Question about Mitsubishi Montero Sport

Open Question

92 swb paj very creaky suspension/chassis worse when i reverse shockies seem fine wondering if theres grease nipples im unaware of

Posted by on

4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 362 Answers



The red dots and circles are grease fittings.

Posted on Feb 25, 2009

michigan man
  • 3533 Answers

SOURCE: where do i grease cv jionts on my pulsar n13 hatch?

get a needle (napa or autozone should have one) for the grease gun and poke the rubber and fill with grease and also try to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

  • 469 Answers

SOURCE: I'd like to grease the front and rear axles but can't locate the grease nipples.

Check the area where the fittings should be.The holes may be plugged, you will have to remove the plugs and install grease fittings.
Hope this is of some assistance.

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Does a 2008 pontiac g6 have grease fittings on the front suspension?

Unfortunately I don't know first hand, but if it does they will look like this

either the small hex head plug being there, or the grease nipple itself. If not fitted there will simply be a blank-face plate on the end of the ball joint or suspension joint.

Feb 04, 2017 | 2008 Pontiac G6

2 Answers

Have squeak coming near front axle on passenger side

on what that would really help, check brakes

Sep 30, 2014 | Cars & Trucks

1 Answer

Clunking noise coming from the driver side front tire on my 2010 dodge caravan I found my tie rod had no grease nipples and the boots were torn so I bought a new one properly installed nipples and tie rod...

try jackin the car up and turning the wheel to were the tie rod is inside the undercarriage then look to see if maybe there might be an area that it could be rubbing off on.

Sep 29, 2013 | 2010 Dodge Grand Caravan

1 Answer

1998 isuzu amigo 4x4 3" lift front suspension problems no travel verry stiff

if you have lifted the front suspension by 3 inches then that is 3 inches less travel for the shocky piston to move when the suspension goes down. You have probably damaged the piston and shaft of the shocky. Replace with longer travel shockys.

Jun 01, 2013 | Cars & Trucks

1 Answer


Hi and welcome to FixYa!

Pretty much a suspension bushing problem. If the lower suspension bushing is worn out, it tends to make a creaky noise. Once replace you'll be good.

Hope this helps and thank you for using FixYa! Have a good one!

Mar 03, 2011 | 2001 Chevrolet Silverado 2500HD

1 Answer

Is there any greasing nipples for the GMC envoy slt 2003 ? & If any where are located? squeaking noise at the left front

There are no grease fittings on most of today's cars. The squeaking noise may be coming from a dried out suspension bushing.

Sep 13, 2010 | 2003 GMC Envoy

1 Answer

Hi I have a problem with my 95 Paj.. 2800 Super Exceed


Jan 23, 2010 | Mitsubishi Montero Cars & Trucks

1 Answer

Sorry, I made a mistake. I would like to know how to lubricate the suspension.

nothing to lubricate suspension wise. there are chassis points that can be lubed. look for grease nipples in the undercarriage, front end mostly

Oct 18, 2009 | 1997 Ford Crown Victoria

1 Answer

Van has developed a sqeaking noise from front

sadly the people that make cars now a days dont believe in grease fittings you may have to replace it with a after market brand with a fitting

Mar 04, 2009 | 2000 Ford Expedition

1 Answer

Hyundai Excel Rear Supension 99-2000 model

1. Apply the specified grease to the inside of the left suspension.
2. Using special tools (09555-21100, 09555-21000), drive bushings, into the suspension arm.

1) Apply grease to all outside surfaces of bushings.
2) Drive bushing in until the notch on the special tool
(09555-21000) reaches the end of the suspension arm.
3. When replacing the dust cover, insert a new one up to the center position (stopper) of the right suspension arm.
4. After applying grease to the surface of the right suspension arm, install the rubber stopper.
5. Slowly push the right and left suspension arms together. Wipe away the surplus grease. Align the marks on the stabilizer bar and the stabilizer bar bracket.
6. Install the rubber bushings, fixtures and washers.
7. After aligning the fixtures with the suspension arms according to the alignment marks, loosely tighten the nuts.

1) Install the washers and fixtures in the correct direction
and position as shown.
2) Tighten the nut to specification with the vehicle lowered
to the floor.

8. Pack grease in the dust cover and lips, and secure the dust cover with the clamp.

Jun 21, 2008 | 1994 Hyundai Excel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides