Question about 1999 Chrysler Concorde

2 Answers

How do change serpentine, and ac belt on 3.2 ,2001 chrysler concorde. do i loosen nut on tension pully. It is really tight. then how does it looosen to remove belt

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 752 Answers

Beside the pulley on the arm it is mounted on is a square hole. Place a 1/2 drive breaker bar in that hole and push to right or left. One way will looken the belt. It is a very heavy spring so don't do it till you have the belt to replace with.

Posted on May 28, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My chrysler concord 99 belt came off they said it is the main belt what would be the cost and labor to replace this

Posted on Jul 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the serpentine belt on a 1994 concorde?


Remove the alternator/power steering pump and water pump drive belt to gain access to the air conditioning drive belt.
To remove and install the air conditioning compressor drive belt, first loosen the tensioner pulley lock nut, then turn the adjusting screw to raise or lower the tensioner pulley assembly Accessory Drive - 3.3L Engine or Accessory Drive - 3.5L Engine To adjust the air conditioning drive belt, loosen the tensioner pulley nut and adjust belt tension by tightening adjusting screw. Torque pulley nut to 54 N•m (40 ft. lbs.) after adjustment.
The Poly-V generator/power steering belt has an adjustable tensioner pulley located on the timing belt cover Accessory Drive - 3.5L Engine to maintain proper belt tension. To remove or install this belt, Release tension by loosening the tensioner pulley nut and adjustment bolt Accessory Drive - 3.5L Engine Reverse procedure to install and tighten belt to specified tension.

Jul 10, 2012 | 1994 Chrysler Concorde

1 Answer

How is the best way to replace a serpentine belt on a 2005 kia sorento


First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a Socket set and loosen these two belts by turning the tension adjustment bolt, Anti-Clockwise.

You have to remove the first two belts (AC & Power Steering) before reaching the Serpentine Belt.

Now loosen the nut on the front of the lowest pulley before loosening the serpentine belt.

To loosen the serpentine belt, you could either remove the metal skid plate at the bottom of the engine by turning the tension adjustment bolt, Anti-Clockwise or reach down from the top and loosen it with the socket set ( quick & easiest)

Sep 13, 2011 | 2005 Kia Sorento

2 Answers

Need to know how to adjust serpentine belt, please show diagram. 6 cyl engine.


Really don't need a diagram. Loosen the slide bolts on the power steering pump. loosen or tighten the pump by turning the jack screw (long transverse bolt) under the pump. Once the belt is tightened up, lock down the slide bolts and you are finished.

Jun 17, 2010 | 1994 Jeep Grand Cherokee

1 Answer

1999 sebring serpintine belt installation


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.

Click on the following direct Link. It has several Diagrams for your Belt depending on your engine size and options (AC/No AC etc.) AND whether you have Tensioners OR Locking/Adjusting Bolts/Nuts.
IF APPLICABLE: These point out the direction of rotation for the Tensioner in order to loosen and reinstall the Belt.

IF APPLICABLE: These also point out where the Locking and Adjusting Bolts/Nuts are, to loosen the belt and remove; and reinstall the Belt and .

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.


Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/1999/make/chrysler/model/sebring/1999_chrysler_sebring_drive_belt_routing_diagram.htm

Dec 28, 2009 | 1999 Chrysler Sebring

1 Answer

Change belts on 2002 kia optima


Not sure what engine you have , but I had an 02 rio with the 1.5 L . The serpentine belt did not have a tensioner (spring loaded) pulley , the belt tightness was adjusted by pivoting the alternator mount.
If you are takling about the Timing belt , the tensioner pulley wont move (even though it is on a spring ) untill you loosen the bolt in the center.

Nov 09, 2009 | 2002 Kia Optima

2 Answers

Replace 2000 buick park ave serpentine belt


Firt - study & write down (draw) the belt path,,
and be sure about it..

Then - put a wrench on the nut in the center of the tension pully.. Move the tension pully to loosen the belt.. Pull belt off..

Repeat to put new one on..

Should be pretty easy..

Jul 09, 2009 | 2000 Buick Park Avenue

3 Answers

Can't release tension on serpentine belt


the 4.0 didn't come with a spring type tensioner if look under the p/s pump there is a jack bolt hooked to a idler pully loosen nut on front of pully and lossen up the jack bolt till you can get the belt off

Jun 02, 2009 | 1995 Jeep Grand Cherokee

2 Answers

AC belt on 1999 Chrysler 300M


When you replace the AC belt you really should replace the serpentine belt as well, since you will have to take it off already. If you don't do it now it is inevitable that you will have to replace it in like 3 weeks anyway : )

You need to first remove the serpentine belt by loosening the nut in the center of the idler pulley. After that you will need to loosen the push bolt on the side of the idler pulley. The hub bolt is a 15mm size and the push bolt on the side of the tensioner is a 13mm I think. After you loosen it sufficiently, you will need to pull off the old belt.

Next you will need to loosen the tensioner pulley for the AC belt as well. It is the same process. The main issue is space. You will most likely need to raise your car to get at the right angles to loosen these pulleys.

Once you loosen the idler pulley in the same manner as you loosened the other, you can slip the AC belt onto the back of the crank pulley and route it as the diagram under your hood instructs you. Next tighten up the idler pully in the opposite way as you loosend it...tighten up the push bolt until the belt play is within factory specifications, then tighten the hub bolt in the center of the pulley. Do the same for the serpentine belt and you should be up and running in no time. I just performed these tasks on my 2000 300m and I wish someone would have told me this before I started my project. Hope this helps, Good Luck!

Mar 22, 2009 | 1999 Chrysler 300M

1 Answer

Change serpentine belt on 2000 3.2 L Concorde?


undo the belt tensioner.  It's a pulley with a spring inside. 

Mar 16, 2009 | 2000 Chrysler Concorde

1 Answer

Serpentine belt replacement


you can loosen also the nut at the center of the pully. this nut holds the pulley tight. the long bolt that pulls the clamp is just the tensioner but what holds the pulley is the nut at it's center.

cheers,,


drcool

Aug 10, 2008 | 2002 Nissan Altima

Not finding what you are looking for?
1999 Chrysler Concorde Logo

1,103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...