Question about 1991 Toyota Camry

1 Answer

1991 Toyota Camry Temp gauge inoperative

I just had a trans replaced in my 91 Camry 4 cyl. Now the temp gauge doesnt move off cold, and the electric cooling fans run continuously when the ignition is on. Seems like something isnt plugged in properly or something, but I havent found anything obvious, and neither did the mechanic.

Posted by on

  • Anonymous Nov 11, 2008

    I had the same problem. I replaced the coolant temperature switch on the bottom of the radiator and the thermostat. doing so made the needle bounce. The fans come on erratically. I have not yet checked or replaced the cooling fan ECU or sending unit.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 112 Answers

Switch ig. on, ground the sender unit wire for about 3 seconds see if the temp. gauge moves, if so change sender unit, if not then it is a faulty gauge reader.

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

2 Answers

TOYOTA 2.7 COLD START PROBLEMS


I just replaced the cyl. Head gaskets in my 97 toyota 4 runner 4cyl. And i having problems to start the engine when is cold, when is hot start like new

Jun 07, 2012 | 2007 Toyota Hilux 2.7

1 Answer

1991 toyota camry doesnt want to idle keeps shutting off went to goodyear to get trouble code it was a 14 and said something about ignition?


Sounds like a bad coolant temp sensor replace sensor and reset computer.You can reset computer by pulling the ECM fuse or remove the ground cable off battery for 30 seconds.

May 10, 2011 | 1991 Toyota Camry

1 Answer

My heater is blowing lukewarm air but my cold & hot gauge is fine engine is not overheating


just had same problem with 2000 Buick regal , the thermostat was stuck open just a little , just enough so coolant didn't get hot ,so heater doesn't get hot .. not good on cold mornings !! temp gauge never went more than a quarter, should have been almost half

Jan 05, 2010 | 1991 Toyota Camry

1 Answer

91 Town Car - How can I tell if my temp gauge is bad. Right now


The best way to test it is to replace th sending unit.Reove the wire off the sending unit,and see if the gauge pegs out,or falls down.Then ground it,it should have the same effect.It should peg out if you ground the sening unit.When removed,it should fall.This is with the key on.If thi gauge does these things,then replace the sending unit.

Oct 06, 2009 | 1991 Lincoln Town Car

1 Answer

Have fuel and spark 91 camry 4 cyl but won't turn over.


Sounds like he means crank no start there cz.....Get sight of your t-belt and have some turn key and see if belt is moving.

Jun 08, 2009 | 1991 Toyota Camry

1 Answer

Within the last week my '91 Camry LE has gone crazy. First the heater went cold but engine temp. was fine. Then the driver's auto. shoulder belt and the windows (all of them) stopped working and now it...


I had the same exact problem. In between the door and the body theres a wire harnass. Wires coming through the door were cut almost all the way through. cut the black plastic covering off. Only 2 of my wires were cut.

Feb 27, 2009 | 1991 Toyota Camry

1 Answer

91 Toyota Camry Transmission Trouble


first check transfluid for level,color,smell&metal shavings if its dark in color and smells burnt. look to change the trans. or if metal shavings also look to change trans if color is clear red flush trans then pull trans pan change filter refill with now toyota type trans fluid.

Jan 05, 2009 | 1991 Toyota Camry

3 Answers

1991 toyota 4runner sr5 3.0 v-6


i had the same problem after spending $500.00 for toyota to look at it they didnt fix it and suggested i it was the auto trans and i should get it overhauled costing thousands. i didnt believe them and started to do some of my own research into the problem. the coolant temp sensor at the rear of the intake manifold tells the ecu when the engine is at correct operating temp then allows the auto trans shift into overdrive. to rule out any problems with the auto trans i disconnected the plug to the temp sensor and went for a drive when the engine was cold and it shifted straight away into overdrive no problems. you can't leave this disconnected because the engine is hard to start when cold as the temp sensor also tells the ecu that it is cold and allows the cold start injector to inject more fuel into the engine on cold start up.to overcome this i cut the wire to the sensor plug and installed a switch which i installed into the centre console.now i start the car flick the swith use overdrive then swith back to normal after car has warmed up . engine fault light appers on dash when switched on but doesnt matter. i have had this modification for 2 years now no problems.

Jul 01, 2008 | 1991 Toyota 4Runner

Not finding what you are looking for?
1991 Toyota Camry Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...