".
  3. Press and hold RESET control for more than 2 seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed

Mar 06, 2011 | 2007 Ford Explorer Sport Trac

1 Answer

Trip computer


look in handbook as i honestly cant remember,you change the setting on the main display where you can change languages.havent done one for a while and they change functions on these like joan collins changes her clothes

Oct 10, 2008 | 2003 Renault 181

2 Answers

Ford denso sat nav


unplug the radio from the back and plug it back in

Jun 30, 2008 | 2005 Ford Focus

Not finding what you are looking for?
2009 Ford Focus Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...