Question about 2003 Chevrolet Venture Passanger

1 Answer

My 2003 chevy venture is "clunking" from the back

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,033 Answers

I don't think it would be so much the rear end problem. Either they are using are really cheap made wheel bearings or you have a caliper sticking which means the system may have air in the system or some sort of defective caliper. The same problem should not be returning unless the same part is being used such as a caliper. Also, you could have some bad bushings some where in the rear that cause a shift when applying brakes. Sorry I can't give any other help. It's easier to hear and see to help better. Good Luck

Posted on May 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clunking sound in the rear end of my 2003 chevy venture when going over bumps


could be anything and yet everything ,from a spare wheel not bolted down to a loose marble in the panelling ,i would suggest that you ask a local mechanic to have a ride to make sure its not serious like a shock absorber mount or a spring but without a drive i defy anyone to know exactly from this description

Apr 12, 2012 | Chevrolet Cars & Trucks

3 Answers

2003 Chevy Venture Warner Brothers Edition Mini Van 140,000 miles. Head gaskets blew yesterday. $2700 quoted to repair. Is it worth it to repair? What are other know issues with this model at this mileage...


what is the condition of the rest of the van? how does it ride, steer, shift and so on?
$2,700 is a lot less than replacing the whole van and you could end up buying someone elses headache if you go used..
if it ran really well before the gaskets went i would invest, if it had other issues i would trade it in

Sep 19, 2011 | 2003 Chevrolet Venture Passanger

2 Answers

I have a 2003 chevy venture van 3.4 V6 I need to know where #1 spark plug is located on the engine


Number one on a V6 is on the end that drives the alternator. One bank is closer to that end. So passengers side, front of car.

Jun 09, 2011 | 2003 Chevrolet Venture Passanger

1 Answer

What does the oxygen sensors look like in a 2003 Chevy Venture (warner Brothers Edition) ? How many are there? Where are they located? Can you show a picture of them in place? How do i replace them? Chevy...


There should be an O2 sensor before and after the catalytic converter on your vehicle, so it will have 2 sensors. You'll need a 7/8" open end wrench or an O2 sensor socket to replace them.

It'll look something like this: http://www.carsteering.com/data/all_images/48-01718.jpg

May 20, 2011 | 2003 Chevrolet Venture Passanger

1 Answer

Wondering if my chevy venture 2003 speedomiter has a fuse or cable it has stped working.


it is controlled by a cable that runs from the back of the speedometer to the transmission check connection at both ends and replace.

Sep 26, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

My 2003 Chevy Venture has an engine problem. It


Same vehicle. I had the #2 rocker arm bolt stripped out. Sounds like the same thing. Not to hard of a fix.... just take time. Or about 300-400 for a mechanic to fix.

Jul 14, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

Clunking on the passanger side in the front end


Have your C?V joints checked. Likely this is where the problem is coming from. Sometimes if the joint is excessively worn, lifting the vehicle changes the position of the joint enough to make the problem noticible (suspension travels much further when lifting than during normal operation) A joint in good condition will not do this. I can't be 100% on this because I can't see it, but I have seen this happen before.

Apr 06, 2009 | 2001 Chevrolet Venture

1 Answer

Clunking in rear end Jeep Liberty 3.7 automatic


Nearly impossible to tell you what it is without actually hearing and seeing it. I recommend that you check the rear universal joint, pinion bearing and wheel bearing assemblies for looseness. If it's that loud it shouldn't be too hard to find.
Good luck!!! If you need help doing the repair or have other questions just ask!!!

Mar 24, 2009 | 2003 Jeep Liberty

Not finding what you are looking for?
2003 Chevrolet Venture Passanger Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...