Question about 2004 Hyundai Santa Fe

2 Answers

Do you use the same instructions to change windshield water pump as you would use to change washer reservoir on a 2004 hyundai sanda fe

Posted by on

2 Answers

I guess so

You shouldn't need instructions for
much of any kind of vehicle repairs,
as long as they are purely mechanical
& fairly easy

You remove the washer reservior, then the
pump inside the plastic tank.

Posted on May 28, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

Some cars you can remove the pump without taking off the reservoir. If you can't access it without removing the reservoir, then use same procedure. Then ones removed pump can simply be pulled out.

Posted on May 28, 2011

Testimonial: "thanks good tip"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Hyundai Santa Fe Windshield Washer Pump no noise no fluid comes out front or back


Most likely you will need a new windshield washer pump which will plug into the windshield washer plastic bottle when you unplug the old one.

Jun 02, 2017 | Hyundai Cars & Trucks

1 Answer

How do you replace the windshield washer pump on 2008 ford focus, wipers work but no spray comes out


The hose could be clogged ! Do you know where you add the washer fluid ? Somewhere on the bottom of that plastic bottle is the washer pump .
Removal and Installation
> WARNING: Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on label of washer solution container. Failure to follow these instructions may result in personal injury.
> CAUTION: When replacing the windshield washer pump be careful not to damage the rubber grommet.
> CAUTION: Do not operate the windshield washer pump before filling the reservoir. Failure to do so could result in premature pump failure.
  1. NOTE: When installing the reservoir, the filler neck must be lubricated using a water-based lubricant.
    Remove the bolt and the windshield washer reservoir filler neck.
  1. Remove the RH fender splash shield. For additional information, refer to Section 501-02 .
  1. Remove the foam filler and remove the retainer.
  1. Remove the 2 screws and the accessory drive splash shield.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the nut, 2 bolts and position the A/C accumulator aside.
    • To install, tighten to 9 Nm (80 lb-in).
  1. Unclip the A/C lines from the inner fender well.
  1. Drill out the rivet and remove the bracket.
  1. Remove the 2 bolts, slide the windshield washer reservoir assembly forward to release it, and position the washer reservoir aside.
    • Install the upper bolt followed by the lower bolt, and tighten to 5 Nm (44 lb-in).
  1. Disconnect the windshield washer tube assembly from the pump and release the windshield washer tube assembly from the washer reservoir.
  1. Disconnect the electrical connector from the windshield washer pump.
  1. Release the wiring harness from the reservoir, and remove the washer reservoir.
  1. To install, reverse the removal procedure.

Apr 07, 2015 | Ford Cars & Trucks

1 Answer

2004 hyundai santa fe power steering pump is squealing


sound like you have lost presure switch that is supposed to relive presure when presure is high or the belt is too tight putting presure on the bearing causing over heat or oil cooler restricted and not coolling the oil

Jun 22, 2014 | 2004 Hyundai Santa Fe

2 Answers

We have a 2004 Hyundai Santa Fe where the windshield washer pump won't spray water on the windshield. We have checked the fuses, blew air through the hose- seems fine and the holes do not seem clogged. ...


Same problem with my 2002. remove lower panel in front of passenger side wheel (panel does not need to be removed, just moved out of the way by loosening some reusable srews). You will see the two hoses leading to the pump. Remove the pump and you will see that the inlet is plugged with a white residue. Remove the residue by spraying with water gun on hose or brush a way carefully, there is a wire screen under the residue that is keeping the residue from entering the pump. Flush the tank out while the pump is removed. Re install everything and it should work fine again. Remove the pink foam thing in the reservoir as that is what has disentigrated and plugged the screen to begin with. There is only 1 pump with 2 outlets, not 2 pumps as another poster listed.

Jun 11, 2010 | 2004 Hyundai Santa Fe

1 Answer

HOW TO REPLACE WINDSHIELD WASHER PUMP 2003 SANTA FE


Visit a full service Auto Parts place. They have the motor and pump and will be glad to tell you how to replace it.

Thanks for your question at FixYa.com

Jan 15, 2010 | 2004 Hyundai Santa Fe

1 Answer

2004 Hyundai Sante Fe has hard steering and whining at low idle. Changed Power steering pump and reservoir, and rack and pinion, flushed system. No change


HI check your power steering oil pump reservoir filter screen this seats at the bottom of reservoir is probably plug .it can cause the pump to aerate if thats your case replace reservoir.for proper inspection of reservoir completely empty it and check. hope this helps.

Sep 25, 2009 | 2004 Hyundai Santa Fe

1 Answer

Hyndai Coupe 2001 -front windscreen washer pump needs replacing


I suspect the pump is inside the reservoir. The link is for a Hyundai Elantra (2001-2006) and shows how to get to it for this model. Hope this helps!
How To Install Replace Windshield Washer Pump Hyundai Elantra 01 06 1AAuto...

Aug 04, 2017 | 2001 Hyundai Accent

1 Answer

Windshield washer pump


if it is the same as a 2002 UK spec then the washer pump is situated at the bottom of the washer bottle. the washer bottle is situated behind the inner guard on the same side as the filler cap for the washer bottle.
the pump is push fitted to the water bottle.
if u have been using window washer additives then they can form a slime that stops the pump working.
if that is the case then remove the pump and wash it under the warm tap to clean it out and refit.
hope this helps
oscargilpin

Mar 22, 2009 | 2004 Hyundai Santa Fe

2 Answers

Hyundai santa fe. Washers not working properly.


there is a screen filter on the washer pump suction line where it draws cleaner from the fluid reservoir, it must be plugging up, this is very common.

Dec 11, 2008 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...