Question about Volkswagen New Beetle

1 Answer

I just bought a 2000 vw new beetle and every time I open the passenger door both windows descide to open why? p.s it is not a convertible

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 144 Answers

This relieves the pressure when doors are close if you notice when you shut doors they go up this is normal

Posted on May 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the inside trunk release on a 2000 vw beetle. Trunk lid will not open with key, fob, or door release.


Trunk won open even with manual release http://newbeetle.org/forums/new-beetle-convertible/54170-trunk-wont-open-even-manual-release.html there is good info here C24OF

Dec 21, 2016 | 2000 Volkswagen Beetle

1 Answer

Where are the fuses to unlock the and windows in a vw beetle2000


The fuse block that contains the window fuses is located at the left side of the dash board. Open the door and remove the cover. There should be a diagram in your owners manual, and may be one on the inside of the cover.

Jun 25, 2014 | 2000 Volkswagen Beetle

1 Answer

I need to know how to get my rear passenger window in my 2005 vw beetle convertible back on it's track


If the glass fell down you need a new window regulator....take a chair with you to the VW parts counter so you can sit down when they tell you how much they cost !!

Last one I did was in a 2004 VW NB convertible..... $800.00 installed

Aug 17, 2011 | 2003 Volkswagen New Beetle Convertible

3 Answers

2000 VW Beetle interior lights don't come on when drivers door


The drivers side door latch is bad. Just replaced one in my daughters 99 beetle. $184 dealer part. same thing no lights then alarm will mgo off for no reason, lights will come on at random times while driving, no chime when key is in.

Mar 06, 2010 | 2000 Volkswagen Beetle

1 Answer

2006 New Beetle Convertible Power window opens


needs resetting on the two clamps that hold it in place on the winder mechanism ,not difficult to do ,just take the door panel offf

Sep 12, 2009 | 2006 Volkswagen New Beetle

1 Answer

Window will not lower when door handle is pulled to open door.


VW window motors are known to be problematic. Lucky you had a service contract, otherwise you may have opted to replace the window motor yourself for substantially less cost.

Jun 15, 2009 | 2003 Volkswagen New Beetle Convertible

1 Answer

VW 2000 New Beetle door sensor/car alarm goes off when doors open.


I found a thread - http://forums.vwvortex.com/zerothread?id=1542461 that details the repair of the soldering on the key lock door module. Our 2000 new beetle had the same issue. Also sometimes it refused to start. Soldering pins fixed it all.

Also see http://forums.vwvortex.com/zerothread?id=1015107 for releasing window from track, And door handle from inner panel.

I ripped the door apart and re-solderd the pins. I only had one pin with cracked solder but two others looked thin so I did them while I was in there. It's about a four or five hour project if you have all the tools. (8mm triple square also called an 8mm internal was the hardest to find - Also needed Torx T8 T10 T15 and T30 plus Philips Screw Driver. )
Project is difficult but not too bad for the mechanically inclined. A 7 on a scale of 10.
Since re-soldering pins - no more issues! My guess is that a VW dealer would get $200 for a new moduel plus 5 hours of service time for this gig - easily a $500 to $1000 bill. My cost - several new tools - about $25.00.

May 28, 2009 | 2000 Volkswagen Beetle

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...