Question about Acura Legend

2 Answers

Need a cooling fan wiring diagram - Legend Acura Cars & Trucks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

Turn the AC on, both fan should be working, if it doesn't run it needs replacement. If both fan run while the ac is on then they are good. Now turn off the AC. Idle the car. When temp reaches about passed halfway at least one fan should turn on. If none of them turns on then there is a bad fan switch ( it looks like a temperature sensor bolted on usually by the thermostat housing). Here is the procedure to test the fan switch: First remove it from the car, tie a string to it and dip it in hot water ( boiling or near boiling temperature). You would notice a click as the contact switch closes inside. Sometimes you will not hear a click but to make sure measure that pins with a continuity tester.

Posted on May 28, 2011

Local Repair Shop

They should print what you need from
whatever data base they are using

May want a couple dollars,
get anything you can think of if
they seem helpful

Posted on May 28, 2011

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: wiring

pls send me your car chasis number to send the wiring diagram

Posted on Jun 06, 2009

  • 184 Answers

SOURCE: cooling fan works when hot wired relay checks out

Your fan thermostat is bad. It is probably mounted to the radiator.
Good luck.

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Lt1 Camaro cooling fans operate like this; Cooling fans (2 fans) come on 30 seconds after start up on high, stay on while driving, and turn off when brakes are applied. Stock car, no mods.


Did you have it checked for DTC'S - diagnostic trouble codes ? The cooling fans are controlled by the PCM - engine computer , with the use of three relays ,located in the under hood electrical center . Do you know how to do electrical testing ?
Relay Driven Dual Cooling Fan Diagnostics Looking at wiring diagrams i don't see any connection between the brakes an cooling fans . Checking for DTC'S an doing electrical testing of control circuits from the PCM , Power circuits from the fuse / relay box . Checking grounds an pulling relays ,check for corrosion .

Electric Testing Techniques You Need to Know

View wiring diagrams here http://www.bbbind.com/free_tsb.html

ECM Inputs and Outputs Diagnosis


Mar 30, 2017 | Cars & Trucks

1 Answer

I'm in need of the engine bay wiring diagram for a 1980 Honda Prelude, specifically for the cooling system/thermo-fan.


Try jumping the green cooling fan switch with a wire and see if it turns on while the car is on, if it does then it's probably your module.

Jan 01, 2017 | Honda Prelude Cars & Trucks

1 Answer

Wiring for cooling system ford escort zetec 1996 1.6i


Wiring for cooling system ? You mean cooling fans ? 1.6 ? This vehicle has 1.8 L or 1.9 L . This cooling system has two electric cooling fans . Three relays , cooling fan power relay , cooling fan hi speed relay an the low speed cooling fan relay. The powertrain control module controls these relays. Go here http://bbbind.com/free_tsb.html free wiring diagrams .

May 15, 2016 | Ford Cars & Trucks

2 Answers

Where can I get a cooling fan wiring diagram?


The cooling fans should come with a sensor and tells fans to come on at certain temperature

Jan 02, 2016 | 1998 Plymouth Voyager

1 Answer

Need wiring diagram for 1994 cadilac sts cooling fan


I am sorry but fixya has no wiring diagrams. Try this link. www.alldatadiy.com

Apr 21, 2013 | Cars & Trucks

1 Answer

How to rewire the fan relay connector


Not exactly sure as to wich fan relay you are talking about (cooling fan or the relay for the blower motor for the air conditioning) Kind of took a guess and went with the engine cooling fan relay. Below is a wiring diagram for that relay.If you need the other relay, a larger wiring diagram as this was the largest I could post on here or if you need pictures of the connectors as well. You can email me directly at csautomotivecars@att.net and I will be happy to email what you need back. Hope this helps....


9_18_2012_10_01_52_pm.jpg

Sep 18, 2012 | 1990 Pontiac Sunbird

1 Answer

Wire diagram for the a/c cooling fan.. 1991 Jeep Commache


I am sorry but fixya doesn't have any wiring diagrams. They are copyrighted and not free to share.

Jul 22, 2012 | Jeep Comanche Cars & Trucks

2 Answers

Cooling fan is not coming on at all how do i wire it up to come on when car is started and stops when car is turned off


Here is a wiring diagram of how you should by-pass that cooling fan by using a toggle switch, and you can get a fuse holder and use a 30 amp fuse instead of a 30 amp circuit breaker, but you should use the circuit breaker since you are no longer using a relay, and if there is a voltage spike the circuit breaker will reset itself, and a fuse will blow out and you will have to change it. Most auto parts stores will carry the 30 amp toggle switch and circuit breaker, also be sure to use 10 ga. wire and do not forget the wire connectors that you will need to attach the wires to the toggle switch, the circuit breaker, and to the battery as well as the connection to the cooling fan wires.

This wiring diagram is very basic and you should be able to follow it with little difficulty, and you should also dis-connect the cooling fan at the wiring connector to the cooling fan and connect the by-pass wiring directly to the cooling fan motor so that you do not run voltage back through the stock system. Let me know if you require further assistance.


28bf7b1.jpg

Jun 04, 2010 | 1992 Pontiac Bonneville

1 Answer

Cooling fan inop


the cooling fan is a one speed motor. operates only with key on.
The integrated control module (ICM) and the engine computer control the fan.
on at 102 degree C (@ 230 F), off at 99 degrees C (@ 230 F).
You have 3 fusible links, 2 18 gage brown and on 20 gage dark blue providing power to the ICM. You should ahve 12 volts the pink/black wire, the black/orange wire and the yellow wire going into the ICM.

First, jumper 12 volts from the battery directly to the terminal on the motor where the dark blue wire goes. Make sure the black wire is grounded. If the fan works, check the items above.

I can sell you this Ford wiring diagram book for a 91 Mustang for $10 if you are interested.
please rate as solved if this helps you, thanks.

Apr 22, 2009 | 1991 Ford Mustang

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...