Question about 1996 Nissan Sentra

Open Question

Need serpentine belt adjustment rod - 1996 Nissan Sentra

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

warlock61
  • 659 Answers

SOURCE: serpentine belt/tensioner belt

is it a 24 valve?

Posted on Jan 04, 2009

aaangie220
  • 202 Answers

SOURCE: serpentine belt adjustment pully repair guide

the steps are to take the tire off remove the splash shield and there is the belt and pulley.

Posted on Jan 26, 2009

  • 114 Answers

SOURCE: need to replace serpentine belt.

You should see a spring loaded tensioner,usually right by the pulley you will see a square hole to insert a rachet,pull back and remove the belt.it might be helpful to have a friend to hold the rachet with the tension off the belt.Be careful if the rachet slips, there is a lot of tension on the spring and you could get hurt,watch your hands,don't put fingers between belt and pulleys

Posted on Mar 24, 2009

  • 73 Answers

SOURCE: adjust serpentine belt tensioner 2003 hyundai

has automatic belt tensioner

Posted on Apr 22, 2009

  • 5 Answers

SOURCE: need serpentine belt adjusted

You cant adjust the belt tensioner. You have to replace it if it wont provide the proper tension.

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What bolts do I loosen to tighten the power sterring belt on my 1981 buick reveria


IF you have a serpentine belt it's not a matter of adjusting the power steering belt tension because it's done automatically with a serpentine belt tensioner.
OTOH, if you have a separate V-belt you'll need to loosen the mounting bolt/nut at the bottom of the steering pump and the adjustment bracket then tighten the belt by moving the adjustment nut to tighten the belt.
You might be able to google a video of your particular engine power steering belt adjustment.

Mar 02, 2017 | Buick Riviera Cars & Trucks

2 Answers

Adjust fan belt toyota land cruiser 79 series 2008 model


Hi there , there should be a adjuster on the alternator, unless it's a serpentine belt, if a serpentine belt then you will need a new tension bled idler, hope this helps.

Aug 28, 2014 | Cars & Trucks

1 Answer

How do i adjust the tension belt on the alternator


You don't adjust the tension. The tensioner on that serpentine belt is spring loaded and never needs adjustment.
On a 2001 with normal miles (~125k), you should be on your second tensioner pulley and your third serpentine belt by now.

May 11, 2011 | 2001 BMW 330

1 Answer

I have a 1990 supreme cutlass and i don't know how to change the serpentine belt. What do I do?



2.8L and 3.1L Air Pump Belt

  1. Disconnect the negative battery cable.
  2. Loosen the air pump.
  3. Remove the worn belt.

To install:
  1. Adjust the belt to specifications and tighten the pump mounting bolts.
  2. Connect the negative battery cable.

2.3L Power Steering Belt
  1. Disconnect the negative battery cable.
  2. Loosen the adjustment bolts.
  3. Remove the power steering belt from the pulley.

To install:
  1. Route the belt around the pulley.
  2. Adjust the belt to specifications, then tighten the adjustment bolts.
  3. Connect the negative battery cable.

See Figures 6 through 15

0900c15280067989.jpg

Fig. Fig. 6: Unfasten the retaining bolts...


0900c1528006798a.jpg

Fig. Fig. 7: ... then remove the serpentine belt guard


0900c1528006798b.jpg

Fig. Fig. 8: ...


0900c1528006798c.jpg

Fig. Fig. 9: ... then remove the serpentine belt

  1. Remove the belt. Clean the accessory drive belt surfaces.



0900c1528006798d.jpg

Fig. Fig. 10: Serpentine drive belt routing-2.2L engine


0900c1528006798e.jpg

Fig. Fig. 11: Removal and installation of the serpentine belt-2.3L engine


0900c1528006798f.jpg

Fig. Fig. 12: Serpentine belt routing-2.5L engine with and without A/C


0900c15280067990.jpg

Fig. Fig. 13: Use an 18mm box end wrench on the pulley nut to rotate the tensioner on the 3.8L engine


0900c15280067991.jpg

Fig. Fig. 14: in. breaker bar to rotate the tensioner


0900c15280067992.jpg

Fig. Fig. 15: On the 3.4L, use a box end wrench, then rotate the tensioner clockwise and remove the serpentine belt

Remove the belt guard or coolant recovery reservoir as required.



Dec 31, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

2003 CTS 3.2L threw serpentine belt. Car made no


you bent a rod get the motor from someone other than dealer they will soak you

Oct 03, 2009 | Cadillac CTS Cars & Trucks

3 Answers

Car makes squeaky noise when i turn it on


CHECK IF POWER STERING IS LEAKING, IF NOT LEAKING TAKE W 40 SPRAY ON LOWER BALL JOINT AND TEST IF NO MAKE NOISE /IF NOISE STILL SPRAY ON STRUT RUBERS CHECK AGAIN , I AM SUE YOU WIL FIND THE PROBLEMI HAVE SAME PROBLEM SAME PROBLEM POWER HOSE STERING WAS LEAKING

Aug 07, 2009 | 1991 Honda Accord

1 Answer

Need serpentine belt adjusted


You cant adjust the belt tensioner. You have to replace it if it wont provide the proper tension.

Apr 13, 2009 | 2002 Toyota Highlander

1 Answer

How to tighten serpentine belt


if the belt is loose you might have the wrong belt installed on, or the serpentine belt tensioner must to be replaced, they adjust automatic, with spring loaded belt tensioner
and i will apreciate the ranking to my answer thanx

Jun 15, 2008 | 2002 Ford Windstar Cargo

1 Answer

Serpentine belt adjustment pully repair guide


the steps are to take the tire off remove the splash shield and there is the belt and pulley.

May 27, 2008 | 2001 Chevrolet Metro

Not finding what you are looking for?
1996 Nissan Sentra Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...