Question about Ford Fiesta

1 Answer

Hi I plugged the scanner in my ford fiesta endura diesel 2001 (y reg) this code number came up P1564 also said injection pump control module requesting reduced fuelling. When starting the car up it smokes white smoke signalling it is not getting enough fuel yet we have the above code coming up.Sometimes it picks up and runs normally when running sometimes you can walk away then come back and it plays up again. Wiring to the pump is ok as I have checked that already. Was also told to look at the T.D.C sensor.Would any of the timing sensors cause the problem with the pump? Any other advice

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 338 Answers

Would try a bottle of fuel injector cleaner ( for DIESEL) sounds like an injector or two are "hanging"open causing too much fuel in cylinder(white smoke) .can be intermintent as heck

Posted on May 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford fiesta radio code


Call your local ford dealer serial no. model no. and reg of the car and they can get it for you. If you have the owners manual pack for the car there will an audio book in this normally front or back cover there will be a small white stick on label with the code or also in the service record book

Apr 16, 2014 | 2006 Ford Fiesta 1.4

1 Answer

I have a 51 plate t280 diesel transit van it is not starting when plugged to the computer i am getting error code p1564and p0419


What is a Plate??
P1564 error code is the fuel injection pump requesting reduced fuelling
I have no info on P0419.

Sep 28, 2012 | Ford Transit Connect Cars & Trucks

1 Answer

Hi my friend has a 54 reg megane scenic 1.5 diesel. It cut out when she was driving and now wont start it shows on the dash "INJECTION FAULT". The car doesn't crank doesn't Evan sound...


with diesels , the major problem is air in the diesel lines
low fuel level hose loose etc
I would be checking and bleeding any air out of the system
then get it to an accredited diesel specialist shop for a check of pump pressures and injector control
there is a injector control module that will stop the engine but you will ahve to have a technician explain where it is

Jun 13, 2017 | Cars & Trucks

1 Answer

Ford fiesta diesel endura turn's over & try's


Normally, only 2 things stop a diesel from firing:
1. no fuel
2. not enough compression

No fuel can be caused by (obviously no fuel) or a failed fuel pump. To test, have someone turn the engine over and then sniff at the exhaust - does it smell of unburned diesel? (If you've run out of diesel recently, you may have an airlock in the system, this needs bleeding out.)

Not enough compression needs specialised equipment to test - that's a garage job.

Dec 29, 2009 | Ford Escape Cars & Trucks

2 Answers

P1689 code. Hard starting 2001 Dodge diesel. Fuel pressure before start 10 psi runs at 8 psi drive at 6 psi unless peddle fully down and over 3000 rpm 3 psi


P1689 - No communication between ECM & Injection Pump Module. This is why it's a hard start and the peddle isn't acting like it should. There's a problem where the (Computer) ECM, isn't making contact with the Injection Pump module. So the computer doesn't know what the pump is doing or sending. Could be a cut in the, corrosion, etc.. So many things it could be, but this is why your truck is acting stunned.

Nov 25, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

Fiesta Diesel (Y Reg) intermittent starting(flashing immobiliser)


diesel ,,,just bypass the immobiliser ,20mins work

Feb 11, 2009 | 1999 Ford Escort

1 Answer

How can i change my spark plugs on my fiesta mk5 1.4 16v


look up by the fuel rails and you see these funny looking things normally they have two wires on them and the spark plugs are under those and in most cases you have to remove the fuel injecter rails in order to get access to the plugs

Jan 18, 2009 | 2007 Ford F

1 Answer

Ford fiesta 1.3 encore endura engine p reg


hi does the rattle go when you press the brake slightly if so the pads are loose in the caliper it is a common fault with that year of fords escorts feistas etc changing the pads usually clear the problem are they geniune pads if not take them back and change them if there geniune then its got to the pads carrier yates210456

Jul 05, 2008 | 2007 Ford F

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...