Question about 2002 Dodge Intrepid

1 Answer

Engine light is on

The car is running fine but the engine light came on yesterday and is still on. I don't have an owners manual so don't know where to begin. I have been running my air conditioning continously for the past 2 months... help?

Posted by on

  • Anonymous Aug 28, 2008

    I have an engine light that stays on. My mechanic replaced an oxygen senser on the left side of the engine. It came on again. The mechanic said the checking computer didn't show anything else. He told me to continue to drive it. What would you suggest???

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

There are a very large number of reasons the check engine lite will come on. Some conditions will clear but the lite will stay on until it is cleared manually. I would susgest taking it to the dealership or too a local mechanic who can use a scanner to read the code that is locked in. If the problem no longer exists than they can clear the code and the lite will go out and if their is a problem with the car the code should give you/them a place to start.

Posted on Aug 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My check engine light came on yesterday, took my 99 expedition to parts store,code read misfire plug#3? How to fix?


Depend on mileage on them. Personally I don't run plugs more than about 50-60K regardless of what the owner's manual says.

Pull plug three and see what it looks like: fouled (dark oily residue, bent electrode, etc. If electrodes seem worn from use and mileage, replace plug--you'll see scooped out area on outer electrode if excessively worn, clear code and see it it runs ok. If it codes again it could be a bad plug lead as well. If code returns then check out lead to plug or replace it. Plug 3 will be on the left bank of the engine third one from the front. Plug order is:

Back

4 8
3 7
2 6
1 5

Front

Firing order 1-3-7-2-6-5-4-8

Feb 21, 2012 | 1999 Ford Expedition

1 Answer

What do all the red gages mean on a oldsmobile intrigue 2000 when they light up red dont have a owners manual theres only one light i don't know


What sing or text have this signal? Check Engine light? Antilokc, Brake, etc, etc.?

Its possible that you need send us additional details or try this link to obtain your 2000 Olds Intrigue Onwers Manual.

Keep us updated.

Sep 26, 2011 | 2000 Oldsmobile Intrigue

1 Answer

Ac on 2001 mustang worked fine yesterday now no ac what to do?


Check the AC fuse, It's located in the power distribution box under the hood, just forward of the strut tower on the drivers side.
It's a 20 Amp fuse in position 24.

The fuse block diagram is in the owners manual, if you don't have a owners manual, you can get it at this free Ford website to view or download.
It's on page 163.

https://www.fleet.ford.com/maintenance/owners_manuals/results.asp

Sep 03, 2011 | 2001 Ford Mustang

1 Answer

Add coolant light is on and I just don't where to add it. I don't have an owner's manual.


Don't know what porsche you're working on so a general answer would be to look in the engine compartment for a resivour bottle Usually white plastic so you can see the level through it.

Aug 26, 2011 | Porsche Cayenne Cars & Trucks

1 Answer

I need to replace the back up light fuse... i do not have a owners manual


Helm.Com --- buy owners manual

Check all the fuses for now, till you
receive the manual

If you don't know where it is,you don't know
it is blown & if it is, replacing it won't fix a thing

Aug 09, 2011 | 2003 Lincoln Navigator

1 Answer

I have a 1998 Ford Expedition, and the licence plate lights don't work. I've replaced the bulbs. I don't have an owners manual so don't know which relay switch to change. Can anyone help?...


Hi, there is no relay, and the plate light run off the same fuse as the tail lights. The problem must be in the wiring or sockets in the back of the truck.

jturcotte_1910.gif

Jul 04, 2011 | Ford Expedition Cars & Trucks

1 Answer

Change oil soon light stays on and service engine soon light has come on.


You reset the change oil soon light by a couple of different ways depending on your model. Your owners manual will let you know. Some is by depressing the accelerator when car is not running but in accessories mode on ignition. Others you can reset through the radio. Take a look at your owners manual on this. For the service engine soon light, take it to a autozone and they will run a diagnostic for free. Then they can tell you just what is going on and will have the part to fix it. It is probably an oxygen sensor if it is otherwise running fine. good luck and I hope this helps.

Aug 08, 2009 | 1997 Chevrolet Monte Carlo

1 Answer

Can I download an owners manual for a 2006 VW Jetta somewhere? I have a light on that looks like an engine, but the car seems to run fine.


owners manuals are available at dealer only . manual would not tell you why light is on . will have to plug scanner in to car to tell what is wrong .

Apr 18, 2009 | 2006 Volkswagen Jetta

Not finding what you are looking for?
2002 Dodge Intrepid Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...