Question about 1998 Oldsmobile Cutlass

3 Answers

1998 Oldsmobile Cutlass Supreme Blower Motor

How do I remove the blower motor?

Posted by on

  • 2 more comments 
  • spoplaw Nov 18, 2008

    How do you remove the body control module to get to the third screw on the blower motor?

  • Anonymous Mar 12, 2014

    what can putting the wrong oil in a 1998 oldsmobile cutlass

  • Anonymous Mar 12, 2014

    1998 oldsmobile cutlass is having poor acceleration

  • Anonymous Mar 18, 2014

    no charging at all

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It's not to hard to do, just have to lay upside down in your pas. floorboard, remove plastic panels under gloove box with small nut drivers,(can't remember size) then there are three hex head screws holding on the blowerplus the wireing connector, anf it has a wierd rubber gasket, hope this helps.

Posted on Sep 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My blower motor won't work took out what I thought was the resistor turns out to be a module I'm told with a rotted plug end .
Still trying too find a new module but can't locate the resistor???

Posted on Nov 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 298 Answers

It is behind the glove box ..it's a headache
you may want to get a chiltons manual from a parts store.

Posted on Aug 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of HVAC blower fan on 1995 Oldsmobile Cutlass Supreme Convertible


Under the right side of the dash, remove a trim panel and sound insulator, according to Haynes, slide the "convenience center" out of the way by loosening retaining screws, the blower motor itself has three screws holding it in.

Jul 18, 2016 | Oldsmobile Cars & Trucks

1 Answer

Replace blower resistor switch


look under the passenger side of the dash. it will be right next to the blower motor

May 17, 2013 | 1997 Oldsmobile Cutlass Supreme

1 Answer

How do i replace my blower motor on a 95 olds cutlass supreme


Click here to see how to remove blower motor.Click here to see relay.Click here to see resister,it next to blower motor.

Dec 15, 2012 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Location of heater blower


The blower motor is located under the passenger side of the dash. There is usually a trim panel that needs to be removed in. Order to gain access to the blower motor. Once the trim panel is out of the way you should be able to see the blower motor. If you have any questions let me know. Thank you for using fixya.com!

Oct 22, 2011 | 1998 Oldsmobile Cutlass

1 Answer

Where is the blower motor located on a 1992 Cutlass Supreme S?


Blower fan motor is located under the passenger side dash.
Remove the panel and then unbolt everything in your way until you come to a sort of triangular shaped blower motor.

Oct 02, 2010 | 1992 Oldsmobile Cutlass Supreme

2 Answers

How to replace a blower motor on a 99 oldsmobile cutlass


remove lower right dash insulator panal from beneath glove box. slide bcm aside to get to blower. remove the three screws holding the blower motor, pull blower and fan straight out. remove fan from old blower if replacing with a new motor. good-luck!!

Jul 17, 2010 | 1999 Oldsmobile Cutlass

1 Answer

Where is the blower motor resistor? 1994 olds cutlass ciera


It is in the HVAC housing just to the left and below the blower motor. You will have to Remove to right sound insulator panel from under instrument panel to see it.

Nov 09, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Blower motor access for replacement


Should be on the firewall under the hood or under the glove compartment. Depending on which engine you have in that car.

Jun 03, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

I have a 1993 cutless and the heater is not working...but the rear defrost still works


Check the blower motor resistor or the fuse for the heater. The blower motor resistor should be right next to the blower motor. I hope this helps. Good luck and best wishes.

Jan 20, 2009 | 1993 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1998 Oldsmobile Cutlass Logo

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...