Question about 1999 Chevrolet Blazer

2 Answers

My hood release lever broke..how can I open my hood??

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 88 Answers

You should be able to still grab the cable with some pliers and pull on it. If you can't see the cable, you can pull off the kick panel to access it.

Good Luck!
~Brandon

Posted on May 28, 2011

  • donovanbarne May 28, 2011

    Thanks man..I thought so but didn't want to do any damage..

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

If the lever broke then get a pair of pliers and go to where your hood release lever is and see if you can located where the wire is that is routed from the there to the front of the hood. Then that way you can manually release it. If there is no visible brake cable anywhere then you best chance is to reach with your hands or pliers as well if they fit under the hood to there the hood release lever is and try and pull the wire from there. All in all if none of that works then your best bet is the dealorship.

Hope this Helps!

Posted on May 28, 2011

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bmw_tech_38
  • 113 Answers

SOURCE: Hood Won't Open, and Lever Broke

Hi viper852004 , the only way you can do this is to remove the front grills and then you will be able to see the 2 sprung bonnet pegs, you will need to loosen the adjusting nut where it screws into the hood and unscrew it until it becomes unattatched from the hood, do this for both pegs and then you should be able to release the hood to fix the problem. the pegs will need to be reinstalled before driving the car as the hood will not close, hope this is of some help, regards mark.

Posted on Jan 26, 2009

  • 401 Answers

SOURCE: My Gas door lever broke how do I now open the gas

Hi open the rear luggage compartment and remove the LEFT wheelhouse trim pannel both rear quater trim pannels and rear trim pannel u will see the release cable now u can open it works on PONTIAC WAVE

Posted on May 04, 2009

  • 38 Answers

SOURCE: can't open hood

if you can still get to the little steel cable, a extremely tight pair of vise grips and a moderate amount of force will do the trick.

Posted on May 12, 2009

defadad
  • 351 Answers

SOURCE: hood release will not release hood cable is not broken

the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet

Posted on May 23, 2009

greg_margo
  • 1959 Answers

SOURCE: 1996 Chevy S10 Hood Latch will not open

The best solution I've come across is a coat hanger used to pull on the cable from under the hood to get the latch to release. You can either place it through the grill or if there's room, just under the hood. Best of luck.
Greg

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hood release is broke need to get hood open


Hi,
Locate the cable behind the hood opening lever, use a vise grip, pull the center cable(wire) and it wil open ur hood!

May 11, 2011 | Pontiac Fiero Cars & Trucks

2 Answers

How do I open the hood of a Mitsubishi L300 ?


  1. Locate the interior hood-release lever under the dashboard on the driver's side of the interior of the car.

  2. 2

    Lift up and toward you on the hood release lever. The lever is connected to a cable that releases the hood. The hood will pop up about 1/2 inch when you pull the lever.

  3. 3

    Move to the front of the car and locate the exterior hood-release lever under the front of the hood. It is located near the middle of the vehicle, just beyond where the front edge of the hood meets the body. Lift up on the inner lever.

  4. 4

    Lift up on the edge of the hood while holding the inner lever in place. When the hood is up, find the hood prop and raise it, setting its tip in the hood-prop mount on the hood, to hold the hood up while you work in the engine bay.



Read more: How to Open the Hood on a Mitsubishi Endeavor ' eHow.com http://www.ehow.com/how_6301122_open-hood-mitsubishi-endeavor.html#ixzz16Ou5FhQF

Nov 26, 2010 | Mitsubishi Lancer Cars & Trucks

1 Answer

Broken VW New Beetle hood release


try to look for the cable attached to the lever that opens the hood, once you find it pull it, that will open your hood

Jan 14, 2010 | Volkswagen Beetle Cars & Trucks

1 Answer

Release cable is broken on 2000 grand prix unable to open the hood


depend where it`s broke if lever inside the car is broke try getting some plyers on the cable to open the hood and replace cable once hood is open

Oct 07, 2009 | 2000 Pontiac Grand Prix

2 Answers

Broken hood release on 98 chev 1500. How can I get it open?


if it is broken at the handle you should be able to grasp the cable with pliers to pull it otherwise you will have to go out front of truck and the best way i found requires long arms, but you would have to use a flashlight and slide under front bumper and look upward to find cable/latch assembly. You may be able to do it through the grill but if cant see it through the grill under neath.if you in front of truck pull latch to right and it will release.

Sep 02, 2009 | 1998 Chevrolet C1500

1 Answer

1987 190d mercedes, hood release cable broke


crawl under the front of your car and by sight or feel find the broken cable and pull on it to open your hood.also it the cable is too short feel if you can find the lever from under the car to release to hood.

Jul 23, 2009 | Mercedes-Benz 190-Class Cars & Trucks

2 Answers

Hood release broke


you are going to have to either remove the panneling to get at the cable and pull it with vise grip or try to get up inside the hood from the front and release the latch that way . either way is going to be tough to get to.

Mar 01, 2009 | 2000 Dodge Intrepid

1 Answer

Hood Won't Open, and Lever Broke


Hi viper852004 , the only way you can do this is to remove the front grills and then you will be able to see the 2 sprung bonnet pegs, you will need to loosen the adjusting nut where it screws into the hood and unscrew it until it becomes unattatched from the hood, do this for both pegs and then you should be able to release the hood to fix the problem. the pegs will need to be reinstalled before driving the car as the hood will not close, hope this is of some help, regards mark.

Jan 23, 2009 | 2003 BMW 325

1 Answer

2003 ranger.the hood will not open. i think cable is loose /broke


You will need 2 people to get the hood open. While you pull on the hood release cable have an assistant gently pound on the center of the hood until it pops up. If this does not work, inspect the hood release lever to see if the pivot broken, if so pull directly on the cable with a pair of locking pliers. After you get the hood open make sure to spray the latch with penetrating oil (WD40)

Dec 17, 2008 | 2003 Ford Ranger Regular Cab

2 Answers

Hood on my 1995 Toyota Tercel won't open


Someone just successfully helped me with a similar problem. IF the cable is Not broken, ie: still taunt when one pulls the hood release lever in the car, then the latch under the hood is simply stuck. Try this. Have someone bounce/press down on the front center of the hood where the latch is located to relieve spring tension. At the same time have someone pull the Hood Release lever inside the car. This may pop open the front hood. Then after the hood opens spray WD40 on the hood latch to rid the rust which likely is the cause of the problem. BTW...don't know what you mean about the Oil Light comes on. You don't need the engine turned on to open up the front hood, at least not on my model (2door sedan).

Oct 23, 2008 | 1995 Toyota Tercel

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...