Question about 2004 Ford Explorer Sport Trac

1 Answer

The engine runign for 5 secon and stop - 2004 Ford Explorer Sport Trac

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,399 Answers

Thanks for choosing FixYa and welcome. Do you have a check engine light on? Any info will help. Everything you have did so far. Thanks

Posted on May 28, 2011

  • Richard Hale
    Richard Hale May 28, 2011

    There are many things that can cause this, from plugs, wires, to coil packs and caps. Is your check engine light on?

  • Richard Hale
    Richard Hale May 28, 2011

    If you have a check engine light on, get your computer scanned at Autozone for free. If it is on, it may hold your problem in the computer. of the car. If not, change the plugs and wires. Check all your vacuum hoses also. Check all your wires and make sure they are all connected, same goes for the vacuum hoses. You need to check for fuel pressure and for spark to determine what to do next. Check your spark and fuel pressure now.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Fiat palio 1.6 petrol 2002 model, has a new clutch that is slipping. What can I do to fix it?

First loose your clutch cable if it is manual cable seems like your presure plate not full engage. . And your clutch plate test now ,start engine for 5 minutes to make worm, 2 hand brake on . 3 fit high gear 4rth if is posible rev your engine 2750 to 3250 rpm and hold there when you relise your clutch in 3 secons if your engine turn of your clutch is good if your engine stil going dont hold more the one second after your full relise of your clutch.

Jul 02, 2017 | Fiat Cars & Trucks

1 Answer

Audi a4 s line 2009 cranks for 5 to 6 secons before starting, timing belt and chain replaced also cam sensor and cranksensor, car runs normal with no lack of power but management light is on

It sounds like the electric fuel pump fuel pressure check valve is defective, you need to hook up a fuel pressure test gage at the test port in the fuel supply pipe that sits over the fuel injectors, crank the engine and start it up, let the fuel pressure stabilize then shut it down, if the pressure drops off more than 5 PSI then the pump is defective and you will need to replace it, the pump is inside the fuel tank.

Dec 14, 2016 | Audi Cars & Trucks

1 Answer

I have a 1997 acura tl 3.2 v6 and both fans keep turnong on and off every 5corner seconds whats wrong?

If is constant every 5 secons and u can time it. It may be the temp sensor. Termostat.
If not constant. Wire damage lose conector.

Nov 21, 2011 | 1997 Acura TL Series

1 Answer

I make my oil change on malibu 2005 v6 3.5 I want to know how can i take off oilchange soon I try to reset it by pressing on the button enter for 1 secone in clause switch odometter com at zero oil...

to reset the oil life you turn your key to the run/on position (with the engine off,) and step on the gas pedal 3 times within 5 seconds. You will then see the oil life go to 100%.

Mar 08, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

I have o codes and service engine soon light will not reset or turn off

You may have a faulty Computer- if the car is running you may be ok Make sure it's not the oil-service light thta's on- you reset that by having the odometer displaying the total miles, then turn off the igntionfor a moment. Then turn igntion on - don't start the motor- then with-in 5 seconeds press the gas pedal to the floor. this resets the oil service light.

Jan 17, 2011 | 2002 Oldsmobile Alero

1 Answer

My 1994 bronco fuel pump is not working, is there a relay i should check first before removing the fuel pump?

Best thing to do is check voltage at fuel pump harness, have some one turn key on and off every 5 secon's, probe wire's at fuel pump harness, one of the wire's will have voltage for about 3 secon's, if you do fuel pump is getting voltage, some time while cranking engine and hitting gas tank with hammer at the same time, fuel pump will start working again, if it start's, you will still need to replace fuel pump or it will happen again, fuel pump is in fuel tank.

Aug 06, 2010 | Ford Bronco Cars & Trucks

1 Answer

Don't have 12v(only one wire has 5v) at fuel pump w/ignition in the on position. All four wires in harness have continuity.

If your checking fuel pump voltage, check other wires while cranking that will be fuel pump voltage and will only have voltage while cranking, or 3 to 5 secon after stop cranking. the one 5 volts will be gas gauge.

Nov 16, 2009 | 1997 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5677 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides