Question about 1991 Lincoln Town Car

1 Answer

I need to replace the instrument panel bezel. How do I remove the headlight switch in order to remove the dash bezel?

Posted by on

  • Anonymous Mar 29, 2014

    replace headlight switch

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 14,036 Answers

DISCONNECT NEGATIVE BATTERY CABLE FIRST,REMOVE HEAD LIGHT SWITCH KNOB, REMOVE THE AUTO DIMMER KNOB. REMOVE THE RIGHT AND LEFT MOULDING FROM THE INSTRUMENT PANEL BY PULLING AWAY FROM THE INSTRUMENT PANEL AND SNAPPING OUT OF THE RETAINERS.REMOVE 12 SCREWS RETAINING THE FINISH PANEL AND REMOVE THE PANEL,REMOVE THE 2 HEADLIGHT SWITCH BRACKET RETAINING SCREWS AND PULL THE BRACKET AND SWITCH FROM THE INSTRUMENT PANEL,REMOVE THE NUT RETAINING THE SWITCH TO THE BRACKET, DISCONNECT THE CONNECTOR AND REMOVE THE SWITCH.

Posted on May 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the headlight switch assembly on a 1997 dodge grand caravan


The best I can offer is for a 1996 caravan:

REMOVAL
  1. Remove steering column cover.
  2. Remove over steering column bezel.
  3. Remove left end cover.
  4. Remove screw at left end of cluster bezel and headlamp switch.
  5. Remove screws holding cluster bezel to instrument panel from each side of steering column.
  6. Disconnect clip holding cluster bezel to instrument panel from above right vent louver.
  7. Separate cluster bezel from instrument panel.
Disconnect wire connectors from back of the bezel.

INSTALLATION
  1. Connect wire connectors into back of the bezel.
  2. Place cluster bezel in position on instrument panel. Use care not to place hands on louvers.
  3. Connect clips to hold cluster bezel to instrument panel. Use care not to add pressure on the A/C louvers to seat the cluster bezel clips.
  4. Install screws to hold cluster bezel to instrument panel on each side of steering column.
  5. Install screw at left end of cluster bezel and headlamp switch.
  6. Install left end cover.
  7. Install over steering column bezel.
  8. Install lower steering column cover.



25677031-lce4vfjfhjrgmukp0vzfrbis-3-0.gif

May 02, 2015 | 1997 Dodge Grand Caravan

1 Answer

Replacement of headlight switch on 2002 chrysler concorde lsi


the following is the factory service manual for your car:

http://oskin.ru/pub/chrysler-dodge/manuals/Service%20Manuals/2002_LH_300M_Concorde_Intrepid/02lhe.pdf

goto page 8L- 21

  • (1) Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
  • (2) Remove the left end cover, left instrument panel trim cover, and the cluster bezel. Refer to the various Removal and Installation procedures in this section.
  • (3) Remove the three screws retaining headlamp switch to cluster bezel.
  • (4) Remove headlamp switch from bezel.
a youtube of a dodge durango has a similar switch on their dash as well: except for the column shifter


Apr 12, 2015 | 2002 Chrysler Concorde

1 Answer

How do I remove the left side air vent cover?


Clips hold it in place , take a flat screw driver with some tape around the end , so you don't damage you dash panel ! Stick the screw driver between the dash panel an the vent cover an pry it up . Be carful plastic , Once you get it started you can get you hand , fingers behind an pull ! good luck hope this helps !
Instrument Panel Outer Air Outlet - Left
Tip
  1. Using a flat-bladed tool release, the headlamp bezel assembly from the instrument panel.
  2. Disconnect the headlamp electrical connector.
Using a flat-bladed tool release, the air outlet from the headlamp bezel.

Mar 14, 2015 | 2007 Buick Lucerne

1 Answer

Need to find out how to change the turn signal/headlight switch on a 2001 Dodge Neon


dissconnect negitive battery terminal, open dirvers and passenger doors.remove dash end caps then use a pry stick or screwdriver and pry out left and right A pillar trim panels. next is to remove the bezel, lift up on the outter bottom edges of top bezel and along rearward edge of top cover top disengage clips, pull top cover rearward intil pins disengage from instrument panel and then remove from dash, next is to remove the cluster bezel and then the top and bottom steering column covers, the next step is to remove the screws holding the switch. then the connectors to switch.lift switch straight up and remove. to install reverse removal procedure. heres a diagram to help you understand the covers and bezels locations. hope this helps good day.johnjohn2_135.gif

Jun 25, 2011 | Dodge Neon Cars & Trucks

1 Answer

The headlights doesn't turn on. already change bulbs.


Your headlight switch needs to be replaced. Here's the section from the maintenance manual.

Headlight Switch REMOVAL & INSTALLATION

1996 Dakota
  1. Disconnect the negative battery cable.
  2. Remove the steering column cover and remove the instrument panel bezel. Two screws are hidden behind the steering column cover.
  3. Remove the screws from the headlight switch bezel, pull the assembly out and disconnect the wiring.
  4. Remove the nut retaining the bezel to the bracket. Depress the spring button on the right side of the switch and remove the headlight switch knob and stem.
  5. Remove the spanner nut and remove the switch.
  6. The installation is the reverse of the removal procedure.

Feb 01, 2011 | 1996 Dodge Dakota

2 Answers

95 ram 1500 Headlights will not come on but I can hold the bright switch back to work the bright lights. I didnt see any fuses blown and I did not see any relay's. I noticed a couple of weeks ago that i...


Hello kelly fox: my name is Roger and I will help you. There are only a couple of things most likely to be the problem. I would look at the head lamp bulbs first. I have had the same problem of both lamps suddenly burn out on my dodge ram. The only other component is the multi function switch could have a problem. This could happen but most likely the bulbs are the issue. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Nov 20, 2010 | 1995 Dodge Ram

1 Answer

Is it difficult to replace the headlight switch on my 87 Chrysler 5th Ave.? When I turn-on the headlights, they don't turn-on real good...I have to pull the switch out, fully, several times for them to...


Pretty simple actually....here is the directions on how to do it:

  1. Remove the headlamp switch bezel from the instrument panel by unsnapping the attaching tangs.
  2. Remove the 3 screws securing the switch mounting plate to the instrument panel, then pull the switch and mounting plate rearward and out of the instrument panel opening.
  3. Disengage the electrical connector at the switch. Press the release button on the bottom of the switch and then pull the knob and shaft out of the switch.
  4. Detach the headlamp switch escutcheon from the mounting plate by unsnapping the attaching tangs and removing it, then unscrew the switch-to-mounting plate retaining nut and pull the switch off the mounting plate.

To install:

  1. Position the switch onto the mounting plate and install the retaining nut, then snap the headlamp switch escutcheon back into position.
  2. Slide the knob shaft into the switch until it locks. Reattach the switch electrical connector.
  3. Install the mounting plate onto the instrument panel. Install the 3 attaching screws.
  4. Snap the headlamp switch bezel back into position.

Nov 01, 2010 | 1987 Chrysler Fifth Avenue

1 Answer

How do I replace dimmer switch on 2001 Tahoe?


Removal & Installation (If dimmer is on headlamp switch area) To Remove:
Instrument Cluster Bezel removal chevy_sub15_02-04_instrum_clust_bezel_rem.gif

  1. Remove or disconnect the following:
    • The instrument cluster bezel
      1. Unsnap the switch from the housing
    • The electrical connectors Headlight switch removal chevy_sub15_02-04_headlight_switch_rem.gif

    • The switch
To Install:
  1. Install or connect the following:
    • The electrical connectors
    • The headlamp switch by snapping the headlamps switch into place
    • The bezel to the instrument panel
  2. Operate the headlights to check performance
prev.gif next.gif

Jul 16, 2010 | 2002 Chevrolet Tahoe

1 Answer

I need to replace globe on instrument panel. How do I dismantle the dashboard in order to get to the globe. I have a 1994 Ford Falcon ED Futura Cheers


the instructions are as follows:-- The dash on a Ford is made up of numerous trim panels that help contain the instrument panel, cluster and other components. You will likely need to remove any to all dash panels to work on any parts in the front of the truck, and you will need to remove some panels first to remove others. Please note that the removal procedure can vary greatly depending on the model year of your car. 1) Disconnect the truck's negative battery cable by peeling back the insulator if one is equipped and loosening the clamp nut for the black cable with a wrench. Set this cable aside so it won't accidentally come into contact with the battery post during the dash removal.2Remove the driver's-side knee bolster by removing the two screws located at the bottom (they should require a Phillips-head screwdriver) and prying around the top of the panel with a trim stick, flat screwdriver or other dull, flat-bladed tool to release the panel from its clips.3)Unscrew the screws for the instrument cluster bezel, which surrounds the cluster and steering column; these screws are at the two lower corners. Use the trim stick to release the bezel's clips at the top end, pry it off and disconnect any electrical connectors attached to it. You may need to remove the steering wheel in order to remove this bezel.4)Work the trim stick or other flat tool around the entire edge of the instrument panel center bezel--which surrounds the stereo and heater/air conditioner controls--to release it from its clips. This one panel has no screws to remove.5)Remove the screws for the upper finish panel, which aren't accessible until you remove the instrument panel bezel, and remove the panel from the dash.6)Open up the glove compartment door. Press the two sides of the compartment inward until until its bumpers clear the stops. Remove the fasteners at the bottom of the box to remove the glove compartment.7)Remove the pushpin fasteners that secure the center brace cover at the bottom of the panel and remove the panel. This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Mar 02, 2010 | Ford Futura Cars & Trucks

1 Answer

1998 ram 1500 ext cab 4x4


Just remove the instrument panel bezel, not the dash, very simple job.

Oct 14, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
1991 Lincoln Town Car Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...